Will the etrailer 5-Leaf Double Eye Leaf Springs Fit a 2018 Prime Time Avenger 31DBS

Question

Question:

Does this fit a 2018 prime time avenger 31 DBS?

asked by: ANTHONY S

0

Expert Reply:

Anthony, unfortunately we don't have a master list of all the fits and non-fits for the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e34SR but you can easily measure the leaf spring that you're replacing to verify.

If your current leaf spring unloaded measures 25 1/4" from center to center between spring eyes and has 1 3/4" wide springs then this will work for you.

expert reply by: Bryce D

0

Leaf Spring Measurements
(click to enlarge)

Answer 1

What we have that matches what you listed the best is the leaf spring part #e34SR which is a 25-1/4 inch long spring for 6,000 lb axles like you need. Only difference is this is a 5 leaf spring and you said yours was a 4. Aside from that this would…

view full answer...

Answer 2

The amount of leaves won't make a huge difference on whether they will flatten out or not as what really matters is the capacity of the spring relative to the axle and trailer weight. I would go with at least ta 4,400 lb leaf spring or…

view full answer...

Answer 3

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 4

Anthony, unfortunately we don't have a master list of all the fits and non-fits for the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles #e34SR but you can easily measure the leaf spring that you're replacing to verify. If your current…

view full answer...

Answer 5

Yes, going from a 4 leaf to a 6 leaf spring would add slightly to your ride height. For example, if the current 4 leaf spring has 3/8" thick leaves, and you go to a 6 leaf spring with 3/8" thick leaves, you would be adding 3/4" of…

view full answer...

Answer 6

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 9

The hangers you currently have on your trailer are ones I have run into before. That being said, I spoke with MORryde and the #MR27ZR will still fit your trailer, but there is a modification that will need to be made. You’ll have to trim according to…

view full answer...

Answer 10

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

view full answer...

Will the etrailer 5-Leaf Double Eye Leaf Springs Fit a 2018 Prime Time Avenger 31DBS

Product Page this Question was Asked From

Continue Researching