How To Install The CE Smith Roller Bunks for Boat Trailers # CE27710
Question:
I have a sea ray 1850 sport. The trailer has a 9foot carpeted bunk. How would I go about using the rollers bunk/bunks my trailer has 2 side to side braces to attach my present bunks.
asked by: Joseph C
Expert Reply:
If you have adjustable brackets for the bunk boards then you could lower them down and mount the CE Smith Roller Bunks for Boat Trailers # CE27710 directly to them. If you don't have adjustable brackets then you would need to remove the bunk boards and install new brackets like the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks # CE10003G-4. These brackets can be attached to the frame of the trailer with U-bolts like the CE Smith U-Bolts # CE15283GA-4. You'll want to measure the height of the frame first to ensure these are the correct size for your trailer.
If you replace the brackets you'll want to note measure the height of the current boards before removing them so you can install the rollers at the correct height for your boat without having to guess and adjust them multiple times. I've attached a video below where we'll walk you through the installation process.
(click to enlarge)
Products Referenced in This Question
CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 10 Inch Tall
- 2 Inch Tall
- 1-3/4 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 1-1/4 Inch Long
- CE Smith
more information >
CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 5"
- Shop: Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson
- Shop: Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by Dutton-Lainson
- Shop: CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Q&A: Replacement Roller Assembly for Deep-V Style Boat Trailer
- Q&A: Can 5' Roller Bunks Be Used in Place of 7' Bunk Boards for a 15' Sail Fish Center Console Boat
- Shop: BOLT brand vehicle and hitch locks
- Shop: Trailer Hitch
- Video: BOLT Trailer Hitch Receiver Lock Review
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Search Results: 25580
- Q&A: Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Search Results: 68149
- Q&A: Picking Out Replacement Axle for Snowbear 550LHD Trailer
- Shop: Brake Controller
- Search Results: dust cap
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Does BOLT Trailer Hitch Receiver Lock For GM Center Cut Key Fit 2021 Chevy Silverado
- Video: CE Smith Bolster and Swivel Bracket Assemblies Review
on Boat Trailer Parts
