Can 5' Roller Bunks Be Used in Place of 7' Bunk Boards for a 15' Sail Fish Center Console Boat
Question:
Hey guys, I have a 1995 Sail Fish 15’ center console boat. The boat has 2-7’ bunks…I’m looking to see if a 5’ roller bunk would work in place of the 7’ bunks? I have attached some pics. The brackets holding the current 7’ bunk is approximately 50” apart. From what I can see it would be able to bolt on a 5’ roller bunk…. I just bought the boat, unfortunately the place that I need to launch it is very shallow. Looking for your asst. Thanks
asked by: Jay G
Helpful Expert Reply:
We have had this come up before and the manufacturer stated that the CE Smith Roller Bunks for Boat Trailers # CE27710 would work for a 15' boat in place of your 7' bunk boards as long as the cross members are 56 inches or less. Which your 50" spread is.
You can mount them to the existing bunk boards on your trailer or you can use the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks # CE10003G-4.
Products Referenced in This Question
CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 10 Inch Tall
- 2 Inch Tall
- 1-3/4 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 1-1/4 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Shop: CE Smith Bolster and Swivel Bracket Assembly for Roller Bunks - Galvanized Steel - Qty 1
- Shop: CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Shop: CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21754 Review
- Video: CE Smith Bolster and Swivel Bracket Assemblies Review
- Shop: Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson
- Q&A: How Far Should Rollers Install Behind Rear of Trailer Frame
- Video: Review of Dutton-Lainson - Trailer Winch - DL24059
- Q&A: Roller Bunk Recommendation for a Boat Trailer with Wood Bunks
- Search Results: winch stand
- Search Results: trailer tongue extension
- Q&A: Adding Bunks to 20 Foot Boat Trailer with Deep V Hull
- Q&A: Recommended Roller Bunks For Commercial Crab Boat 5,000-6,000 lbs
- Q&A: Length from Hitch Pin Hole To Larger Welded Shank on Curt Extender # C45796
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Search Results: 26 inch leaf spring
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: trailer bunk brackets
- Q&A: Installation of Slipper Spring with Open Eye End
- Search Results: ce15283ga
- Video: Redline Trailer Suspension SP01-120 Review
- Video: Review of Universal Group Trailer Leaf Spring Suspension - Springs - SP-230275
- Video: Review of etrailer 2 Leaf Slipper Spring - e36SR
- Search Results: 26 inch leaf springs
- Search Results: roller brackets
- Shop: Trailer Hitch
- Shop: Trailer Wiring