Pro Series Round A-Frame Jack Review PSEA20000340 Video

If you're wanting to replace your ShurFlo 2088-403-444 then the Flow Max RV Fresh Water Pump #LC689052 would be a great replacement. It has a 3.0 GPM and a rating of 50 PSI, which will give you a slightly better performance than your SHURflo…

For replacing your Shurflo 2088-422-444 water pump on your camper the water pump part #LC689052 a similar output and psi rating so it would do an excellent job.

To allow the post of the Ultimate Trailer Jack #322-RDJ-2K to slide up and down, loosen the 3 mounting bolts used to attach to your A-Frame. Check to see if this allows the jack post to move. If it does, you'll want to tighten the bolts by hand…

The Camco garden hose shut-off valve #CAM20073 is designed for non-potable use. I recommend the brass version, #CAM20123, which is NSF/ANSI 61 certified. This is the certification for potable water piping (drinking water). I have linked videos on…

The etrailer and Pro Series A frame jacks will use 3/8 inch bolts, which is the standard size for A frame jacks and couplers. For install details and some product demonstration videos, click the provided links.

If you have a standard 3,500 lb axle and the spindle is about an inch in diameter then the correct inner and outer bearings for you are #L44643 which have a 1" inner diameter exactly. This can be found in the kit #BK1-100. If your spindle is…

To mount the Curt Round A-Frame Trailer Jack #C28200 to your trailer you will use 3/8" bolts, which is standard for A-frame jacks and couplers. The length will really depend on your specific trailer frame size, which I wasn't able to track…

I would just run up to a hardware store and grab a couple bolts with a matching nut and lock washer and secure the plate with that. You will want to use bolts with a diameter of 5/16 of an inch or smaller as that is the diameter of the mounting…

Having 2 wheels will provide more surface area/contact with the ground. This could actually make it more difficult to maneuver compared to a single wheel. But two wheels are better than one when not on pavement. A single wheel tends to dig into dirt…

The Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem axle…

To install the Curt hitch part #13571 the two bolt sizes needed are M12-1.25x40 and M10-1.25x35 which are included. If you need new bolts you can order them from us as part #RHK.

The wheel you described was for an Atwood jack and the replacement is no longer available. With this odd size jack, we don't have any compatible replacement, so I recommend replacing your jack. If you have an A-frame trailer then I recommend the…