Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks - 3K
(125 reviews)
Price: $33.33
In Stock
Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks - 3K
Item # TJD-5000-FT
Our Price: $33.33
In Stock
- All Info
- Reviews (125)
- Q & A (0)
- Videos (1)
- Photos
etrailer Accessories and Parts - TJD-5000-FT
- Camper Jacks
- Trailer Jack
- Legs
- Drop Leg
- etrailer
- 1-3/4 x 1-3/4 Inch Tubing
Replaces the drop leg and footplate for your etrailer or Ram square, direct-weld trailer jack with a 3,000-lb capacity. Designed for TJD-5000 Series jacks.
Features:
- Replaces the drop leg and footplate for your etrailer or Ram square, direct-weld jack with a 3,000-lb lift capacity
- Designed for use with Ram TJD-5000 Series jacks
- Tube width: 1-3/4"
- Drop leg travel: 13-1/2"
- Footplate dimensions: 7-1/2" long x 3-3/4" wide
- Mounting hole spacing: 3-3/8" from center of hole to center of hole
- 3-1/2" Between center of hole on bottom and center of nearest hole
- Pin hole diameter: 5/8"
TJD-5000-FT Replacement Drop Leg and Foot for Ram Direct Weld Square Jack
Video of Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks - 3K
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for etrailer Trailer Jack TJD-5000-FT Review
Today we're going to be taking a look at a replacement drop leg with a footplate for square trailer jacks. This is going to replace the drop leg and foot from your etrailer Ram Square direct-weld jack with a 3,000 pound capacity. This is designed for use with the TJD-5000 series jacks and it can be used for other applications as well. It's made from a steel construction. It's going to feature a durable zinc finish so it's going to do a great job at resisting rust and corrosion. The tubing is going to give us a measurement, outer edge to outer edge, that's going to measure about one and three-quarters of an inch.
It's a square design, so one and three-quarter by one and three-quarter. Drop legs are designed to slide into the inner tube of the jack and secure with a pin and clip. Here on the bottom you can see that the footplate is welded onto the base of the drop leg. The footplate is going to give us a length measurement of about seven and a half inches, and a width measurement of about three and three-quarters of an inch. This is going to do a great job at spreading out the applied weight, even on softer ground to help prevent sinking. It's also going to help increase overall stability.
The drop leg is going to offer an additional thirteen and a half inches of travel. That can be adjusted at about three and three-eighth inch increments. We can tell that by taking a measurement between the two holes right here, so center on center, outer hole to outer hole. That's going to give us a measurement of about thirteen and a half inches, so that's going to tell us how much travel this drop leg offers. The distance between each hole, center on center, is going to measure pretty close to three and three-eighths inch, or excuse me, three and three-eighths of an inch, so that's the incremental height adjustment that the drop leg's going to offer. The pinhole diameter's going to measure five-eighths of an inch, and then we'll go ahead and take a look at the overall height.
Measuring from the bottom of the foot to the top of the tube, that's going to give us a measurement of about seventeen and a half inches. That's going to do it for today's look at the replacement drop leg with the included footplate for square trailer jacks.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
Customer Reviews
Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks - 3K - TJD-5000-FT
Average Customer Rating: 4.8 out of 5 stars (125 Customer Reviews)
Replaces the drop leg and footplate for your etrailer or Ram square, direct-weld trailer jack with a 3,000-lb capacity. Designed for TJD-5000 Series jacks.by: Greg04/28/2024
Prompt delivery and awesome communication. Box was in rough shape when it arrived, but leg was not damaged. Honestly though, if a jack leg can’t handle rough handling during shipment, I don’t want it on my trailer. Thank you for awesome service. .
by: Dan The Boat Man04/07/2024
Good quality and highly recommended maintenance item for your trailer. Many overlook this item until it's too late.
by: Ken 02/20/2024
Good replacement part for the original.
by: Alan 07/27/2023
George, after trying to replace this lost jacketstand from the Dealer who sold me my PJ Trailer with no satisfaction, I went out to their parking lot where I could get good internet access and ordered the replacement jacketstand in a few minutes from E.trailer
by: Scott 10/05/2023
Purchased for my FULTON 2500lb tongue jack as a replacement. Fit perfect, I did have to clear out the pin holes with a 5/8 drill bit as the factory holes appeared to have some burrs but that just took a minute. Perfect replacement.
by: Rick 05/15/2024
It fits like it was meant to. That is great. Thank you.
by: William 12/05/2023
The product I was looking for was available on your site. Notifications were on pint. Thanks again
by: Eric 08/27/2023
Great replacement! Fit perfect and no signs of rust after a year. Make sure to use a stainless steel adjustment pin if you are around saltwater.
by: Phil 04/18/2024
I received my package a day early and the part was just as described and it fit and works great
by: Michael/Cathy02/27/2024
Easy to locate and buy, fit was exact, I did drill drain holes in foot and primer it.
That is why I had to replace, it rusted out around bottom from holding water.
The service and shipping time was great.
by: Gary 09/04/2023
Fit my trailer jack perfect and quick s hipping.
by: Dave P.07/24/2023
Perfect replacement for my worn out and rusted through trailer jack foot. Great price and will buy from again!
by: Scot 04/22/2024
Great service as always
by: Larry 10/26/2023
The product was a perfect fit for my tongue Jack.
by: David03/02/2024
As described - fit perfectly.
by: David07/27/2023
OEM direct replacement. Note the 1.75” outer size is important which fits the lighter duty jack.
by: Frankie06/19/2020
The drop leg was a direct replacement,priced fairly and built nicely. Mine was rusted beyond repair. They sent the leg out very quickly.
by: Wayne 08/24/2023
Exactly what I needed to repair my Fulton Jack.
by: David 01/06/2024
Exactly what was advertised!!!
by: David 03/08/2023
The product was what we expected. The part was ordered, the part was AVAILBLE, the part was shipped, and the part was received and installed. All within the time frame indicated by etrailer. You can't expect anymore than that. Thank you.
by: Robert 10/20/2023
Excellent and fast service, Thank you.
by: Shawn 10/05/2023
Exactly what I needed to replace old fo ot
by: Brent 08/21/2023
Exactly what I needed and quick delivery, thank you!
by: Eric 10/07/2023
Fast delivery!! Thank you
by: John08/17/2023
Product not built to standards the foot should be larger like others are
25
125
Show More Reviews
See what our Experts say about this etrailer Accessories and Parts
- What is the Correct Replacement Drop Leg for My RAM 8000 Series Trailer JackI do have a possible option for you but the Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks - 3K # TJD-5000-FT only has a capacity of 3,000 lbs so that wouldn't be enough for your dump trailer. The possible option I have is the Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs # TJD-7000-FT. This replacement drop leg has a capacity of 7,000 lbs so it will be much closer to your dump trailer's capacity. You will need to take a...
view full answer...
- Thickness of Tubing On Replacement Drop Leg # TJD-5000-FT The square tubing on the Replacement Drop Leg # TJD-5000-FT is 3/32" thick.
view full answer... - Replacement Drop Leg for Dutton-Lainson Bolt-On, Drop Leg Trailer Jack - Sidewind - 2.5K DL22320It sounds like you are talking about the drop leg part of Dutton-Lainson Bolt-On, Drop Leg Trailer Jack - Sidewind - 2,500 lbs Item # DL22320. To replace the drop leg you can use Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks - 3K Item # TJD-5000-FT. I have linked a video review of this leg for you.
view full answer... - Replacement Drop Leg and Cap for Fulton Square JackFor your drop leg, I recommend the Bulldog Square, 18-1/8" Tall Drop-Leg Tube - 7,200 lbs to 10,000 lbs # BD70129201 which has a tubing width of 2-1/4 inches. The replacement cap for the Fulton jacks is # F0917504-00. If you need the pin for the drop leg, use # BD500337.
view full answer... - Will Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks Fit Jack # MJSQ-2500BYes, drop leg # TJD-5000-FT will fit trailer jack # MJSQ-2500B. The drop leg that comes with this jack is 1-3/4 inches square which is the same as # TJD-5000-FT. And it has the same hole spacing.
view full answer... - Replacement Drop Leg Pin for Square Direct Weld Jack with Footplate TJD-5000SThe only replacement pin we offer for the Square Direct Weld Jack w/ Footplate part # TJD-5000S is the Replacement Snapper Pin for Ram Jack Footplates, Casters, and Couplers part # JFC-PN which is designed to secure the Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks part # TJD-5000-FT.
view full answer... - Is There a Replacement Drop Leg for the Bulldog Square Jack - 3,000 Lbs 195354I do have a part number for you, "DF35000324" but the replacement drop leg for the Bulldog Square Jack with Footplate part # BD195354 is no longer available. Therefore, we could only offer you is a new jack, the Bulldog Square Jack with Footplate part # BD195354. The other option you have is to try and find some old stock of the replacement drop leg or possibly find one second hand. I will say, we do offer a very similar type of jack in the Square Direct Weld Jack with Footplate part #...
view full answer... - Replacement Drop Leg for Ram 2,500 lb Square Direct Weld JackThe Replacement Drop Leg # TJD-5000-FT is designed to be used with Ram TJD-5000 Series jacks so if that's what you have it will work for you. You can also compare the dimensions of this leg with your current one to see if they are equal. This replacement drop leg has a tube width of 1-3/4", a footplate that is 7-1/2" long x 3-3/4" wide and a 5/8" pin hole diameter. You can use the accompanying photo as a reference and I've also linked a video review of this part for you to take a look at.
view full answer...
- Replacement Drop Leg for a Dutton-Lanison Bolt On Trailer JackKen, for the Dutton-Lainson Bolt-On, Drop Leg Trailer Jack # TJD-5000-FT you can use the Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks # TJD-5000-FT for a replacement leg.
view full answer... - What is the Lift Capacity of the etrailer.com Square A-Frame Jack # TJDA-5000SThe lifting capacity of this jack is determined by the drop leg. In this case the Drop Leg # TJD-5000-FT that comes on the # TJDA-5000S jack is rated for a 3,000 lb lift capacity. If you are needing a trailer jack that has a 5,000 lb lift capacity then I recommend the Round A-Frame Trailer Jack # TJA-5000-B. There is a drop leg that you can purchase for this jack as well. The Drop Leg # JF-1005H-Z will give you a little more surface area for your trailer jack to use.
view full answer... - Will etrailer Drop Leg TJD-5000-FT Fit 3K Bulldog Trailer Jack BD195369 Yes, drop leg # TJD-5000-FT will work with Bulldog trailer jack # BD195369. There is also the Bulldog version, # BDDF3500.
view full answer... - Replacement Drop Leg Recommendation for Ram Model 2500 Series Drop LegFor your RAM Model 2500 series drop leg jack the correct drop leg replacement you would need is the part # TJD-5000-FT that you referenced.
view full answer... - Distance from Bottom Adjustment Hole to Bottom of Footplate on etraileer.com Replacement Drop LegI went out to the warehouse and found that from the center of the bottom adjustment hole of the Replacement Drop Leg # TJD-5000-FT to the bottom of the footplate measured about 1-1/2" as you can see in the attached photo.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.