Recommended Leaf Spring Length for Single Axle Trailer Hanger Spacing of 22-1/2"
Question:
What size double eye leaf spring do I need for a trailer with existing mounting brackets that are 22.5 apart. The axle is a 2200 lb axle. This is for a small boat and I am redoing an old trailer
asked by: Harold S
Helpful Expert Reply:
The best way to choose the correct replacement leaf spring for a trailer is to measure the existing spring. If this cannot be done however then you can get a good idea of what the spring length will be based on the hanger spacing but this is not as exact as the length of the shackle comes into play as well. If you measured the leaf springs hangers on center then I recommend using the 3-Leaf Double-Eye Spring part # SP-113275 which is 23-1/2" long. I'd also recommend the Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS4 which comes with the rest of what you need even if you do not use the new hangers.
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 23-1/2 Inch Long
- Painted
- Universal Group
more information >
Continue Researching
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Search Results: double eye
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Shop: CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Black Rubber
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Video: Review of CE Smith Trailer Leaf Spring Suspension - CE14026G
- Video: Review of CE Smith - Trailer Leaf Spring Suspension - CE14035G40
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE32005G Review
- Video: Universal Group Trailer Suspension - Leaf Spring Suspension - SP-113275 Review
- Q&A: Bolt Hole Dimensions for CE Smith Front/Rear Hanger Bracket for Double-Eye Springs
- Video: Review of etrailer Trailer Fenders - Single Axle Fender with Backing Plate - HP36VR
- Video: etrailer Radius End 4-Leaf Slipper Spring Installation
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - 28-5 Review
- Article: Double-Eye Trailer Suspension System Review
- Search Results: fender
- Search Results: slipper
- Search Results: hanger
- Q&A: Replacement Hangers for Single Axle Trailer
- Q&A: Compatibility of Trailer Suspension Hanger on 2 x 2 Inch Frame
- Q&A: Do the Shackle Straps Go Inside or Outside the Leaf Spring Hanger
- Q&A: Can Leaf Spring Shackle Straps Be Installed Between Leaf Spring and Front Spring Hanger
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: What Is the Hole Spacing of the Leaf Spring Hanger 28-5