etrailer Class III Trailer Hitch Installation - 2021 Subaru Crosstrek Video

The etrailer Hitch #e98912 comes with four 1/2-13 x 1 1/2 carriage bolts.

We sure do! We have had the chance to install the etrailer Trailer Hitch Receiver #e98912 you were looking at on a 2021 Subaru Crosstrek as you can see in the included pictures. I really like how this hitch looks once installed due to the matte black…

Yes, it does. We have had a customer install the etrailer Hitch item #e98912 on their 2024 Subaru Crosstrek with no issues. This hitch is custom fit and bolts to your Crosstrek with included hardware. It does not fit the Hybrid models. Besides being…

You are correct, hitches for the 2022 Subaru Crosstrek like the etrailer Trailer Hitch Receiver #e98912 have a max tongue weight over 500 lbs, or in this case 525 lbs. This is simply the tongue weight capacity of the hitch itself. The capacity is…

You could use a step drill bit in the size of 7/8 inch to 1-1/8 inch which appears to be the size our installer used when installing the etrailer hitch part #e98912 in the install video link I attached.

Yes, there is a trailer hitch that fits your 2024 Honda HR-V. The Curt Trailer Hitch Receiver #C68DR will fit and provide you with a 1-1/4" hitch receiver. I am guessing that by "smaller hitch", the 1-1/4" hitch is what you meant.…

The answer to this question really depends on the frame of your 2021 Subaru Crosstrek; in some cases the factory hasn't created big enough holes to run the installation hardware through, so the existing holes need to be enlarged to get the hitch…

It looks like you are looking for an enclosed cargo carrier to fit your Jeep Wrangler with a rear mounted spare. It's hard to see where you took the measurement from in the picture you attached, but if the distance from your hitch pin hole to the…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

I've attached some photos so you can see how the #e98912 is going to look like after you install it on your 2020 Subaru Crosstrek Limited. These photos were submitted by another Crosstrek Limited owner who confirms it's a perfect fit and as…

The spacers that come with the etrailer hitch that fits your 2022 Subaru Crosstrek are designed to be used as a way to level the hitch as needed. So if using them causes your hitch to not sit level I would recommend removing them.

To add a hitch to your 2024 Ford Bronco Sport, I recommend the etrailer item #e57KR. This hitch is custom fit and bolts to your Bronco Sport with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity…