Curt Trailer Hitch Installation - 2013 Ford Focus Video

The Curt trailer hitch for your 2018 Ford Focus is the part #C11158 is rated at a 5/10 difficulty level and should take approximately 30 minutes to install. It does require drilling to install. I attached an install video for this for you to check…

Yes, the Curt Hitch part #C11158 that you referenced has been confirmed as a fit for your 2015 Ford Focus so I would recommend it for you. I attached an install video for this hitch for you to check out as well.

Since the Curt Hitch part #C11431 will mount underneath the center exhaust on your 2014 Ford Focus ST Hatch the ground clearance will be reduced. Since we haven't had that chance to install this hitch on a vehicle like yours we don't have an…

I have attached the installation instructions for the Curt Trailer Hitch Receiver, #C11158. They will include the torque specifications for you. Since manufacturers can change these ratings from time to time, using the link to the instructions will…

We had a customer with a 2017 Honda CR-V Touring just like yours who told us that the Curt hitch part #C13397 did not interfere with their hands free liftgate at all. You would not need to move any sensors.

Honda offers a Power Liftgate Sensor Relocation Bracket as part #08U59-TLA-100A for your 2019 Honda CR-V for when you install a hitch like the Draw Tite part #76128 so that the hands free lift gate will still function properly. That said, we've…

Curt recommends the stabilizer strap with non-supported loads like bike racks to help support the hitch when going over bumps to prevent some of the vertical shock from being transferred to the hitch. Curt does this as a precaution, it's not that…

You will need the Yakima Replacement Spine Assembly for 2 inch HoldUp Bike Racks, item #8890277, to replace the shank on your 1-1/4 inch HoldUp rack and make it work correctly in your 2 inch hitch. As an alternative you could use the Hitch Reducer 2…

The Thule T2 Pro 2 Bike Platform Rack referenced in your question is a great platform rack designed for Class I and Class II trailer hitch receivers. Since the release of the T2 Pro 2 Bike Platform Rack, Thule has made some improvements and released…

To replace the hubs on your trailer, I will need you to pull one of your hubs and look for the inner and outer bearing. On the face of each of these bearings, there is a number. That number will help me get you the correct hubs for your trailer. If…

There are generally just a couple of caps available but unfortunately the tire size does not help with finding the right one. These are matched up by the bore size or the inner diameter of the hub where these caps are knocked in. I have linked the…

The Curt Trailer Hitch Receiver #C11431 is designed for and confirmed to fit the Hatchback ST. There will be drilling required for installation, exhaust must be temporarily lowered for installation and access holes may need to be enlarged by…