Reese Strait-Line Weight Distribution System Installation - 2013 Ram 1500 Video

If your loaded tongue weight is 1,350 lbs then the Reese WD System part #RP66131 that you referenced would be correct for you as it has a tongue range of 800 lbs - 1,500 lbs and yours falls in that range. Be sure that you are considering the weight…

The SnapPad Base for RV Plastic Leveling Blocks or Leveling Buckets #SN55FR would just snap onto the bottom portion of your Andersen Jack Block just as you would install SnapPads on your leveling jacks. These SnapPads measure 14" x…

With a predicted loaded trailer weight of around 7,600 pounds (which would give you a loaded tongue weight like you mentioned of around 912 pounds) I highly recommend the higher-rated Equal-i-zer Weight Distribution System #EQ37120ET. This system…

I would be happy to help you determine the correct weight distribution system for towing your 2020 Rockwood Ultra Lite 2608BS. The hitch weight number of 796lbs you mentioned is with an unloaded trailer, which means the Strait-Line Weight…

According to the directions, you will not want any less than 4 chain links. With regards to your issue, the first thing that comes to mind is you may not have the properly rated weight distribution system; the correct system is going to be one in…

When using a chain hanger weight distribution system like the Reese Strait-Line #RP66072 that you referenced, you ideally want to have 5 links between the hook and U-bolt. I recommend first trying to adjust the ball mount angle a bit rearward to see…

The complete installation instructions for the Reese Strait-Line Weight Distribution Hitch #RP66074 are attached for your reference. While these do provide complete adjustment instructions for the hitch head angle the chart you referred to (from page…

Yes, it is my experience that they dual-cam sway control works much better than the Blue Ox systems. I recently have been riding in trucks towing trailers, one with the Blue Ox and one with a Reese system with the dual-cam sway control. The Blue Ox…

The shank you referenced, part #RP54977 would be a good choice for you, as long as it provides sufficient drop. We have an FAQ article that shows how to determine the rise or drop needed in a ball mount. The procedure is the same for a weight…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

Yes, the Strait-Line Weight Distribution (No Shank) part #RP66074 will be directly compatible with the Gen-Y Torsion Weight Distribution Shank part #GY54FR.

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…