Custer Multi-Function LED Strobe Driver - 12 Flash Patterns

See what our Experts say about this Custer Accessories and Parts

• How to Change Between Flash Modes on Custer Multi-Function LED Strobe Driver
  I spoke to my contact at Custer and she informed me that to change between the flashing patterns of the # STR-MRLY all you have to do is touch the green wire to a ground (negative) source momentarily. So you would need to keep touching the green wire to a ground source until the desired flash pattern is found.
  view full answer...
• Availability of Red LED Tail Lights with a Strobe Feature
  You can get any LED lights to strobe by using the strobe driver, # STR-MRLY. There are 12 different flash patterns so you are sure to find one that is going to work for the school buses. Red lights with a strobe feature are not available with a strobe feature built in.
  view full answer...
• Can Custer Multi-Function Strobe Driver Handle 10 Amp Load
  The Custer Multi-Function Strobe Driver # STR-MRLY that you referenced is designed for LED light assemblies that don't draw nearly the kind of power that standard incandescent bulbs do. As you mentioned, this unit has a maximum load of 420 milliamps (which comes out to less than half of a single amp), so it's not going to work for a 10 amp load. Your only option is going to be with a larger strobe driver, which we don't currently have available, or with light assemblies that have a built-in...
  view full answer...
• Availability of LED Light for Use as Third Brake Light
  The # STR-MRLY would not be an ideal solution for a third brake light for either a trailer or vehicle. The part # STL80RB is a very common light we carry that gets used for that application. This light is 17 inches long and 1/1/2 inches wide. Check out the review video I attached for more info.
  view full answer...
• Does the Red Custer 4-LED # STRL4R Have More Than One Strobe Pattern?
  The Custer 4-LED Strobe Light or Running Light - 3-Wire Pigtail - Red # STRL4R has the ability to be used as a running light or a strobe. It does not have a controller to change strobe patterns, so the integrated strobe pattern is what you see in the video and does not change. If you want to utilize a strobe controller, you can connect it to the black wire to give you whatever pattern you desire, but the red wire has only the one strobe pattern. You can use the Custer Multi-Function...
  view full answer...
• How To Wire the Custer Multi-Function LED Strobe Driver To a Pair of Tail Lights
  The Custer Multi-Function LED Strobe Driver part # STR-MRLY can be used with a pair of lights. In order to do this you would simply attach the brown wire from the driver to the power wire of each light. If you were using tail lights then you could use either the stop/turn wire (green/yellow) or running light wire (brown) for this. If this does not answer your question please just let me know.
  view full answer...
• Recommended Warning Light with Ability to View Front and Back
  The Sealed, 4" Round, Double Flash LED Warning Light, 22 Diode - Amber # SLL43AB1 and # SLL43AB2 are the only warning lights we have of that style and they are not double face as you mentioned. We don't have any that are double faced warning lights, but we do have other options that will allow viewing from both sides. The closest to the size/style you are looking for is the Custer Adjustable Emergency Light w/ Magnetic Base - LED - Amber # HF18A-MB but this is only single sided, so...
  view full answer...
• How Can I Get Trailer Lights to Flash when Disconnected from Truck
  If your trailer happens to have LED lights on it then what you could do is use a separate car battery and a couple of Custer strobe drivers, # STR-MRLY or # STR-QRLY, and connect the output wires to the trailer connector wires as needed. This driver is only rated for 420 milliamps though so only about 2 LED lights be driver would work. And if the trailer has regular incandescent lights then it will not work because the power draw would be too high. Another simple option, battery powered...
  view full answer...
  
• How to Change Between the Flashing Patterns of the Custer Strobe Driver STR-MRLY
  I spoke to my contact at Custer and she informed me that to change between the flashing patterns of the # STR-MRLY all you have to do is touch the green wire to a ground momentarily. So you would need to keep touching the green wire to ground until the desired flash pattern is found.
  view full answer...
• LED Lights Are Dim After Installing LED Driver
  It could be a number of reasons why your LED lights are dim. The most common reason is that you may have a loose wire or LED bulb connection. Since you mentioned you just installed the Custer Multi-Function LED Strobe Driver # STR-MRLY, I'm wondering if the brown power wire to the lights didn't get attached correctly and that is what is causing your lights to be so dim. While you're inspecting your wiring, I also recommend checking the other wires, including the white ground wire, and...
  view full answer...

Do you have a question about this Accessories and Part?