Trailer Hitch Recommendation for 2018 Ford Focus

Question

Question:

What hitch should I get for my 2018 Ford Focus?

asked by: Kirk

0

Expert Reply:

The hitch I recommend for your 2018 Ford Focus is the Curt part # C11158 which fits the sedan and hatchback models. Check out the video of this hitch to see how it works.

expert reply by: Jameson C

0

Answer 1

Actually the Curt Class I hitches do not have the weld stop in the hitch tubes to prevent Class II only accessories from being used. It's not a well-known feature we advertise as the absence of it does not mean you can use a Class II only…

view full answer...

Answer 2

All of the trailer hitches for the 2009 Ford Focus, see link, are Class I trailer hitches with 1-1/4 inch receivers. Even though there is no 2 inch hitch option you could use adapter #HTAD. However, doing so will reduce the tongue weight capacity of…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

For starters, what engine and transmission do you have in your 2016 Ford Focus? If you have the 1.0L I3 engine then the vehicle must be towed on a dolly with the front two wheels off of the ground. If you have the 2.0L I4 engine then the vehicle can…

view full answer...

Answer 9

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 10

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 11

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 12

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...