Bulldog Trailer Jack - A-Frame Jack - BD155033 Review Video

Good news, I can help you find an A-frame jack that has a lower retracted height than 8 inches. One of the lowest retracted height A frame jacks I was able to find is our part #TJA-2001-B. This jack has a retracted height of 5-1/8 inches. I was also…

I went into our warehouse and measured the inner tubing diameter of the Bulldog Trailer Jack #BD155033 and found that it was 2 inches. Check out the picture I attached to see this measurement.

The Bulldog #BD155033 has bottom of mounting bracket to bottom of inner tube dimension of 5-13/16 inches when the jack is fully retracted. Its 2000 lb lift capacity is more than enough to handle the tongue weight of your trailer.

The Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 16 #RRQMFK11-4 are 30 x 25 x 5 mm; they are zinc and are an M6 thread. There isn't an option for channel nuts we have available that have an M8 thread.

The distance from the bottom of the mounting flange to the bottom of the outer tube on the Bulldog Round, A-Frame Jack part #BD155033 is 3-1/2". The mounting flange is 3/16" thick. I have attached a photo of these measurements for you as…

We do carry trailer tongue jacks including products from Dutton Lainson. We offer the 1000-lb-rated side-wind tongue jack #DL22530 which comes without a wheel or foot and that can be installed either by welding or by bolting it to your trailer…

If you are looking to maximize the capacity of the etrailer.com 5,000-pound Jack #TJA-5000S-B, you are not limited to the 2,000-pound drop legs. With that said, you will want to check out the etrailer.com #JF-1005H-Z drop leg. This is rated up to…

Yes, the equalizer that is included with the Suspension Kit #e99ZR will come with nylon bushings installed. I prefer using bronze bushings with wet bolts myself as they will allow for smoother and quieter operation. The Dexter E-Z Flex Suspension Kit…

The JR Products Automatic Changeover 2-Stage Propane Regulator #37207-30395 should be set to give you 11" WC straight from the factory. The pressure will still be the same so there won't be an issue with the new regulator having a higher BTU…

I've attached the dimension pictures you requested for the #37220BL. Let me know if you would like any other dimensions and I'll get them added in.

Typically the running light circuit will be noticeably dimmer than the brake/turn signal circuit, so what you described could be normal depending on how dim the lights are. Without seeing how dim the lights are it's hard to say for certain. If…

I'd be happy to help your find the replacement bearings for your 1995 Palomino Pop-up, but we do not have anyway to look up this information so you'll have to get a little dirty. The easiest way is to remove one hub from your trailer and use…