Bulldog Winch Electric Winch BDW20011 Review Video

Yes, there is! To add a hitch to your 2024 Jeep Wrangler Unlimited Rubicon you will want the Draw-Tite item #65079. This front mount hitch is custom fit and bolts to your Jeep with included hardware. It has a 2" receiver that can tow up to a…

What you need for your 12K winch is the trailer and vehicle electric winch wiring kit #BDW20207. It comes with everything you are looking for with 2 AWG Double Wire, consists of a 24 foot wire - runs from the rear of the vehicle to the battery, and…

The type of SB quick connect connector that the Bulldog Winch Booster Cable Set #BDW20197 has would be considered the standard 50 amp quick connect size.

Yes, the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles part #BDW20011 will work with the Warn Electric Winch M12 as they both use the same industry standard winch mounting hole spacing which is 4-1/2" wide x 10 long.

In order to find the correct size wire for a winch you'll need to know the amp rating. The Bulldog Winch Trailer Winch part #BDW10040 for example which has a 12,000 lb capacity and can pull anywhere from 65 - 400 amps depending on the load. It…

The Supwerwinch #SW49GR is made in China. R&D and distribution is based out of California, but the winches are not made here.

I do have an option for you but the ComeUp Seal Slim Gen2 Off-Road Winch - Synthetic Rope part #CU295057 is a foot forward mounted winch only which is not very common. The standard mounting position of a winch is feet down, I recommend to use the…

You will not have fitment issues with the dimensions of your Badland Apex 12K winch. The Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles #BDW20011 places the handles apart 26-5/8" so you will have approximately 5-3/8" left or…

Yeah I think your tongue weight estimation is about right and you are correct a weight distribution like the Fastway e2 part #FA92-00-0800 would be ideal as it has a tongue weight range of 400-800 lbs.

The round or trunnion bars refers to the end of the spring bars. Round bars are typically designed for lighter applications, are a bit harder to install and are usually priced lower than trunnion bars. Trunnion bars are typically designed to be used…

This installation requires that you remove the front bumper because the hitch receiver is completely hidden once it is installed. You will not see the cross tube for this hitch receiver, at all, when looking at the front of your 2019 Ford F-250. In…

The Trailer and Vehicle Electric Winch Wiring Kit #BDW20207 on your Badlands 12,000 winch will work well. The 2 AWG wire will be adequate for your winch as it is confirmed to work on Superwinch winches up to 16.5k in capacity.