How To Choose Correct Size Wire for 12K Winch on Rear of Vehicle
Question:
Purchased a 12,000 ton badlands winch and want to mount it on the rear on my truck using a hitch mount. And would like your thought on size welding cable I should use to connect to the battery up front. About 20 to 25 feet away from winch
asked by: William S
Expert Reply:
In order to find the correct size wire for a winch you'll need to know the amp rating. The Bulldog Winch Trailer Winch part # BDW10040 for example which has a 12,000 lb capacity and can pull anywhere from 65 - 400 amps depending on the load. It would take a very large wire to handle this much power over a distance from the front of the vehicle to the rear and that is not something we offer unfortunately. If you were only pulling out small loads then you could get away with the Bulldog Winch Rear Wiring Kit part # BDW20348 which uses 1 gauge wire otherwise you would need to stick to the front of the vehicle due to the distance from the battery.
If you want to get super technical, you can use some online calculators for wire size based on your load and winch rating.
If you don't already have a mount for the winch, I recommend the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles part # BDW20011 which can be used on either the front or rear.
Products Referenced in This Question
Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles - 2" x 2" Hitch
- Accessories and Parts
- Electric Winch
- Mounting Hardware
- Plates
- With Handle
- Bulldog Winch
more information >
Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 1 Gauge - 24' Long
- Accessories and Parts
- Electric Winch
- Wiring
- Quick Connects
- Wiring Kits
- 1 Gauge Wire
- Bulldog Winch
more information >
Product Page this Question was Asked From
Bulldog Winch Trailer Winch - Wireless Remote - Synthetic Rope - Hawse Fairlead - 12,000 lbs
- Electric Winch
- Car Trailer Winch
- 3-Stage Planetary Gear
- 6.0 HP
- 10001 - 12000 lbs
- 41 - 50 lbs
- Slow - 0 to 4 fpm
- Wireless Remote
- Synthetic Rope
- Bulldog Winch
more information >
Continue Researching
- Shop: Bulldog Winch Standard Series Off-Road Winch - Synthetic Rope - Hawse Fairlead - 12,000 lbs
- Video: Review of Bulldog Winch Electric Winch - Standard Series Off Road Synthetic Rope Winch - BDW56QB
- Video: Review of Bulldog Winch Electric Winch - Standard Series Off Road Synthetic Rope Winch - BDW96QB
- Shop: Bulldog Winch Standard Series Off-Road Winch - Synthetic Rope - Hawse Fairlead - 9,500 lbs
- Shop: Superwinch SX12SR Integrated Off-Road Winch - Synthetic Rope - 12,000 lbs
- Video: Superwinch SX12SR Integrated Off-Road Winch Review
- Shop: Replacement Bulldog Winch Quick-Connect Set w/ Dust Cover - 350-amp x 1/0 AWG
- Video: Bulldog Winch Electric Winch BDW20133 Review
- Shop: Bulldog Winch Quick-Connect Set w/Dust Cover - 175 A - 2 ga
- Shop: Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
- Video: Softride Locking Anti-Rattle Threaded Hitch Pin Review
- Shop: Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches
- Q&A: Where Are Superwinch Winches Made
- Q&A: Will the Bulldog Winch Hitch Mount with Handles Work With a Warn Electric Winch M12
- Q&A: How Thick is the Mounting Plate on the Removeable Mounting Plate.
- Search Results: truck winch
- Search Results: winch mounting tray
- Search Results: winchs
- Video: Bulldog Rear Wiring Kit Installation - 2007 Ford F-250
- Video: Bulldog Winch Electric Winch BDW20011 Review
- Q&A: Why are Some Ball Mounts Longer Than Others?
- Shop: Trailer Wiring
- Q&A: Can The ComeUp Seal Slim be Mounted Feet Down
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: quick disconnect for winch
- Search Results: quick connect winch plug
- Search Results: super winch
- Search Results: 4 wire flat mounting bracket
- Shop: Brake Controller
- Shop: Van Cargo Mat