Bulldog Trailer Jack - A-Frame Jack - BD155157 Review Video

I have a recommendation for you as the Ultimate Trailer Jack #322-RDJ-2K you found is our best solution for moving the jack out of the way for a tail gate. Instead it is much easier to switch to a ball mount with a longer shank like the Brophy #BH20.…

This is a great question! Although we do list the ball hole diameter in the specs for each ball mount, there is an easier way to make sure a ball mount has the hole size you need. Any ball mount rated for Class IV hitches will have a 1-1/4" ball…

The Bulldog Round, A-Frame Jack w/ External Gearbox #BD155157 is one of the better options. This jack will measures 13 inches from the bracket to the top of the jack. It offers 13 inches of lift and is rated for 2,000 pounds. Another option is the…

Yes you do need an install harness to install the Curt Venturer Next part #C74VV in your 2007 Ford F-250 with the part #C51372 being the correct harness.

The Ultimate Trailer Jack part #322-RDJ-2K is the lowest profile trailer jack and would work great for you. Since the bracket is adjustable you can set the height of the jack at a very low height as needed.

The a-frame trailer jacks all use a standard mounting pattern and center hole size for the most part so although I am not quite sure what you are measuring I can confirm we have options, the Ultimate Trailer Jack part #322-RDJ-2K is a good one…

The side mount bolt on ARK Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D has a similar height adjustment to the Ultimate Trailer Jack #322-RDJ-2K. The ARK jack does have a dual wheel and 1,650lb capacity versus the plate and 2,000lb capacity of the…

I do have an option for you but I don't have any way to reduce the ground clearance of your existing a-frame jack . That said, what you can do to fix this issue is replace your existing jack with the Ultimate Trailer Jack part #322-RDJ-2K. The…

I went to our warehouse and pulled one of the Pro Series Trailer Jack part #PSRV20000103. I took some measurements and have attached a photo of the jack with the measurements noted. From the end of the handle to the outer tube on the jack it measures…

I recommend checking out the CE Smith Offset Spare Trailer Tire Carrier #CE27310G for your application because it fits 1" to 3-1/2" wide x up to 4" tall and is compatible with 4-lug and 5-lug bolt patterns, all of which should match…

Your 2006 Nash 22h travel trailer weighs 4,087 pounds and is 23 feet based on my research. It will have a tongue weight of 408-614 pounds. Take into consideration that the 4,087 pounds is the dry weight of your Nash travel trailer. The Pro Series…

The shortest A-Frame trailer jack measured from the top of the mounting flange to the top of the jack is the Bulldog Round, A-Frame Jack w/ External Gearbox - Sidewind - 13" Lift - 2,000 lbs #BD155157. The crank on this jack is below the top of…