Recommended Kayak Carrier for Rhino-Rack Crossbars on 2022 Ram 2500 Truck Bed

Question

Question:

can you add the bike carrier and a kayak carrier to these crossbars over the tonneau cover? if so any suggestions? thanks

asked by: Jay

0

Expert Reply:

The Rhino-Rack # RRVA180B-RRRLT600 has 71" crossbars so you will have plenty of room to add a kayak carrier with the Yakima HighRoad Roof Bike Rack # Y75FR.

The Rhino-Rack Kayak Roof Rack # S512-S512X you looked at would be a great choice, especially if you want to carry 2 kayaks. A J-style carrier will maximize your space, and if you're only carrying one you can remove the extension arms. However, if you only have 1 kayak the # S510 would be a better choice.

Depending on the kayak and your bed length, you may also want to consider adding the Malone Axis Truck Bed and Roof Load Extender # MPG907. This will help keep the kayaks stable if they're hanging out over the back of the truck.

expert reply by: Robin H

0

Answer 1

Yes, the Rhino-Rack Vortex Crossbars #RRVA180B-RRRLT600 will fit the Pace Edwards UltraGroove #311-KRC3250 on your 2022 Ram 2500. This will also require the Adapter Kit for Rhino-Rack RTL600 Legs #RRT-FK1. Once installed, you will be able to add a…

view full answer...

Answer 2

Since the Adarac ladder rack #A49FR that you referenced installs through the top of the bed rails it would not interfere the function of your BakFlip tonneau cover #BAK26203 you have installed on your 2018 Ram 3500. For J-style kayak carriers…

view full answer...

Answer 3

I would be happy to help you find a tonneau cover and compatible ladder rack for your 2021 Ram 2500 Crew Cab 6-1/2' bed without RamBox. The BAK Revolver X2 Hard Tonneau Cover - Roll Up #BAK39213 is a very popular option. This gives you the…

view full answer...

Answer 4

The crossbar spread will vary depending on the accessory you want to put on the roof rack. The Yakima FrontLoader Wheel Mount Bike Carrier, part #Y02103 will work with a crossbar spread between 16 and 48 inches, so you can see it will work with most…

view full answer...

Answer 5

You'd need the longer crossbar version Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 which is 71 inches long as this is the size for full size trucks. The smaller size you…

view full answer...

Answer 6

Rhino Rack actually has a kit designed specifically for fitting the tracks of a RetraxPro XR ladder rack with the part number #RRVA180B-RRRLT600. This kit includes the feet you mentioned #RRRLT600 which fits the tonneau.

view full answer...

Answer 7

I reached out to my contact at Rhino-Rack and she reported that the Rhino-Rack #RRRLT600 legs will fit into RTC tonneau cover channels. Then you will need the Rhino-Rack #RRVA180B cross bars to fit into those legs.

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...