Does the Curt Class I Hitch for 2013 Ford Focus Have Weld Stop Built into the Hitch Opening

Question

Question:

Hello, I am just wondering if there is a backstop on the Curt 11158 receiver? If there is, how many inches from the mounting hole is it? I have a 2013 Ford Focus Hatchback. Thanks!

asked by: Kristin

1

Helpful Expert Reply:

Actually the Curt Class I hitches do not have the weld stop in the hitch tubes to prevent Class II only accessories from being used. It's not a well-known feature we advertise as the absence of it does not mean you can use a Class II only accessory.

If you are wanting to use a Class II only accessory in this hitch I can't recommend it, but I can say that the hitch does not have the weld stop.

expert reply by: Jameson C

1

Answer 1

The hitch I recommend for your 2018 Ford Focus is the Curt part #C11158 which fits the sedan and hatchback models. Check out the video of this hitch to see how it works.

view full answer...

Answer 2

All of the trailer hitches for the 2009 Ford Focus, see link, are Class I trailer hitches with 1-1/4 inch receivers. Even though there is no 2 inch hitch option you could use adapter #HTAD. However, doing so will reduce the tongue weight capacity of…

view full answer...

Answer 3

For your 2012 Ford Focus Sedan, I recommend the Curt Class I Hitch #C11158. I have attached a link to all the bike racks that will work with the Curt hitch's 1-1/4 in receiver opening. The link will show both hanging and platform racks. If you…

view full answer...

Answer 4

I have a great solution for you for a bike rack with a ramp. Unfortunately, Saris does not make a ramp for the Saris MTY Bike Rack SA4031. We also do not have a bike rack that has a ramp for a single bike. With that being said, we do have a 2-bike…

view full answer...

Answer 5

The Thule Passage 2-bike trunk-mount rack #TH910XT is a confirmed fit on both the 2014 Ford Focus sedan and hatchback ST models with factory spoiler. My contact at Thule confirmed that there are no fit issues on your car, but it is true that there…

view full answer...

Answer 6

All Class I hitches offered for your 2014 Ford Focus SE Hatchback are a light-duty type that offer the same 200-lb tongue weight capacity, but as you note there are some differences between them that may help guide your choice for your cargo basket…

view full answer...

Answer 7

Structurally, a class II trailer hitch is designed to hold a bit more weight than a class I. This is because the materials that compose a class II hitch are stronger. All class I and class II hitches have the same 1-1/4 inch receiver opening which…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...