Trailer Hitch Receiver For a 2016 Honda Fit For Carrying a Dirt Bike

Question

Question:

Hello. I am trying to figure out a safe way to transport a dirtbike that is around 185 lbs with a hitch mount connected to my 2016 Honda Fit. I found this part and then through further searching on the site I found the etrailer Motorcycle Carrier w/ Ramp for 2inch Hitch - 76inch Long - Steel - 500 lbs - e98873. Is it possible to connect that carrier with this hitch on my honda and safely transport a bike that is 185lbs? I know the weight cannot surpass 300, and I am trying to figure out the right way to do this safely. If the carrier I found is not right, is there a lighter carrier that will work with this custom Honda hitch? Thank you.

asked by: Jeanne

0

Expert Reply:

With the etrailer Motorcycle Carrier # e98873 weighing 58lbs and your dirt bike at 185lbs you are below the 300lbs of maximum tongue weight the EcoHitch Hidden Trailer Hitch Receiver # 306-X7273 is capable of supporting. You will need to verify if Honda has a specific tongue weight rating for your 2016 Fit and ensure you do not exceed the maximum weight capacity for your Fit with any additional passengers and gear you may also have.

We do have the Ultra-Fab Dirt Bike Carrier # UF48-979033 that is 5lbs lighter to help save you a bit of weight.

The Curt T-Connector Vehicle Wiring Harness # C56395 will allow you to add Auxiliary Lights # C53201. The lights will likely be needed as the tail lights on your fit will be blocked by the dirt bike.

expert reply by: Bud M

0

Answer 1

The EcoHitch #306-X7273 is a fit for your Honda Fit, and has a tongue weight capacity of 300 lbs, which means that the hitch would easily accommodate the weight of the bike rack plus all the bikes loaded upon it. The Swagman Quad 2+2 is a great…

view full answer...

Answer 2

In order to use a bike rack with 2" shank on a 2015 Honda Fit such as the Thule T2 Classic you will need to use the EcoHitch Hidden Trailer Hitch Receiver part #306-X7273 which is the only available 2" hitch option. The EcoHitch has a super…

view full answer...

Answer 3

I can assure you that all three of the hitches recommended for your 2015 Honda Fit do actually fit. This includes the Curt Class I Hitch part #C11406, the Draw Tite Class I Hitch part #24920 and the EcoHitch part #306-X7273. Both of the Class I…

view full answer...

Answer 4

I have two different hitches I'd recommend for towing a small kayak trailer with your 2015 Honda Fit. For a standard Class I hitch with a 1-1/4 inch receiver opening, I'd recommend the #24920 Draw-Tite hitch you'd looked at. This is a…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...