Review of Gen-Y Hitch Weight Distribution Hitch - GY54FR Video

The picture you submitted shows a weight distribution head that has a 1,000 lb tongue weight and 10k total trailer weight when the spring bars aren't connected.

The Gen-Y Torsion Weight Distribution Shank #325-GH-1202 has plenty of capacity for your 7600-lb travel trailer. This shank is compatible with any brand of weight distribution head assembly and will give you a less jerky ride thanks to its rubber…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount part #C83WR won't work with a weight distribution system due to the design of the adjustable shank but we do have a very similar option that will, the Gen-Y Torsion Weight…

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

I do have an option for you but if the weight distribution system is sway control compatible then there will be a tab on one or either side of the head which you can attach a friction sway control device to such as the Reese Friction Sway Control Kit…

As long as you are using the factory coil springs on your 2013 Toyota FJ Cruiser then the 2-1/2" lift kit you have in the rear will not be a problem. If you have a set of taller/stiffer aftermarket coil springs then you would need to test these…

Adding suspension enhancement like Timbrens will help with sag and increase stability and ride quality. If your 2011 Toyota FJ Cruiser is a 4-wheel drive model, for the front you can use #TTOFTAC4A that you have referenced. There is no option for the…

The Curt 45951 Rebellion Shock absorbing ball mount which we offer as part #C83WR would certainly reduce much of the shock and vibration that's experienced when towing a trailer which would absolutely make towing a more pleasant experience. Much…

It sounds like you are trying to get the best hitch mounted suspension for your vehicle to not transfer the shock. The Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 2" Drop, 3-1/2" Rise - 7K #325-GH-12001 will absolutely…

It is perfectly safe to use a reducer sleeve like the Curt #C45405 to fit an accessory with a 2" shank into your 2-1/2" trailer hitch receiver. We do have options for you to use a ball mount with a 2-1/2" shank for when you want to tow…

I've linked our selection of weight distribution shanks for 2-1/2 inch hitch receivers. Most shanks are universal and will work with other brands of systems. As long as the holes are 3/4 inch in diameter and are spaced 1-1/4 inches apart…

Yes the Equal-i-zer weight distribution shank part #EQ90-02-4900 is essentially the exact same shank as the 90-02-4325 you mentioned with exact same dimensions and capacities.