Malone Axis Truck Bed and Roof Load Extender for 2" Hitches - 375 lbs
(153 reviews)
Price: $135.01
In Stock
Malone Axis Truck Bed and Roof Load Extender for 2" Hitches - 375 lbs
Retail:$169.11
Our Price: $135.01
You Save: $34.10
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
32% prefer this
7% prefer this
- All Info
- Reviews (153)
- Q & A (0)
- Photos
Malone Truck Bed Extender
- Hitch Load Extender
- Malone
- Adjustable Height
- Adjustable Width
- Steel
- 28 - 48 Inch Wide
- Black
Features:
- Vertical position creates rear of vehicle load bar
- Horizontal position extends the bed of a truck
- Integrated side arm helps contain load
- Anti-wobble bracket reduces movement and noise
- Powder coated steel construction resists corrosion
- Includes:
- Left and right side arms
- Receiver hitch mast
- T-crossbar
- Center mast
- Hitch pin
- Anti-wobble bracket
- Hardware kit
- Instruction manual
Specs:
- Fits 2" x 2" trailer hitch receivers
- 8 Height settings - 55-1/2" to 62-1/2"
- 10 Width settings - 28" to 48"
- Height from inside top edge of receiver tube to top of crossbar:
- Lowest position: 15"
- Highest position: 22"
- Distance from center of hitch pin hole to outer most edge of extender: 53"
- Weight: 30 lbs
- Load capacity: 375 lbs
- Limited lifetime warranty
MPG907 Malone Axis Truck Bed and Roof Load Extender for 2" Hitch - 375 lbs
Item # MPG907
Installation Details
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Defective
- Arrived Damaged
Customer Reviews
Malone Axis Truck Bed and Roof Load Extender for 2" Hitches - 375 lbs - MPG907
Average Customer Rating: 4.7 out of 5 stars (153 Customer Reviews)
by: Michael 04/17/2024
My Ridgeline is only 7.5' deep with the tailgate down which make it dicey to load more than 8' goods. The Malone extender makes carrying longer items a breeze. I have carried many 12' lumber loads with confidence. It assembles and breaks down rapidly with no tools necessary. And all of the pieces easily fit into the in-bed trunk. Great product!
by: Gary01/09/2024
I bought this to haul long boards in my Nissan Armada. I have used it numerous times in the first year. Definitely an excellent purchase!
by: Glenn12/10/2023
The Malone truck bed extender is "just what the doctor ordered." I am very pleased with the product. As advertised, I can assemble it in minutes. The price is right. And the functionality of my Nissan Frontier bed has been greatly improved.
by: Clay 01/25/2024
This extender works great for a kayak and also for hauling lumber.
by: KTG11/03/2023
Use it for both lumber and steel (14'-16') in F150 with 6.5 foot bed. Quick set up and breakdown. Storage is a little awkward due to size but no too bad.
by: Marc08/26/2022
Great product. Assembled right out of the box and loaded one heavy 17' canoe, two 18' kayaks, and lumber to build the storage rack. Carried them about 400 miles with no problem at all---no swaying, no metal fatigue, no stress (except for tailgating 18 wheelers). Highly recommend this carrier.
by: David 04/11/2024
Very simplistic design and has versatility. I did not get to try yet, but I have no worries about it.
Depending on your distance of travel, you may want to use bolts in place of the quick pins.
by: Donald 10/13/2023
I love this product do to its easy operation and the multi ways you can adjust it.
Its sturdy enough to handle almost anything.
Great tool to have if loading long items in your truck
by: Raymond07/13/2022
This would be a five star rating, but I had to run an M8 X 1.25 tap through one of the anti-rattle holes to get the knob to attach. The rack is top notch, and the anti-rattle features are not required but certainly are a plus. I installed this on a 2022 Toyota Tacoma after buying another brand that would not go high enough to be level with the bed. Buy the Malone Safety Flags while you have free shipping from etrailer.
by: Herbert 09/16/2023
Good setup but needs padding on cross bar and would be nice if you could collapse the secondary support bar when it is in the vertical position to allow access to your tailgate. Had some sort of material in the primary tube that still has not come out. Easy to assemble.
by: Robert 02/19/2024
Purchased to enable transport of 30 ft ladder.
Very pleased with this option. In addition, should be useful in moving sheets of plywood in my Tacoma.
by: Brian 06/02/2023
This guy is awesome... Just opened my own garage door service biz and this will allow me to easily move door panels. I'll be running plywood from the tailgate past the tee for decking so panels don't flex during transit. Awesome affordable option for me... better than a $3500 trailer at this point.
by: John 11/01/2023
Limited use so far, but it seems well thought-out. Much quieter than I expected.
by: Tim 09/30/2021
I have owned this extender for one year +. I use it to carry two 12.5 ft. Kayaks. The extender does its job, safely and securely carries the yaks all over the Midwest. The only modification I made was to the "goalpost uprights" I cut a swimming noodle to length, cut a slit to allow the noodle to fit over the uprights. The uprights are a hard point of contact, and needed something to protect the kayak. Quality product.
by: Yolanda03/15/2023
Outstanding truck extender. Easily assembled by a 63-year-old petit lady. Added an accessory roller to easily slide a ten-foot plus kayak. Easy to disassemble into two separate parts for easy storage. Even though extender includes traffic safety reflector tape, it does NOT include a traffic safety flag. Can’t wait to use it to transport my fishing kayak this summer.
by: Vic 08/22/2021
Value driven purchase -- IMO eTrailer is "the" online retailer -- the Malone extender is EZ to assemble, and works as advertised -- shipment via UPS with no issues -- three days from online order to doorstep-- as we say down south, "ya can't beat it with a stick" -- great email follow up from real person & not a third party marketing company -- eTailer is my "go to" for truck accessories -- cheers //
by: Sean 09/06/2023
Easily extends the bed of my truck to safely transport a 14’ kayak. Easy to setup and use.
by: William 04/15/2023
Sturdy enough with the clamp on. Fit my Honda Ridgeline perfectly.
by: JohnNapier07/14/2023
I have used this more than I thought. Works great and is solid. You need a wrench for two bolts to install or remove, but it's an easy install.
by: Charles07/28/2023
Wobbles pretty badly and there is no straightforward way to secure It in a stable upright position
by: Steve 07/25/2023
Excellent product for the price!
by: William 08/24/2020
This is a very nice bed extender. It’s strong,easy to assemble and meets safety requirements.I love mine and use it everyday at work.
William N.
8/25/2021
It’s a great product and I’m very pleased with it.
by: Jason06/20/2020
Works great in my 2013 F-150 5.5ft bed. I like how the bottom bar is angled upward, this prevents it from scraping on my steep driveway.
I ordered some extra DOT red/white reflective tape from Amazon to add to what was already there.
The anti-wobble clamp bracket is a big plus, not every bed extender comes with one of these and those that don't have it rattle back and forth everytime you go over a little bump.
My main use is lumber and my kayak.
by: Robert06/03/2018
etrailer processed and shipped the Malone Axis Truck Bed and Roof Load Extender on the same day ordered and it arrived 3 days later. Assembly was a breeze and it appears to be just what we needed for carrying long loads in our Tacoma bed or going vertical with the extender and using it for loads across the roof or over the tailgate. We look forward to putting it to use with 10 ft kayaks, a 17 ft canoe and all sorts of lumber and other long items. It is heavy duty, well built and flexible in how to orient the extender for a given load. The parts are a bit loose fitting so expect a bit of rattling, but that may better than tight fitting pieces that could be difficult to assemble. It comes with a brace that fits over the top of your hitch and over the 2x2 tube of the extender to firmly stabilize it in place at the hitch. My bet is the load on the extender will tighten the other components so rattle may only be noticeable when in the hitch without any load on it. So far, it appears to be just what we needed in terms of flexibility of use (vertical and horizontal) and in the load it will handle (375 lbs).
by: Scott05/18/2022
I love the Malone truck bed and roof load extender! As a cancer patient, I have lost a lot of strength recently, and loading my heavy kayak alone was too much. With this, I can either load it inside my Toyota Highlander or turn the extender to load it on the roof rack. Now I am able to get out without having to bother people for help.
25
152
Show More Reviews
See what our Experts say about this Malone Truck Bed Extender
- Adjustable Heights of Malone Axis Truck Bed and Roof Load ExtenderThat depends on the height of your 2019 Toyota 4Runner's back window (we don't have those dimensions, unfortunately); it is likely to work as an extension for your roof for sure, but your back window may not be high enough to use the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches # MPG907. You will need to take some measurements and compare that to the adjustable heights of the Axis Extender, which is adjustable from 55-1/2 inches to 62-1/2 inches. I have added some links...
view full answer... - Can the Erickson Big Bed Load Extender Be Used As a Roof ExtenderThe Erickson Big Bed Load Extender part # EM07600 is a bed extender only. That said, we have plenty of options which are both a bed extender and roof extender like the Erickson Big Bed Junior part # EM07605 or the Malone Axis Truck Bed and Roof Load Extender part # MPG907.
view full answer... - How To Haul Two 10' Kayaks In The Bed Of A Truck In order to haul two kayaks in your 2016 Toyota Tacoma without placing them on the roof of your vehicle, you will need to use a load extender such as the Malone Axis Truck Bed and Roof Load Extender part # MPG907 if the bed of your truck is empty. The extender can be positioned for both vertical and horizontal load extensions. In your case, you will want to place the kayaks flat in the bed. This will not interfere with your tri-fold tonneau cover and will safely allow you to haul the two...
view full answer... - Load Extender Options For Carrying KayaksOf your options they all are going to get the job done. If you're wanting something that looks the best I would go with the Yakima LongArm Extender # Y01149. If you're not concerned with the looks go with the Malone Axis # MPG907. It has more ground clearance in it's lowest setting but it's width is only adjustable from 24 inches to 48 inches so it may not be wide enough for your application. The Erickson # EM07605 has a 51 inch width so be sure to measure your kayaks width to see which...
view full answer... - Can a Load Extender be Used to Carry Kayaks Out of an SUVs HatchA load extender like the Malonel Extender, part # MPG907, isn't really intended to carry a load sticking out of the hatch of an SUV like that but it would work the same. This extender at its widest is 48 inches so you need to make sure this is enough space for both your kayaks. The extender has reflective tape on the back but there isn't a flag included. You can use part # EM05308. Then to lock and hold the extender to your hitch receiver I recommend an anti-rattle lock # 63232.
view full answer... - Front Mount Hitch and Load Extender To Support Kayak on 2007 Toyota SequoiaThere is no reason why you couldn't install a front mount hitch and and add a front load bar to help support your Kayak and create more clearance between it and your travel trailer. The front mount hitch I recommend for your 2007 Toyota Sequoia is the Draw-Tite 2 Inch Custom Fit Front Mount Hitch Receiver # 65080 and for the load bar, the # MPG907 you were looking at is an excellent choice with plenty of capacity to support your 22 foot kayak.
view full answer...
- Recommended Front Mount Trailer Hitch Receiver For A 2022 Toyota 4Runner LimitedThe CURT Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31054 is a confirmed fit for your 2022 Toyota 4Runner Limited and has a 2" receiver tube opening to easily install the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches - 375lbs # MPG907. It has an easy, bolt-on installation with a complete hardware kit and installation instructions included. It has a tongue weight capacity of 350lbs and comes with a gloss black powder coat finish over steel to resist corrosion and...
view full answer... - Load Extender Compatibility With 2017 Toyota Tacoma TRD Pro Hitch ReceiverThe Malone Axis Truck Bed and Roof Load Extender for 2" Hitches # MPG907 will work with the hitch on your 2017 Toyota Tacoma TRD Pro. All hitches whether factory or aftermarket for your truck will have a 2 inch receiver and that is what is needed for this load extender.
view full answer... - Can Yakima LongArm Extender be Used for Long Kayak and 5-1/2 Foot Bed TruckThe Yakima LongArm Truck Bed Load Extender # Y01149 is a great solution for hauling a longer kayak with your 2019 Ford F-150 5-1/2' bed. When in the fully-extended position the LongArm sits out 48" from the center of your hitch pin hole which means you should have roughly 5' of canoe sitting past that. You can use the Crossbar Pad # Y07417 and some Straps # Y05006 to secure your kayak to the extender. If you'd feel more comfortable with something a little longer then you can use the Malone...
view full answer...
- Can You Add a Third Crossbar To a 2012 Honda PilotI do have an option for you for more support but we don't have any three crossbar setups for a 2012 Honda Pilot. Instead, you will need to add a hitch mounted load support like the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches part # MPG907 which will offer the support you need for longer loads like a canoe.
view full answer... - Recommended Bed Extender for 2001 Ford Ranger to Carry KayakThe good news is that bed extenders rely on the trailer hitch receiver on your truck and they're not going to be vehicle specific-which is why they're not showing up in the fit guide for your specific vehicle. So, as long as you've got a 2" receiver like the Curt # 13138 on your 2001 Ford Ranger you'll be able to use the Malone # MPG907 without any issues. This bed extender will add up to 62" to your truck bed and will provide a nice, sturdy base to carry your 14 foot long kayak. In order...
view full answer... - Will Malone Bed Extender # MPG907 Fit 2004 and 2012 Ford F-150Yes, a hitch mounteded extender like the Malone part # MPG907 would fit both of the trucks you mentioned. If you instead you were referring to something that attaches to the tailgate the answer is probably yes but I would need to know for sure which extender you have.
view full answer... - Roof Canoe Carrier System for Use with Hitch Load Support on 2018 Hyundai IoniqAll roof racks currently made for your 2018 Hyundai Ioniq, shown on the linked page, consist of two crossbars and the related foot assemblies. But since you have a hitch support like the Malone Axis # MPG907 to hold one end of your canoe I do have a good solution for you that will cost much less. We offer canoe carriers that do not require any roof rack crossbar. These cost-effective carriers include items like the Malone Canoe Carrier with Tie-Downs # MPG156. This kit includes 4 foam...
view full answer...
- How To Carry 2 Kayaks On 2018 Silverado 2500 While Pulling 5th Wheel TrailerYou will first need a roof rack on your 2018 Silverado 2500 single cab (work truck). I recommend the SeaSucker Monkey Bars Roof Rack - Round Bars - 48" # 298-SX6000B. Then you will need a kayak carrier such as Malone Stax Pro2 Kayak Carrier w/ Tie-Downs # MPG115MD which can accommodate 2 kayaks. This may work for you without anything else, but since you won't be able to extend the kayaks over the bed, the kayaks may overhang over the front of the truck too much. To solve this, I recommend...
view full answer... - Recommended Roof Rack Extender and Roof Rack For 2017 Honda RidgelineTo use an extending rack like the Malone Axis Truck Bed and Roof Load Extender, # MPG907, will allow you to carry the ladders, kayaks, or whatever else extends from your roof past the bed of your truck. For the roof rack you mentioned, I recommend the Rhino Rack system. All roof racks come with 2 crossbars, so I suggest using both instead of just one to better protect your roof. This rack uses # RRVA150S-2 crossbars, the legs will be the # RRRLKVA, and the fit kit is # DK470. This...
view full answer... - Recommended Kayak Carrier for Rhino-Rack Crossbars on 2022 Ram 2500 Truck BedThe Rhino-Rack # RRVA180B-RRRLT600 has 71" crossbars so you will have plenty of room to add a kayak carrier with the Yakima HighRoad Roof Bike Rack # Y75FR. The Rhino-Rack Kayak Roof Rack # S512-S512X you looked at would be a great choice, especially if you want to carry 2 kayaks. A J-style carrier will maximize your space, and if you're only carrying one you can remove the extension arms. However, if you only have 1 kayak the # S510 would be a better choice. Depending on the kayak and...
view full answer... - Carrying Kayak On Roof Vs. Truck Bed with Malone Axis Truck BedThe kayak can indeed be carried in the truck bed and then the bow/stern secured with a load extender like the Malone Axis Truck Bed and Roof Load Extender part # MPG907. The only downside of this option as opposed to securing the kayak to the roof is that you lose bed space. The great thing about the Malone Axis Truck Bed and Roof Load Extender is that is can be used when securing the kayak to the roof as well if you change your mind.
view full answer... - Is 48 Inch Width The Inside Dimension of Malone Axis Truck Bed ExtenderCorrect, the 48 inches is indeed the inside width of the crossbars on the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches # MPG907.
view full answer... - Recommended Ladder Rack for 32 Foot Ladder on 2013 Ford Super DutyThe Thule Xsporter Pro Truck Bed Ladder Rack - Aluminum - 450 lbs - Black # TH500XTB you referenced is a great start, but a 32 foot ladder will require additional support. I recommend also adding the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches - 375 lbs # MPG907 or the Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 350 lbs, # EM07605 to give you additional support on either the front or back of your vehicle. Ideally for a 32 foot ladder you would have both....
view full answer... - Is Anti-Rattle Device Needed for Malone Axis Truck Bed and Roof Load ExtenderThe anti-rattle bracket that comes with the Malone Axis Truck Bed and Roof Load Extender # MPG907 isn't a necessity but it is good to have as it reduces the amount of movement you'll see with the extender so I definitely recommend using it. You can also swap it out for a tool-free anti-rattle device like the Curt # C27UR or Brophy # RHSB to help speed things up. Attached are some review videos for you to check out.
view full answer... - How To Safely Carry A Kayak On 2012 Toyota Prius CThe Malone Axis Truck Bed and Roof Load Extender - 2" Hitches # MPG907 would certainly fit the 2" receiver on your 2012 Toyota Prius C. If I am understanding you correctly, you are wanting to leave the rear hatch opened so that the kayak can be sitting inside your car, and then use this load extender to support the rear of the kayak. This may work as it is definitely designed to help support loads that extend past the vehicle, however, I am not sure that this would be the best option as...
view full answer... - Where Is the Height Measured for the Malone Axis Truck Bed and Roof Load ExtenderIn regards to the Malone Axis Truck Bed and Roof Load Extender part # MPG907, the distance from the center of the hitch pin hole to the top of the crossbar can be adjusted from 55-1/2" to 62-1/2". I spoke with Malone about the load stops but they were not able to provide any measurements unfortunately.
view full answer... - Recommended Hitch Mounted Bed Extender To Extend Truck Bed Rail Height Cross SupportsWe don't have a system that is quite as precise a fit as what you are asking for a bed extender on your Nissan Frontier. The bed extender we have that is most likely to meet your needs is the Malone Axis Truck Bed and Roof Extender # MPG907. This is only because of the goal post style carrier to give you that increased height. Along with the 7 inches of vertical adjustment to meet the bed of your truck. You would still need to have a cross support for this functionality on the extender.
view full answer... - Recommended Longest Load Extender For Hauling Kayaks In A Short Bed Truck The longest option is going to be the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches # MPG907, which has a 53" length from the hitch pin hole to the furthest point on the extender. This extender comes with a 375lb load capacity but you'll still want to verify the tongue weight capacity of your truck's hitch. Since you're wanting maximum length I recommend also picking up the Erickson Mesh Safety Flag w/ Bungee Cord # EM05308 as there typically are local or state laws about...
view full answer...
Do you have a question about this Truck Bed Extender?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
Zach D
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Jessie B
Updated by:
Alex H
Updated by:
Matthew E
Updated by:
Isabelle B
Updated by:
Carrie F
Written by:
Jonathan S
Test Fit:
David F
Video by:
Adam E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Tim
10/2/2022
One year later and still rollin. Very satisfied with quality of the product.