Gen-Y Stacked Receivers Torsion 2-Ball Mount Review Video

The Gen-Y Torsion 2-Ball Mount #325-GH-1824 that you referenced does now come with set screws on the sides of the square openings to allow the movement of the ball and retainer to be reduced. I attached a picture of them for you to check out. The…

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

Yes of course. The Replacement Lippert Components Correct Track Weld-On Axle Hanger part #LC303918 you mentioned is 5" tall x 3-1/2" wide x 3-1/4" deep and the two mounting holes on the top are 1-3/4" apart on center as shown in…

I will start by saying the ARK Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU will fit frames that are 2" to 6" tall. The bolt hole measurements vary and I included a diagram with everything listed, but the overall dimensions of…

The price for the Gen-Y Adjustable Ball Mount with 6 inch drop for the three inch hitch size #325-GH-1723 is available at the link below.

There is definitely a way to tow a 5th wheel trailer with your 2021 Ram that is equipped with the RamBox, but it's going to require some new components both on the trailer and your truck. The issue with the Ram Boxes is that they make the bed…

Between the Shocker Hitch and Gen-Y Torsion ball mount, I recommend the Gen-Y. Its rubber torsion arms are going to absorb road shock naturally due to its design, while the Shocker Hitch requires constant maintenance that isn't needed with the…

Yes, we do have a cushioned Gen-Y adjustable ball mount that fits a 3 inch hitch. For that you'd want the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers #325-GH-1824. This has a 21k capacity, can do a drop of up to 6 inches and fits the 3 inch…

We have both options available for you the Curt 2" Hitch Ball part #C69FR and the Curt 2-5/16" Hitch Ball part #C49FR are both compatible. They offer the 1-1/4" shank required for the Curt Heavy Duty Forged Ball Mount for 3"…

So there is a B&W Tow & Stow that fits a 3 inch hitch and has a capacity up to 21,000 lbs, but not with a pintle hook. I checked directly with B&W to verify this for you. The 21k capacity is for the included 2-5/16" hitch ball, and…

We have the Draw Tite hitch lock part #63260 that has a 4 inch usable span and a 5/8 inch diameter like what would be needed for a 3 inch trailer hitch. This also stainless steel which means it won't corrode and is very strong.