Review of Trailer Valet Trailer Jack - A-Frame Jack - TV54FR Video

Thank you for all of that info! I reached out to my contact at Roadmaster who looked at your serial number and said your tow bar is old enough that if something needs to be replaced then the entire tow bar will need to be replaced. To replace the tow…

If the serial number on your Sterling tow bar is 2433 then replacement arm #RM910660 will not work because it is designed for models with serial numbers between 11841 and 27824. But if the number you have given is missing a digit then the arm will…

I reached out to my contact at Roadmaster regarding your older Sterling Tow Bar and he said for the complete repair kit you will need part #RM-910003-30. For the inner arm bushing kit, which includes the needed washers, you will need part…

Yes you can replace one of the arms of your Roadmaster Sterling Tow Bar part #RM-576. To pick out the correct inner arm you will first need to check the serial number on the tow bar. If the number is lower than 27824 then you have the older style…

It sounds like your Roadmaster Sterling Tow Bar part #RM-576 needs to be taken apart and cleaned thoroughly. I spoke to my contact at Roadmaster and he said that most likely there is a pretty large accumulation of carbon, dirt and other road grime in…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The mounting bracket for the #TV34FR is actually identical to the bracket on the #TV64FR that you were looking at. The holes are 1" apart on center vertically, and 5-1/2" apart horizontally. I have attached a picture for your reference.

Yes, the Curt Anti-Rattle Kit for Hollow Shank #C69HR will hold up when pulling your equipment trailer. This will only work on ball mounts for a 2" receiver with a hollow shank. I feel the Blue Ox Hitch Receiver Immobilizer II #BX88224 is the…

The Trailer Valet JXC Trailer Jack #TV54FR is a great choice for your car trailer. This jack is rated for a lift capacity of 2,000lbs which is going to be more than enough for your tongue weight. The cordless drill feature is a great thing to have as…

The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option #TV54FR had just switched to using the round mounting plate over the triangular mounting plate. We have updated our pictures to match the new product but there are a couple…

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

It is an easy replacement for you based on the picture you sent. The opening for most A-frame jacks require an outer diameter of 2-1/4 inches. I recommend you use a round jack like the Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel -…