bing tracking image
  1. Truck Bed Extender
  2. Erickson
  3. Hitch Load Extender
  4. Adjustable Height
  5. Steel
  6. 51 Inch Wide
Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs

Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs

Item # EM07605
Retail:$171.54
Our Price: $112.04
You Save: $59.50
Truck Bed Extender
Shipping Weight: 31 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The Big Bed Junior lets you safely and easily carry loads that extend past the bed of your truck or UTV. Use it as a bed extender, or use it as a high-mount load bar that lets you haul cargo above your bed and level with the roof of your cab. Great Prices for the best truck bed extender from Erickson. Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs part number EM07605 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (170)
  • Q & A (0)
  • Photos

Erickson Truck Bed Extender - EM07605

  • Hitch Load Extender
  • Adjustable Height
  • Erickson
  • Steel
  • 51 Inch Wide
  • Black

The Big Bed Junior lets you safely and easily carry loads that extend past the bed of your truck or UTV. Use it as a bed extender, or use it as a high-mount load bar that lets you haul cargo above your bed and level with the roof of your cab.


Features:

  • Load extender makes it safe and easy to carry long cargo like lumber, canoes, and ladders with your truck, SUV, or UTV
  • Bed extender configuration lets you carry extra-long loads that extend past your truck bed
    • Extends 4' from your vehicle's hitch
  • High-mount load bar configuration lets you haul cargo above your bed and level with your roof
    • Frees up space in your bed for other cargo
  • Adjustable height allows you to level the support bar with your bed or the roof of your cab
  • 2 Integrated tie-down points make it simple to secure cargo
  • Black powder coated steel is durable and rust resistant
  • Easy installation
    • Slides into your trailer hitch receiver
    • Requires hitch pin and clip or hitch lock (sold separately)


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Weight capacity: 350 lbs
  • When used as bed extender:
    • Extension from hitch receiver: 4'
    • Height adjustment (in 1-3/4" increments): 17" to 24"
  • When used as high-mount load bar:
    • Extension from hitch receiver: 11"
    • Height adjustment: (in 1-3/4" increments): 55-1/4" to 62"
  • Width of load bar: 51"
  • Weight: 25.5 lbs
  • 90-Day limited warranty


Securely transport your long cargo with the sturdy steel Big Bed Junior load extender. It lets you safely and easily carry lumber, canoes, ladders, construction materials, and other loads that extend past the bed of your truck, SUV, or UTV.


The installation of the Big Bed Junior is quick and easy. Just slide the load extender into your 2" x 2" trailer hitch receiver. A hitch pin and clip or a hitch lock (sold separately) is required to secure the Big Bed Junior in your hitch.


Erickson Big Bed Jr as Load Extender

To use the Big Bed Junior as a bed extender, simply connect the support bar to the short end of the extension bar. The Big Bed Junior extends 4' from your trailer hitch receiver, giving you plenty of space to carry your lengthy cargo. The height of the mast can be adjusted to level the support bar with the bed of your truck. Two integrated tie-down points make it simple to secure your load.


Erickson Big Bed Jr as High Load Mount

You also have the option of converting the Big Bed Junior load extender into a high-mount load bar. Simply connect the support bar to the long end of the extension bar so that the support bar is level with the roof of your cab. This makes it easy to transport canoes, ladders, drywall, and other long items above your truck bed, and it frees up space in your truck bed for hauling other cargo.



07605 Big Bed Jr Load Extender by Erickson Manufacturing





Customer Satisfaction Score:


Customer Reviews

Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs - EM07605

Average Customer Rating:  4.6 out of 5 stars   (170 Customer Reviews)

The Big Bed Junior lets you safely and easily carry loads that extend past the bed of your truck or UTV. Use it as a bed extender, or use it as a high-mount load bar that lets you haul cargo above your bed and level with the roof of your cab.

by:

I use the bed extender several times a week, and this thing is stout! I got it to help load and unload my Solo Skiff. I am able to stand on the lower hitch part and rest the Solo on it. I also use it as a step into the hed of my truck, 3500 GMC. I love this product.

Matthew K.

12/19/2017

Bed extender working great after a solid year of hard use. Minus a little rust from salt water exposure, it is flawless. Excellent purchase.



by:

Product worked as advertised and as expected. See photos - the only way to haul 16' lumber in the 5 1/2 foot bed of an F150. My only complaint was the limited height adjustment. I have a Decked drawer storage system in the back of my truck so the cross bar was too low on its highest setting. As shown in the photos, I had to add an 8 inch riser to get up to the level of the bed. But it was easy and worked well with this new part. Be careful on steep driveways so that the hitch extension does not scrape. Good product - worth the cost.

Etrailer Expert

Heather A.

6/28/2021

Thank you for your review. If you need a bed extender that allows for more height adjustability, I recommend the Yakima LongArm Truck Bed Load Extender part # Y01149 which can be adjusted to 46 inches in height.



by:

Best one in its class and price range. Worked great for canoe and kayak transport. Does wiggle a little bit, but hey, what do you want. I would suggest that if you are transporting something with a decent finish, like other than a cheap canoe or kayak that you consider using a lengthwise cut hollow pool noodle or pipe insulation wrapped around, and secured with duct tape, the T to protect from rubbing and scraping during transport or load/unload. If your transporting lumber or ladders, who cares. But the padding will prevent any sliding as well. When the load is secured with tie downs, the rattling is negligible and very secure. Well thought out product and I would recommend this one as reliable and very price competitive. Oh, and the black powder coat paint makes it look cool too.

Fastjohnny

8/18/2023

Works fine. Ive gotten it stuck on trees and buried the end in a dirt embankment and no bending or twisting. Price is right and would I buy it again, of course. Would I recommend it to someone, absolutely...the only problem is that my friends are such cheapos that they would rather dent their cars and trucks with loading stuff, than to spend such a small price for the item...go figure.



by:

Amazing product. We can carry 3+ kayaks on the bed of our jeep truck. Def worth the money



by:

Shipped sooner than expected. Sturdy rack made to last. I added a tail/stop light for additional safety. Got the light and trailer plug here also.

Kenneth

9/6/2019

I use it as a rooftop extender on my SUV. Works very well when I need to haul a few long boards or sheets of plywood. Saves on having to use my trailer for small loads.



by:

The extender was long enough but loose in the 2x2 hitch reciever. It should be a little wider for a tighter fit. Definitely need a hitch sway bar bracket. The T-bar was also loose (same reason) when fit over the extender. I opted to use a 3" bolt rather than the hitch pin (not shown in this picture), to keep it from swaying, although not in a dangerous way. Also highly suggest adding the pool noodles for visibility, less slippage for items, and also to keep potential damage to tailgate if accidentally lowered. The 14" extender previously mentioned added to this should allow for almoat all tailgates to open. Vehicle is a 2019 Ram 1500 Limited (New style)



by:

Ordered the Big Bed Junior Load Extender to haul my 12-foot kayak easily in the bed of my small pickup instead of having to deal with roof rack saddles on car (plus just the effort of lifting and loading). Installation was very simple and straightforward, and as the picture shows, it definitely gets the job done. Four stars vs. five b/c I am surprised at how much slop there is in both how the parallel-to-ground L-shaped bar fits in the hitch and how the crossbar fits on top. May do some duct-tape wrapping to reduce the amount of play in these fittings. That said, have driven locally on a bumpy gravel road and over RR crossing with no issues; have not yet tested hauling boat at highway speed. Five starts plus for etrailer customer service and shipping on my order, btw!



by:

HAVE NOT USED IT YET. BUT I THINK IT WILL WORK VERY WELL FOR HAULING LUMBER AND OTHER THINGS AND I THINK IT WILL WORK WELL FOR TRANSPORTING CANOES.

Terrell

11/27/2023

It has worked very well for transporting kayaks during the paddling season and leaving bed free for camping gear. I like that it is so versatile in the adjusts you can make to accommodate your haul needs. Great rack!



by:

Love being able to take our big kayaks with us. How ever we got a blue ox tow bar from you. You didn’t catch that it was the wrong one for my maverick Blew out 2 bars in 9 months. Blue ox didn’t catch it till second one broke. On the right track now



by:

Purchased Big Bed Junior Tailgate Extender for my 2000 Escalade. Planning on hauling 12' lumber this summer to build a storage barn for my son. Support T ends up right at 11' from the back of the folded down vehicle seats, so it's perfect for 12' lumber. Would be nice if you had a split support piece that could be bolted on anywhere between the vehicle and the end of the 4' extension, so that another T upright could be attached. That way you could support shorter materials such as 10' pipe, trim, or lumber. Now it appears that I'll have to start with a 12' piece and then strap the shorter materials to it. Overall a very nice unit and reasonably priced. Am happy with the purchase.

John O.

3/17/2018

Great product. Worked as described.



by:

Just came today. Tried it out on my Jeep Gladiator and fits nicely. Extends my load area to 9 feet. Will be very handy for carrying long pieces of wood. Should be able to carry my 2 16' kayaks.

Bill

2/23/2023

I have a Jeep Gladiator. It has a small bed and the extender is great for carrying items that stick out well beyond the bed. Ive used it to carry lumber and drywall up to 16 feet long. I also have a pair of 17 foot kayaks that I intend to use it with. Its a whole lot easier to load 65 pound kayaks in the bed with the extension rather than get more equipment to make overhead racks.



by:

Just what we needed to transport our kayaks! The pic shows how perfectly they fit! Super easy to connect to hitch. Great product at a great price. Thanks for the fast shipping too!



by:

Works great!



by:

I like the product, but feel that the tube steel doesn't insert far enough in the hitch opening when the holes line up. I'm tempted to drill new holes to be able to set in more. It would be stronger that way.



by:

I've used this several times now and have no complaints. It's very sturdy and well made, and the simple design makes it very east to disassemble and store in the back seat of my truck. I works very well for its intended use, and unlike some others reviews I have no issues with it seeming "loose" or rattling, nor have I noticed this while I drive. If it were any more tight-fitting it would be more difficult to put together and take apart, and that would be a serious flaw. I'm very happy with this product. It makes loading, transporting, and unloading my kayak a breeze.



by:

The unit was made in China. The welds are poor and the long part of the two was misaligned when welded, not at 90 degrees. The misalignment causes the cross bar to sit at an 10 to 15 degree angle from normal in the horizontal or vertical mounting position. I weigh around 225 pounds and stood on the unit at the longest point, it creaked a little but it held my weight. Although it is rated for 350 pounds, I would be cautious if it is loaded to the max. It is easy to install, and stores in a minimum amount of space. I will use it to support 2 kayaks while most of the weight of the kayaks will be in the bed of the truck. It should have a light kit available for purchase.

Doc

9/2/2016

Products are still doing great.



by:

Works very well transporting 2 pungo kayaks, easy to assemble, extremely durable, great price on etrailer. Shipping fast, arrived 1 day early. Would be 5stars but kit only comes with 1 hitch pin. Doesn't say anywhere on website, FAQs, or specs that only 1 is included. If I had known 2 weren't included I woulda have ordered at same time.

Michelle

6/28/2021

AWESOME!!! After a year, We love it, totally recommend this to everyone.



by:

This product arrived on schedule and in prefect condition. The construction looks to be high quality, and the price was very competitive. I have attached it to my pickup truck receiver hitch, and everything fits. I haven't tried yet to carry the canoe, so I can't speak yet about how it works under load and driving conditions. Once I have a chance to use it I will try to get back into this review and add something about how it works. From what I have seen so far, I think it will do exactly what I hoped it would.

Craig G.

6/15/2018

Since first posting a review, I have used the cargoe carrier to carry my canoe to an area lake, including driving on the highway. It worked very well. No problems. I would recommend this product without reservation.



by:

This was the perfect balance of utility and storability. I didn't want a full time rack on my truck. This extender allows me to carry my ladders and kayaks while not having drive with a rack on the truck all of the time. The shipping from etrailer.com is stupid fast. I really love the reviews and product information that is available on the website.



by:

I bought this product to carry a canoe in the over-head position on my Tacoma. The fit in the receiver was good and the wobble was minimal. The welds all look good, everything is straight and the 90's are true. I especially liked the added brace at the 90 degree joint on the main piece. The long tube on the main piece is double-walled for added strength. This extender is equal to or better than anything I've found online.

Ken R.

4/23/2018

I like the truck rack and it works well. I wish there was an option to add a bike rack to the base frame. Then Id have the best of both worlds: a canoe carrier and a 2 bike rack with the same hardware. Seems that someone with your expertise could invent that combination.



by:

Main use is for my tandem kayak with a short bed truck

Todd

5/10/2023

yes



by:

Box destroyed during shipping. Pin location needs to be set back farther to allow more of it to go into the receiver. One poor weld on the T bar. Design nice, reflector nice. Should come with at least one pin for the top T bar.

Tw

5/5/2018

Holding up no issues



by:

I found the Bed Extender to be substantially built. I used it to haul 2 kayaks before I decided on a cap. It did the job, with one nagging issue. The straight extender was reasonably tight in the receiver and presented no problem. when I put the vertical T on the extender I found there was a substantial amount of play in the fit, and it allows the t bar to wobble terribly. I had to run ratchet straps to the truck tie downs in order to keep it from swaying side to side. Ok from short distance to get lumber etc., but not good for long distance 300-500 miles with 2 kayaks on the extender.



by:

Great product. Already using it to haul my kayaks around. Just wish the length was adjustable like the height is. But I'm happy with it. Got it in 4 days from ordering so that was a surprise. Thought it be two weeks

Matt B.

7/30/2021

Very useful! Used it to haul my rowboat and kayaks with no issues. Even added some lights to it for better visibility to the vehicles behind me. Just plugged them into the trailer hitch lights.



by:

This is so simple to use and it is securing my canoe or ladder perfectly. I have not used it as a horizontal extension yet for maybe long lumber but imagine it would do great. The finish and quality are top spec and this will serve for decades. Thanks!

Steven

4/9/2019

Great! I use it to load my canoe on to my roof rack. This makes it a breeze for one person. Otherwise it’s scary with two.


25
170
Show More Reviews

See what our Experts say about this Erickson Truck Bed Extender

  • Weight Capacity Rating for Erickson Big Bed Junior Load Extender # EM07605 is it Certified by Anyone
    The Erickson Big Bed Junior Load Extender # EM07605 is rated for 350 pounds maximum as tested and rated by the manufacturer. There isn't a specific governing body for hitch mounted accessories like there are with actual trailer hitches. The manufacturer does the testing and rates the product accordingly.
    view full answer...
  • Load Extender Options For Carrying Kayaks
    Of your options they all are going to get the job done. If you're wanting something that looks the best I would go with the Yakima LongArm Extender # Y01149. If you're not concerned with the looks go with the Malone Axis # MPG907. It has more ground clearance in it's lowest setting but it's width is only adjustable from 24 inches to 48 inches so it may not be wide enough for your application. The Erickson # EM07605 has a 51 inch width so be sure to measure your kayaks width to see which...
    view full answer...
  • How to Reduce Erickson # EM07605 Big Bed Junior Bed Extender Wobbling in Hitch Receiver
    If the # EM07605 is wobbling around in the hitch, you can use an anti-rattle hitch lock like # 63232. If it rattles where the T-section attaches to the rest of the unit, use the lock there. You could use two of them if needed. I've linked you to a video showing how the lock is used.
    view full answer...
  • Compatibility of Standard Hitch Pin and Lock on Yakima LongArm Truck Bed Load Extender
    The Yakima LongArm Truck Bed Load Extender - 2" Hitches - Aluminum - 300 lbs # Y01149 comes with a threaded shank for a threaded pin which is also included. It will not work with a regular hitch pin. If you want a locking pin, then you will need the # Y07235 for this application. If you want the ability to use the standard hitch pin or standard hitch pin lock, you may want to consider an alternative like the Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350...
    view full answer...
  • Recommendations To Be Able To Carry 2 Kayaks On Hyundai Accent
    All of the hitches we offer for a Hyundai Accent are Class l hitches. The Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs, Item # EM07605 is designed to fit a 2 inch receiver opening. If you use a hitch adapter to make the 1-1/4 inch receiver on your Accent able to accept 2 inch shanks it reduces the load carrying capacity of the hitch by 50 percent. I do not recommend using a system like this but may have an option that will work for you. Using this...
    view full answer...
  • Dual Kayak Carrier For 2017 Ram 1500 With Tonneau Cover
    I would recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500, the Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK043. I've included a video to help you install if you wanted to go that route. Then the most cost effective carrier would be four of the Malone Rack Pads # MPG314, two per crossbar. The foam pads will be less rough on your kayaks whenever you're going down gravel roads....
    view full answer...
  • How To Help Stabilize the Erickson Big Bed Junior Hitch Mounted Load Extender
    In order to help secure the Erickson Big Bed Junior Hitch Mounted Load Extender part # EM07605 inside of the trailer hitch receiver you can use the Anti-Rattle Trailer Hitch Receiver Lock part # 63232 which works to both reduce movement and offers theft deterrence. That said, this is a common complaint of the Erickson Big Bed Junior Load Extender and there can still very well be an issue with the connection point for the top portion of the extender so a better all around option is to...
    view full answer...
  • Will Erickson Big Bed Junior Load Extender EM07605 Fit 2016 Toyota 4Runner Trailer Hitch
    The factory trailer hitch on your 2016 Toyota 4Runner has a 2 inch receiver so it will be compatible with Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs Item # EM07605! I have linked a video review for you.
    view full answer...
  • Load Rating of Erickson Big Bed Junior Load Extender EM07605
    Yes, this Erickson Big Bed Junior Load Extender, part # EM07605, has a 350-lb load capacity. It mounts to an existing 2-inch trailer hitch receiver. To secure the Load Extender to your hitch, you will need Pin and Clip, part # PC3, if you do not already have one.
    view full answer...
  • Recommended Method to Carry 2 Kayaks on 2004 Chevrolet Silverado 1500
    If your 2004 Chevrolet Silverado 1500 has a 2-inch front OR rear hitch that is available to use for your kayaks then I can recommend more cost-effective option, a load support bar like the Erickson Big Bed Junior Load Extender # EM07605. This fits a 2-inch hitch and allows for vertical adjustment to match your cab height. With this in place you can then use either a roof rack and rack-mount kayak carrier on the roof of the cab, or for the most cost-effective option a foam block type carrier...
    view full answer...
  • Weight Capacity of the Erickson Big Bed Junior Load Extender # EM07605
    If the steel tubes weigh 140 lbs all together then I would at least try to seperate them on the driver and passenger sides of the roof rack on your 2017 Honda CR-V. The best option for weight displacement would be to put them evenly across the width of your roof rack but that can be a little difficult. Make sure that the load is 140 total and not each. Should the steel tubes weigh 140 lbs each then you will not be able to carry them on the roof rack of your CR-V as that is 560 lbs. The...
    view full answer...
  • Will The Erickson Big Bed Junior Load Extender Clear The Spare Tire On My Jeep Wrangler
    The distance from the center of the hitch pin hole to the closest edge of the Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs. part # EM07605, is 11". If this distance is greater than the distance from the center of the hitch pin hole to the furthest edge of your spare tire, you will not have any issues. I have included a video review link below.
    view full answer...
  • How To Transport Kayaks On 2014 Silverado 3500 With 5th Wheel Trailer
    I have a possible solution for you, but there are not any ladder racks available that will allow you to use a 5th wheel trailer. Also, I do not recommend modifying an over-the-cab ladder rack as this would compromise its structural integrity. Since you don't want to clamp on a roof rack, I recommend looking into the Malone Deluxe Kayak Carrier with Tie-Downs - Foam Block Style - 18" # MPG152. This is an economical option for carrying a kayak; the foam block gets secured to your naked roof...
    view full answer...
  • Can the Erickson Big Bed Junior Load Extender # EM07605 Be Used Tall Like a Ladder Rack
    Yes, the Erickson Big Bed Junior Load Extender # EM07605 can be used either way. It can be used low for like a bed extender or high similar to a ladder rack. I attached pictures of both setup for you to check out plus a review video.
    view full answer...
    Image 1 for Image 2 for
  • Best Way to Carry 9ft. Long Whitewater Kayaks Utilizing the Hitch on an RV
    I want to lead this answer by saying, most racks aren't rated for use on RVs/Motorhomes because of the additional stress that is put on them with the extra movement that occurs on the backs of these vehicles- it's much different when attached to a passenger vehicle. There are kayak carriers that mount on your hitch, but they will only work with pickup trucks since they're typically only meant to hold one end of the kayak; the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar...
    view full answer...
  • Recommended Load Extender to Match Roof Line on Wagon
    The Yakima LongArm Truck Bed Load Extender part # Y01149 is our best out of the box option for matching the roof line on a wagon as it can be adjusted to one of the following heights. Low Bar Heights - 40 in, 37 in, 27 1/2 in, 14 1/4 in Mid Bar Heights- 41 3/8 in, 38 1/4 in, 28 in, 15 1/4 in High Bar Heights- 42 3/4 in, 39 1/2 in, 29 in, 15 3/4 in If this won't work for you, your only other option would be to go with something like the Erickson Big Bed Junior Load Extender for Truck...
    view full answer...
  • Recommended Suspension Enhancements For A 2013 Thor Challenger 37KT Class A Motorhome
    Having worked in our installation department I can say that the most preferred suspension enhancement for a Class A motorhome is definitely SumoSprings. They provide a much softer progression to give you support without sacrificing ride quality. The best part of these springs is that they are completely maintenance free so you won't have to do anything else once they're installed. For the front of your 2013 Thor Challenger 38KT I recommend the SumoSprings Rebel Custom Helper Springs #...
    view full answer...
  • Does the Erickson Hitch Mounted Load Extender, # EM07605 Come With Straps
    The Erickson Big Bed Junior Hitch Mounted Load Extender, # EM07605, does not comes with the straps you see in the pictures. If you look at some of the pictures of just the extender, you will see two loops, one on each end, of the T part of the extender. You could run safety cables, rope, or hooks through these to help secure the cargo. The other straps are attached in the adjustments holes for the cross bar. You could also wrap a strap around each side of the cross bar to stabilize the...
    view full answer...
  • Big Ben Junior Load Extender Distance From Hitch Pin in Horizontal and Vertical Position
    When the Erickson Big Bed Junior Load Extender part # EM07605 is used in the vertical position it extends out 11 inches from the center of the hitch pin hole out to the upright mast of the rack. This is the dimension you are looking for. When it's in the horizontal position the extension is 4 feet from the hitch pin.
    view full answer...
  • Can the Erickson Big Bed Load Extender Be Used As a Roof Extender
    The Erickson Big Bed Load Extender part # EM07600 is a bed extender only. That said, we have plenty of options which are both a bed extender and roof extender like the Erickson Big Bed Junior part # EM07605 or the Malone Axis Truck Bed and Roof Load Extender part # MPG907.
    view full answer...
  • Hitch Mounted Upright and Paddleboard Carrier Recommendation for a 2003 Chevy Tahoe
    The Erickson Big Bed Junior Load Extender # EM07605 that you referenced can basically fit any vehicle with a 2 inch hitch like your 2003 Chevy Tahoe. Due to the crossbar design of the rack you would basically just be able to strap the boards to the bar since it doesn't use a standard crossbar. A better option would be the Rhino-Rack T-Load part # RTL002 which uses a standard aero crossbar that would allow a roof carrier to fit. The Thule SUP Taxi Stand-Up Paddleboard Carrier # TH810001...
    view full answer...
  • Parts Needed for Transporting 2 14-Foot Kayaks on 2010 Toyota Tacoma with Factory Roof Rack
    We can get you set for hauling your two 14-foot kayaks on your Tacoma. A hitch-mounted load support system like the Erickson # EM07605 is the way to go. Since you already have a roof rack on the truck's cab you'll simply insert the extender into a 2-inch hitch, either a rear-mounted hitch or a front-mounted one like # 31313. If you need tie-down straps to secure the kayaks you might consider 4-piece ratcheting strap set # EM31352 from Erickson. You can also add two Foam Kayak Blocks...
    view full answer...
  • Compatibility of Erickson Load Extender EM07605 with 2-Inch Hitch on 2016 Nissan Frontier
    The Erickson Big Bed Junior Load Extender # EM07605, will fit a 2-inch hitch receiver like those offered for your 2016 Frontier. All such hitches are shown on the linked page.
    view full answer...
  • Adarac Pro Series Truck Rack Height And Canoe Carrier Options
    Per the manufacturer, the Adarac Pro Series Custom Truck Bed Ladder Rack # A4000964 has the following height dimensions. "Height above the box rail: 24 in. for mid-size, 26 in. for full size and 27 in. for Super Duty trucks. Load dividers sit an additional 3 in. above cross bars. Cross bars are 72 in. L x 1 1/2 in. W x 1 1/2 in. H" Additional options to consider if the sole purpose here is to transport your canoe include the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar...
    view full answer...


< Previous
123. . .4



Do you have a question about this Truck Bed Extender?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Aidan B
Video by:
Aidan B
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Hayden R
Test Fit:
Hayden R
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Mary K
Written by:
Mary K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.