B and W Hitch Ball - Pintle Hitch Ball - BWTS10051 Review Video

The TruRyde #GS-2250DL cross references to the National 442109 grease seal. The #GS-2250DL has an inside diameter of 2.250 and an outside diameter of 3.376 inches, and is a compatible replacement for your National grease seal.

It will depend on which pintle hitch you have. Some like the Curt #C45908 have removable trailer balls, some do not. If the trailer ball has a nut on the underside of the pintle, the ball should be removable. It it does not, the ball isn't…

The B&W ball mount #BWBMHD30012 requires a ball with a 1-1/4 inch diameter shank. Ball #BWTS10051 does indeed have a 1-1/4 inch shank so it can be inserted in the ball mount. However it was designed as a replacement for a pintle/ball combo hitch…

The size wrench/socket for the nut of the B and W Pintle Ball #BWTS10051 would be a 1-7/8 inch size.

I went down to our warehouse and measured the Replacement Hitch Ball for Curt Pintle Hook Combo #C48820. The height of the ball inside the pintle is 2-1/2 inches (see picture). The overall height of the hitch ball is 5 inches.

The Draw-Tite Ball Mount for 2 inch Hitches #40332 will work for your class 5, 2 inch hitch #DT52MR. The ball mount has a solid, 1-piece forged steel construction and has a black powder coat finish that covers a the e-coat base that provides a…

You can get a 2 inch ball for the B&W Tow & Stow Pintle Hitch, part #BWTS10056 as part #BWTS10051. This is actually a direct replacement for the 2 inch standard version of your hitch, so your shank diameter and lengths will match up very…

I do have options for you but they do not make an airbag kit for your 2015 Ford Expedition. The only suspension enhancement option we have for you is the Coil SumoSprings Custom Helper Springs part #CSS-1168R which are only a fit for the 4x4 models.…

When it comes to the recommend torque specs for the four bolts on The Curt Pintle Hook with 2-5/16 inch Hitch Ball #C48200 per Curt you will need to tighten all the bolts to 90 ft. lbs. The pintle hook has a bolt-on installation to Pintle Hook…

I went ahead and checked the instructions for the Swagman Current Bike Rack for 2 Electric Bikes #S64678 and discovered that the short wheel holders are for the rear wheels and should be placed on opposite from each other. I have attached an image…