Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 5,000 lbs

Video Transcript for Bulldog Trailer Jack - A-Frame Jack - BD175000 Review

Today we're going to be taking a look at part number B-D-1-7-5-0-0-0. This is the Bulldog A-frame jack. The jack is a dependable jack, that's recognized as industry standard for agricultural and commercial applications. It's ASABE compliant. It's going to feature a static capacity of 7,000 pounds, with a lift capacity of 5,000 pounds. It's going to feature precision fitted parts. These are going to provide exceptional stability and reliability.

Here at the mounting location, this can be welded or bolted to mount to any standard a-frame coupler. The distance that we have between these mount holes, center on center, they are elongated, so they're going to fit your standard 3 mount hold pattern on your a-frame coupler. The distance that we have between those, center on center, is going to be 3 and 1/8 on an inch. That's going to be between each mounting hole. Your mounting hardware is not included. You could use your existing mounting hardware, or you need to pick some up, but the hardware is not included with the jack. Again, it can be welded or bolted to mount to any standard a-frame coupler.

It's going to feature a top wind handle. It's got a nice, smooth, ergonomic design for easy cranking. It's also going to feature an easy grip knob, that way it's going to ensure secure grip whenever you're operating the jack. The handle can be rotated to a stowed position, that way it's out of the way when it's not being used. The jack is going to be made from a steel construction. The outer tube is going to feature a gray paint finish.

Inner tube is going to feature a clear zinc coating. Real quick, I just want to give you the diameter measurement of the inner tube. That's going to give us a measurement of 2 inches. That means that outer tube is going to have a diameter of 2 and 1/4 of an inch. The footplate, or caster assembly for this jack is sold separately. It can be found right here at etrailer.com. With it in the fully retracted position, it's going to give us a bracket height measurement.

Measuring from the ground to the bracket, it's going to measure 12 and 1/4 of an inch. This jack provides 15 inches of lift, or 15 inches of travel. With it in the fully extended position, this measurement is going to increase to 27 and 1/4 of an inch. The distance that we have from the top of the bracket to the top of the jack, I am including up to this point right here. 13 and 3/4 of an inch. The top of that handle is going to sit an extra inch above, so that'd be 14 and 3/4 of an inch from the top of the bracket. Again, it's got a nice, smooth operating design. 15 inches of travel. Very easy to use. That's going to do it for today's look at part number B-D-1-7-5-0-0-0.