5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long

See what our Experts say about this etrailer Trailer Leaf Springs

• Spare Leaf Springs, Shackle Kit, and Spring Hangers for a 2019 Grand Design Reflection 303RLS
  Since your 2019 Grand Design Reflection 303RLS has 5,200 lbs Dexter axles you will most likely have 25-1/4" long double eyed leaf springs. You will want to measure to confirm but if this is what your 5th wheel currently has you will want the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long item # e34SR as spares. The MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps item # MR46ZR will work well with these leaf springs but you will again...
  view full answer...
• Dimensions for Spring Hanger Spacing Using the # APTT3 Triple-Axle Hanger Kit on a Boat Trailer
  The spring hanger mounting dimensions for the Triple-Axle Trailer Hanger Kit, item # APTT3, are as follows. From the center of the hole in the front hanger, to the center of the hole in the center front hanger, the distance should be 29-1/2 inches. From the center of the hole in the center front hanger, to the center of the hole in the center rear hanger, the distance should be 34 inches. And from the center of the hole in the center rear hanger, to the center of the hole in the rear hanger,...
  view full answer...
• 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles vs. 5-Leaf For 6,000 lb Axles
  I'm not seeing both a 4-leaf and 5-leaf spring for a 5,000 lb axle, were you possibly referring to the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long # e44SR or 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long # e34SR? If so, rise stiffness and capacity is just what you have to consider (assuming these are the proper length). You said a 6k axle, so if that's the capacity of your trailer, and you plan on hauling that much, go with the higher-rated 6k....
  view full answer...
• Recommendation for Upgrading Double-Eye Springs Suspension to Remedy Trailer Lean
  To replace the 6,000lb leaf springs on your 2014 Grand Design 337, a great option is the Double-Eye 5-Leaf Springs, # e34SR. These are 25-1/4 inches long, so to confirm they will fit your trailer, it is best to try and measure your current, unloaded leaf springs to assure proper replacement length. Typically, the number of leaves on a suspension system will not have an affect on the setup, especially when looking at leaf springs within the same weight capacity. The difference in the amount...
  view full answer...
• Replacement Trailer Leaf Spring Solution for Dexter 072-098-00
  That Dexter number normally cross referenced with a 3,500 lb axle that measures 25-1/4 inch like with our # e57SR. The highest rated spring we have in this length is the # e34SR which is for a 6,000 lb axle.
  view full answer...
• Replacement Leaf Springs For 6,000LB Axles On a 2022 Crossroads Volante 3601LF
  Based on the information I could find on your 2022 CrossRoads Volante 3601LF 5th wheel I see you have 6,000lb axles. They do not list an exact replacement so you will need to measure your current leaf springs to determine the correct length needed. Also remember that leaf springs should be replaced in sets. 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long # e94SR 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long # e34SR 4-Leaf Double-Eye Spring for 6,000-lb...
  view full answer...
• Replacement Leaf Springs For A Trailer With 8-Leaf Leaf Springs
  Hey Cody, The amount of leafs in the spring isn't as big as factor as you'd think. The more leafs the softer the progression will be when the spring is compressing. Less leafs will give you a stiff progression as the spring compresses. When you measured from center to center on your eyelets did you lift the trailer and allow the axle to hang to take the weight of the springs? If not, you'll need to so that you can get an accurate measurement. Once we have that measurement we'll also...
  view full answer...
• Correct Replacement 25-1/2 Long Leaf Springs for Utility Trailer
  Currently, we offer both 25-1/8" and 25-1/4" long leaf springs. That said, leaf springs can flatten over time and you also need to make sure you're measuring unloaded. Therefore, you likely need 25-1/4" which is a standard size. The correct replacement will then be broken down by axle capacity, part # e57SR for 4K part # e34SR for 6K. The axle capacity should be on the axle tag sticker in the center of the beam. In regards to equalizers and wet bolts, the Dexter Heavy-Duty Suspension...
  view full answer...
• Recommended Leaf Springs, Equalizers, and Wet Bolts for 2019 Grand Design Reflections 303RLS
  I have attached for you below all the parts you requested for your 2019 Grand Design Reflections 303RLS. 5-Leaf Double-Eye Spring part # e34SR MORryde Suspension Upgrade Kit for Tandem Axle Trailers part # MR46ZR MORryde Shock Absorbing Suspension Equalizers part # MR27ZR MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles part # MR66ZR I know you said you wanted to use the Dexter EZ Flex but the MORryde CRE300 are much better as they offer more travel which equals better shock...
  view full answer...
• Replacement Landing Gear and Equalizers for a 2008 Keystone Cougar 5th Wheel
  Thanks for the pictures! Based on the weight of your 2008 Keystone Cougar 5th Wheel, you will want the item # LG-1 landing gear set. You are going to want to measure to be sure this is the right size for you. The two things you will want to measure will be the distance of the black outer tube of the jack and the distance between the frame clamps (this measurement can differ depending on where the weld stops are located). You'lll need to measure from the underside of top bracket to top of...
  view full answer...
  
• Do Trailer Leaf Springs with More Leaves Resist Flattening Better
  The amount of leaves won't make a huge difference on whether they will flatten out or not as what really matters is the capacity of the spring relative to the axle and trailer weight. I would go with at least ta 4,400 lb leaf spring or maybe slightly higher. You will also need to measure the current springs you have to determine the correct replacement as well. I attached a link to this page that has all of the options we have. First select the length that best matches and then the capacity...
  view full answer...
• Parts Needed for Adding Electric Brakes to Trailer with Bearings LM67048 25580
  For a new hub/drum that will work great with your current axles you'd want the part # 8-201-5UC3-EZ and then for brake assemblies you'd want the # AKEBRK-7-SA which are self-adjusting. To wire up the brakes you'd need 10 gauge wire like part # 10-1-1 which we sell by the foot. Then leaf springs the part # e34SR would work really well too. Then for a U-bolt kit you'd want the part # APUBR-8. For new shackles I'd need you to get me the length of the ones you have now though. Measured from...
  view full answer...
• Recommended Triple Axle Setup for Tiny Home Trailer
  The best trailer axle option we have for your custom tiny home trailer build is going to be the Dexter Trailer Axle w/ Electric Brakes part # 8327864-EB for 7,000 lbs. This axle is top of the line and comes with everything you need for bolt-on installation. It comes with electric brakes, 8 on 6-1/2" hubs, and zerk fittings on the axle for easy maintenance. The hub face to hub face measurement is 94" so once you have wheels and tires on you will be around 8-1/2' wide. I have attached some...
  view full answer...
• Help Picking Out Replacement Trailer Leaf Spring for Spring that Measures 26 inches Long With Load
  I need two things to help you pick out the correct leaf springs for your trailer. I need to know the axle capacity of your trailer as well as the length from eye to eye without a load on your trailer. With those two pieces of info I can help you pick out the correct springs. A likely candidate for what you need is the part # e54SR which is for the very popular axle capacity of 3,500 lb and is 25-1/8 inches long. This would be about the right length when your spring doesn't have a load...
  view full answer...
  
• Will the etrailer 5-Leaf Double Eye Leaf Springs Fit a 2018 Prime Time Avenger 31DBS
  Anthony, unfortunately we don't have a master list of all the fits and non-fits for the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e34SR but you can easily measure the leaf spring that you're replacing to verify. If your current leaf spring unloaded measures 25 1/4" from center to center between spring eyes and has 1 3/4" wide springs then this will work for you.
  view full answer...
• How to Pick Out Replacement Leaf Springs for a R-Vision Trail Lite Crossover
  You gave me a lot of great information, but the last piece of the puzzle is the axle capacity of your trailer. With that I can tell you what spring would work best. Priority number one for picking out leaf springs is to go with the proper rated spring. I tried looking up your trailer info but could not determine the axle capacities. If you check the plate or plaque up near the coupler of your trailer you will see the axle ratings listed there. You will want to then check out the link I...
  view full answer...
• Determining Replacement Leaf Springs For a 5TH Wheel Camper Trailer With 12,000LB GVWR
  I have linked an article below which will help you to accurately measure your leaf springs to ensure you get the correct length. With your 5th wheel trailer having a 12,000lb GVWR you will most likely have 6,000lb double eye leaf springs like # e34SR. While you can use either this Spring # e34SR which is 25-1/4" and the Spring # e47SR which is 25-1/8" on the same trailer as they are so close in size the particular difference in these springs is the amount of leaves they use. Having more...
  view full answer...
• 4-Leaf or 5-Leaf Springs 6,000 lb Double-Eye Springs to Replace 26 Inch 4-Leaf Springs
  I believe you are referencing our 6k double-eye leaf springs, the 4-leaf, 25-1/8" long # e47SR and 5-leaf, 25-1/4" long # e34SR. The number of leaves won't make a huge difference, but fewer leaves can give you a slightly softer ride. So to replace your current 26 inch leaf springs, I recommend going with the 4-leaf option: - 4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/8" Long # e47SR
  view full answer...
• Determining What Leaf Spring You Will Need For A 2021 Reflection 303RLS
  To find the proper replacement leaf spring for your 2021 Reflection 303RLS you will first need to measure your double eye leaf spring from center of hole to center hole across the curve. I would also need to know the weight capacity of your axle. The 5-Leaf Double-Eye Spring # e34SR measures out to be 25-1/4 inches from center of spring eye to center of spring eye. The spring is rated for a 6,000 pound capacity and has 5 leaves. It has a sturdy steel construction and the nylon bushings...
  view full answer...
• 6,000 lb Leaf Spring Recommendation for a 2003 Holiday Rambler Presidential
  The 5 leaf spring part # e34SR would be the best choice since a bit more fender clearance is desired. This will match right up to your trailer and will work well. As long as you pick out the correct dimension EZ flex to replace the equalizers on your trailer no fender clearance would be lost either. You are going to have to measure your current equalizers to find the correct one. The part # K71-653-00 is a replacement for a 7-3/4 inch equalizer and the part # K71-652-00 is a replacement...
  view full answer...
• How to Figure Out Correct Replacement Leaf Springs for 2000 Keystone 2850RK Montana
  Most RV manufacturers don't keep a record of the original parts they use when it comes to suspension which is why it is a pain to figure out sometimes (as you have experienced). While I don't have a specific part number I can tell you will work, I definitely have some tips on how to choose the correct replacement leaf springs for your 2000 Keystone 2850RK Montana. The first thing to do is determine your axle weight capacity. From what I could find it looks like your GVWR (gross vehicle...
  view full answer...
• Pick out Replacement Leaf Springs for 2018 Grand Design 303 RLS
  I would need to know the length of your current springs and we'd be able to help pick out the correct replacements. The etrailer springs part # e34SR are for a 6k axle like you have and are a very common size at 25-1/4 inches. Keep in mind that old worn out springs do stretch a little bit as they flatten out so if yours is a little longer than this it would be perfect. Another common size is 26 inches like the part # e94SR.
  view full answer...
• Can 5-3/4 Inch or Similar Size Equalizer Replace 7-3/4 Inch Equalizer
  It's not uncommon for a trailer with a 29-1/2 inch axle spacing to use either 7-3/4 inch or 5-3/4 inch (or similar) equalizers but the shorter ones are more commonly used with the 25-1/4 inch leaf springs, like the ones you have, designed for up to 6,000 axles. So, the Lippert # LC279687 could potentially work for you. Keep in mind that the previous trailer owner could have been using shorter shackle straps to make up for the longer equalizers. Otherwise, an equalizer that is too long...
  view full answer...
• Replacement Leaf Spring for 2021 Grand Design Reflection 315RLTS
  Based on information we have from another with a 2021 Grand Design Reflection 315RLTS it has leaf springs measuring 25-1/4" from eye to eye. You can upgrade from the 5,200lb springs to the 6,000LB Leaf Spring # e34SR. This will require you to change out all 4 leaf springs.
  view full answer...

Do you have a question about this Trailer Leaf Spring?