Installation Instructions for Tekonsha Voyager Brake Controller
Question:
I have a Tekonsha Voyager control and need a copy of the wiring diagram for installation. Thank you in advance for your assistance.
asked by: Stephen T
Helpful Expert Reply:
I have attached a basic brake controller wiring diagram for you. You will want to make sure that you ground the white wire to the negative post on the battery. The black wire will attach to the positive battery post. The red wire will tap into the stoplight switch on your vehicle's brake pedal. The blue wire will run back to the trailer connector. The brake controller will come with the universal 4-wire harness.
I have also linked the installation directions for the Tekonsha Voyager # 39510.
Many times, you will be able to use a direct fit wiring harness to attach your brake controller with your vehicle's wiring harness if your vehicle came with a factory tow package. If you will send me the year, make, and model of your vehicle, I will be happy to see if you are able to use a direct fit wiring harness. With this information I can also provide a specific parts list and instructions for your vehicle.
I have attached two articles with brake controller information for you.
Product Page this Question was Asked From
Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Manual Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- Indicator Lights
- Up to 90 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Article: Most Popular Wheel Bearings
- Article: Brake Controller Installation: Starting from Scratch
- Video: Review of CURT Trailer Brake Controller - Proportional Controller - C24VV
- Shop: Curt TriFlex NEXT Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Shop: Vehicle Tow Bar Brake System
- Shop: Suspension Enhancement
- Shop: Base Plate for Tow Bar
- Q&A: Wiring Configuration for Tekonsha Prodigy P3 Trailer Brake Controller 90195
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 2" Drop - 7K
- Shop: Pintle Hook Mount, 7-1/2" Tall, Long Shank, 12K
- Shop: B&W Pintle Hook Mounting Plate for 2" Hitches - 13" Shank - 14 Hole - 16,000 lbs
- Shop: Buyers Products 2-1/2" Pintle Hook Mount - 2 Position - 12" Shank
- Shop: Demco Hydraulic Brake Actuator - Drum - Black - 8" Adjustable Channel Center - 8,000 lbs
- Shop: Fifth Wheel Hitch
- Video: Best 2016 Ram 2500 Suspension Enhancement Options
- Shop: Vehicle Tow Bar Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Electric Brake Terminal on 7-Way Connector is Showing Constant 12 Volts Under All Conditions
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Search Results: trailer hitch ball mount
- Search Results: tekonsha harness
- Search Results: trailer hitch balls sizes
- Search Results: hitch pin
- Search Results: hitch
- Search Results: tekonsha 3024~p
- Q&A: 7-Way RV Trailer Connector Wiring Diagram