Compatibility of Weight Distribution System with Gen-Y Torsion Ball Mount

Question

Question:

Hello, I am towing an enclosed 24’ car trailer bumper pull with my Titan xd Cummins. I have a Geny Torsion hitch and I am wanting a weight distribution system and stability bars. I think the Curt MV system would work but most look like they would bypass my hitch for theirs. Any recommendations on a system that works well with the Torsion Geny? Thank you

asked by: Jacob C

0

Expert Reply:

A Gen-Y Torsion ball mount like # 325-GH-1024 can be used with a Curt MV weight distribution system. You will put the weight distribution system shank in one of the stacked receivers and that will give you a smooth ride and still give you the stability.

The Curt MV Weight Distribution System # C17052, # C17063, and # C17422 are the options we have for the specific tongue weight. You want your trailer tongue weight to be within the middle of the range for the appropriate system.

expert reply by: Jason S

0

Answer 1

Yes, the Strait-Line Weight Distribution (No Shank) part #RP66074 will be directly compatible with the Gen-Y Torsion Weight Distribution Shank part #GY54FR.

view full answer...

Answer 2

One option that might help is the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers #325-GH-1024. This is a cushioned ball mount setup that basically gives the ball mount connection of the trailer suspension. This uses torsion springs to vertically…

view full answer...

Answer 3

The Gen-Y Torsion 2-Ball Mount part #325-GH-1024 is a great heavy duty ball mount option for towing. If you have a weight distribution system then there is another version of this same shank that is designed to accept a weight distribution head, the…

view full answer...

Answer 4

Blue Ox SwayPro Weight Distribution system #BXW2003 is compatible with the following Gen-Y Torsion Weight Distribution Shanks: #325-GH-1302 (video linked) #325-GH-1102 #325-GH-1202 The Gen-Y shanks accept weight distribution heads with holes spaced…

view full answer...

Answer 5

Hey Cameron, I was finally able to get my hands on the Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch #BLU25XR and found the spacing to be 1-7/8".

view full answer...

Answer 6

The TireMinder i10 TPMS #TM38FR refreshes every 6 seconds. You will get a visual and audible alert when the monitor receives the signal from your tire sensor is either below your pressure or the temperature exceeds the maximum setting.

view full answer...

Answer 7

After reading your question I am assuming you are talking about a hitch with weight distribution. That is the question I am answering. I think the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10,000 lbs, part…

view full answer...

Answer 8

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 9

You could upgrade your axles to a higher capacity, however it isn't really recommended since it can create a rougher ride. Since you've got 3,500 lb axles I'd stick with those and upgrade your suspension with the SumoSprings Trailer…

view full answer...

Answer 10

Yes, a 2014 Honda CR-V AWD can be flat-towed with all four wheels down. In order to do so you'll need a base plate kit, tow bar, safety cables, lighting, and braking system. I have attached my recommendation for each of these components below.…

view full answer...

Answer 11

Thank you for the photos and sorry to hear about your truck! The unique design of the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate #BWTS20066BMP is that angled section that meets with the shank part of the ball mount. On…

view full answer...

Answer 12

With weight distribution systems you can't really make tight turns while backing up. What we recommend is that if you are basically backing up in a straight line you can leave the spring bars on the system. But if you think you will end up…

view full answer...