Review of CE Smith - Trailer Leaf Spring Suspension - CE14035G40 Video

We do have a couple of bolt-on spring hangers #CE14017G and #CE14016G but they are designed for slipper springs and not double-eye springs like #e77SR. Its not likely that professional welder would charge that much. You might be able to find one…

The difference is found in the application. The Slipper Spring styles, like part #SP-179275, are intended for use with more heavy duty applications, while the Double Eye styles, like part #e77SR are used to provide a more comfortable ride. The part…

Since you've got an aluminum frame trailer, I understand why you're looking for a bolt on solution. The only available bolt on hangers we have available would be the #CE14017G and #CE14016G but they are designed for slipper springs and not…

As long as both the axles and slipper springs are appropriately rated for the planned loaded weight of your trailer, there's no problem with using slipper springs instead of double-eye models. Slipper springs are actually typically used for more…

When selecting the correct replacement axle for a utility trailer you will need to know both the hub face (wheel center) and spring center measurements. For example, if your current hub face measurement is 88" and you replace this with an axle…

To order an axle, you will want to know a bit more information. First, you will want to know the hub face measurement. This is considered the length of an axle. The hub face is measured from the base of one wheel stud to the base of the wheel stud on…

The bolt hole spacing for the CE Smith Front/Rear Hanger Bracket for Double-Eye Springs #CE14026G is 4-3/8" x 1-5/8". I've attached a dimensional photo for you to check out as well as a review video to reference.

We only have 2 options for bolt-on hangers: - CE Smith Front/Rear Hanger Bracket for Double-Eye Springs #CE14026G which have an inside width of 1-1/4" - CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs #CE14035G40 which have an…

You have a really interesting suspension setup on your trailer. I don't know what the width of the channel is that your springs attach to but to go to a double leaf will require using a hanger kit like the part #APS4 that you referenced. If you…

The only hanger kits we have that are bolt on are the #CE14035G40 and #CE14026G. Your typical double-eye leaf spring is going to be 1-3/4" wide so neither of these would work. This means the only option would be weld-on hangers. For replacement…

The best way to choose the correct replacement leaf spring for a trailer is to measure the existing spring. If this cannot be done however then you can get a good idea of what the spring length will be based on the hanger spacing but this is not as…

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…