Installing Prodigy P3 Brake Controller on 2011 GMC Sierra
Question:
The Tekonsha P3 controller I bought didnt didnt come with a wiring diagram, so before connecting wires, I wanted to confirm the color codes of the wires coming off the brake controller and what color wires they connect to on the truck. Was hoping to buy controller to truck harness, but no one offers one. I would hope they are all the same across the years on the GMC trucks, and from what I have read, the wiring is tucked under the dash on my truck next to the steering column. Any help would be appreciated.
asked by: Dan C
Helpful Expert Reply:
The wires to install the Prodigy P3 # 90195 are indeed already run and under your dash. I have added a link to an installation video showing exactly how to install this brake controller in a 2011 GMC Sierra like yours. On the Prodigy the blue wire is for the brake wire, the black is for the 12 volt hot lead, the red is for the cold side of the stop light switch and the white is the ground wire. Following the video and the help article I added on installing brake controllers will offer you the precise way to go about installation.
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Q&A: Does Curt True Course Only Work With Curt Brake Controllers
- Article: Trailer Wiring Diagrams
- Video: Curt True Course Trailer Sway Control Review
- Video: Review of CURT Weight Distribution Hitch - Bluetooth Trailer Sway Control Only - C94VV
- Shop: Curt True Course Advanced Bluetooth Trailer Sway Control - 1 to 4 Axles
- Shop: Vehicle Tow Bar Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Trailer Wiring
- Shop: Roadmaster Brite-Lite Wiring Converter
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Wiring Configuration for Tekonsha Prodigy P3 Trailer Brake Controller 90195
- Shop: Tuson Asymmetric Sway Control - 1 to 4 Axles
- Q&A: Can Weight Distribution System be Added to a 17 Casita with a Large Storage Box on the Tongue
- Shop: Suspension Enhancement
- Search Results: 3802346
- Shop: 3-Ball Storage Case for Convert-A-Ball Interchangeable Hitch Balls
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Trailer Hitch
- Q&A: Electric Brake Terminal on 7-Way Connector is Showing Constant 12 Volts Under All Conditions
- Shop: Custer Trailer Connector Adapter - 7-Way Round to 7-Way Blade
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Video: Roadmaster Stop Light Switch Kit Review RM-751200
- Search Results: tekonsha plug~in wiring adapter for electric brake controllers
- Q&A: Hooking a Gooseneck Trailer with RV 7-Way Plug to 1999 International 9100 7-Way Round Plug
- Q&A: 7-way Round to 7-Way flat Adapter Recommendation
- Q&A: 7-Way RV Trailer Connector Wiring Diagram
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Search Results: breakaway battery box
on Trailer Brake Controller
