Malone Axis Truck Bed and Roof Load Extender with Load Roller - 2" Hitches - 375 lbs
(152 reviews)
Price: $221.91
Malone Axis Truck Bed and Roof Load Extender with Load Roller - 2" Hitches - 375 lbs
Retail:$239.95
Our Price: $221.91
You Save: $18.04
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that are ready to ship
- All Info
- Reviews (152)
- Q & A (0)
- Photos
Malone Truck Bed Extender
- Hitch Load Extender
- Adjustable Height
- Adjustable Width
- Malone
- Steel
- 28 - 48 Inch Wide
- Black
Transport your heavy cargo easier with this truck bed and roof load extender. Adjustable height and width allows you to transport different size cargo. Heavy-duty load roller with rubber coated surface prevents scuffs and makes loading cargo easier.
Features:
- Stabilize and transport long or heavy cargo in your truck bed safely
- Adjustable height and width allows you to transport oversize cargo
- Vertical position creates rear of vehicle load bar
- Horizontal position extends the bed of a truck
- Heavy-duty load roller creates stability while loading your truck
- Rubber coated surface prevents scuffs and scratches
- Integrated side arms help contain load and prevent movement
- Anti-wobble bracket reduces movement and noise
- Powder coated steel construction resists corrosion
- Fits 2" x 2" trailer hitch receivers
- Includes load straps, ratchet tie-downs and safety flag
Specs:
- Dimensions:
- Length: 53"
- Width: 28" to 48"
- Height: 55-1/2" to 62-1/2"
- Top of receiver tube to top of crossbar height: 13" to 20"
- Load roller length: 42"
- Load capacity: 375 lb
- Weight: 40 lb
- Limited lifetime warranty
MPG917 Malone Axis Truck Bed and Roof Load Extender with Load Roller - 2" Hitches - 375 lbs
Item # MAL32VR
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Alternate product found
Customer Reviews
Malone Axis Truck Bed and Roof Load Extender with Load Roller - 2" Hitches - 375 lbs - MAL32VR
Average Customer Rating: 4.7 out of 5 stars (152 Customer Reviews)
Transport your heavy cargo easier with this truck bed and roof load extender. Adjustable height and width allows you to transport different size cargo. Heavy-duty load roller with rubber coated surface prevents scuffs and makes loading cargo easier.by: Francis08/21/2022
This is how I turned this into 5 star product: Wings are too loose in the T Bar for the roller to stay level and turn freely. I shimmed the wings with washers and used bolts to make everything snug.I used bolts wherever it called for lock pins. My sole purpose is to load my kayak into the truck. It seems more secure against theft when the truck is left in the parking area.
If they fix the wing issue I would give a 5 star review.
by: David 04/29/2024
Worked well for carrying ladders.
Worked OK for carrying a canoe.
The roller is very helpful.
by: Darren09/12/2023
The roller doesn't work properly, does not roll even when i put my kayak on it. The 2 sides that turn up are very rough and scuffs anything you haul. Also, needs to have some eyelets for tie downs.
Jenny N.
9/19/2023
I do know that the roller is available as a separate item a part # MAL97AR on the site.
by: Chuck 10/25/2023
Heavy duty,quality hardware,everything fits,easy assembly.Replaces a trailer, no more problems with wiring, bearings,tires.Easy load and unload of canoe or kayak.
by: Butch 09/08/2023
It's great. works just like I need it too. Quick shipping. Love doing business with Etrailer.
by: Gregg 09/06/2023
Excellent heavy duty product. Just what I wanted to carry my canoe, boat, or lumber.
by: Max07/29/2022
Solid piece of equipment! I loaded up 2 Hobie sit on top kayaks in the small bed of my pickup (5 1/2 ft), and the test drive went great! No rattling or movement after utilizing all 4 of the tie downs provided. The smaller diameter ratcheted lines easily fit through the scuppers, and the other regular cam straps worked well for tying down the sterns to the “goal posts” and hitch safery chain loops along side the receiver. I’m really happy with Malone products. I also love the 6 kayak rack in my side yard.
by: Grant 01/22/2023
Have used this bed extender for transporting my kayak and it works well!! Definitely recommend this product
by: Fletch08/28/2022
This solved all my problems loading my large 14' kayak in the back of my truck. It allows 1 person to load and unload with ease, plus it protects the hull from scratches that a normal bed extender causes. The roller makes all the difference in the world!
by: Harold 12/07/2022
Very nice product well built easy installation!Every thing as advertised very happy!Another great product from strainer also delivered a day earlier than expected!
by: Karl03/12/2022
Although it’s 25 degrees out today, the coldest day of March here in Michigan, and the box arrived yesterday, I’m thrilled to have it. And thanks to the folks at etrailer who kept me updated and in the loop the whole time! Great customer service work!
by: Leland07/12/2022
Works great, use it for ladders, lumber, and 12ft aluminum boat
by: Jared 10/03/2022
Good product. Promptly shipped.
by: Erwin 08/18/2022
Erwin
8/19/2023
Excellent
by: Caroline 08/04/2022
Perfect for my husband and his work loa d!
by: Chaplain03/10/2022
Fit and finish is good. Totally meets the needs to cary two kayaks on a short bed truck.
by: Timothy07/18/2021
it's ok will get the job done
by: Zemmy06/10/2023
Great.
by: Gary 09/05/2022
by: Cliff 09/01/2022
by: David 09/01/2022
by: Celia08/17/2022
by: Francis 02/08/2024
by: Byam08/16/2022
by: Robert03/10/2022
25
151
Show More Reviews
See what our Experts say about this Malone Truck Bed Extender
- Does The Axis Load Roller Extend In And Out On The Malone Truck Bed And Roof Load ExtenderThe Malone Axis Load Roller for Malone Truck Bed and Roof Load Extender - 42" Long, part # MAL52VR, that comes with the Malone Axis Truck Bed and Roof Load Extender with Load Roller, part # MAL32VR, is fixed in length. It does not extend in and out. You will have to remove this when the extender is at a length less than 42". I have included a product description link and a video review link below.
view full answer... - Recommendation for Roof Rack and Truck Bed Loader Extension for KayakI recommend going with the Malone Axis Truck Bed and Roof Load Extender with Load Roller # MAL32VR because it can be used both as a roof rack or truck bed extender and it comes with a loader that not only helps with loading/unloading but it means you don't need a separate pad for your boat. When used in conjunction with your 2014 Honda CR-V you won't be able to open up your rear hatch but that's the case with any roof load extender - they sit too close for you to open up the hatch. If...
view full answer... - Can Malone Hitch Extender MAL32VR Angle Back Like Rhino Rack T-LoadThe Malone Load Extender part # MAL32VR that you referenced does not have ability to angle back like the Rhino Rack T-Load part # RTL002 has so your best option would be to go with the Rhino Rack.
view full answer... - Diameter and Weight Capacity of Malone Truck Bed Extender Roller # MAL52VRThe roller part # MAL52VR is 2 inch in diameter and has a 375 lb capacity when used in the upright carrier part # MAL32VR.
view full answer... - Load Assist for Loading Canoe On Malone TradeSport Truck Bed Ladder RackThe Malone Axis Truck Bed and Roof Load Extender with Load Roller # MAL32VR will allow you to more easily load your canoe on the Malone TradeSport Truck Bed Ladder Rack # MAL55VR. This roller also acts as an extension to provide a more stable platform for holding the canoe. It can also be used with other long loads as a bed extender.
view full answer... - Longest Truck Bed Extended for Hauling Longer Load in Truck BedThe Malone Axis Truck Bed and Roof Load Extender part # MAL32VR will provide an extension of 53" when measured from the center of the hitch pin to the load bar when used in the horizontal position. I can't say whether this is enough support for your particular load but I can say it's the longest extension we offer. I'd also advise you to check with local state officials for regulations on oversized loads while traveling.
view full answer... - Is there Any Drilling Required to Install the Malone Axis Load Roller # MAL52VR?No, there is no drilling required to install any component of the Malone Axis Truck Bed and Roof Load Extender with Load Roller - 2" Hitches # MAL32VR or just the Malone Axis Load Roller for Malone Truck Bed and Roof Load Extender - 42" Long # MAL52VR. I went ahead and attached a video that shows the pre-drilled holes on the uprights to install the rollers at timestamp 13:30.
view full answer... - Carrying 19 Foot Canoe on Yakima Overhaul HD Ladder Rack on 2021 Toyota TacomaIt depends on how you're installing it! I installed two versions of the Yakima Overhaul HD on a 2021 Toyota Tacoma with a 5' bed. The OverHaul HD is always my favorite recommendation since it's a super solid ladder rack that looks and works perfectly on the Tacoma. The version that mounts to the utility tracks # Y01151-5868 has a maximum crossbar spread of 40". You can see that measurement around the 3:20 minute mark in the video I attached below. For the version that installs onto tonneau...
view full answer... - How to Carry a 98-LB Kayak on a 2012 GMC Yukon XL DenaliFor a 2012 GMC Yukon XL Denali, Yakima makes a great roof rack system. I recommend the HD bars, part # Y01156. They are heavy-duty bars capable of handling your kayak. To mount them to your tracks, you will need the SkyLine Towers, part # Y53TR, along with the HD Bar SL Adapter, part # Y03541, and the Landing Pad 20, part # Y00246. The total system can handle 165 pounds, but check your owner's manual to ensure your roof can handle that much. Since your kayak is so long, using the Malone...
view full answer... - Can The Malone Axis Extender Be Used To Help Support A Kayak On A Roof Rack Of A Jeep GladiatorThe Malone Axis Truck Bed and Roof Load Extender with Load Roller # MAL32VR has multiple height settings to allow it to be both a bed extender or roof rack extension. If you tilt the extender up at the connection point closest to the trailer hitch on your Gladiator then it will sit closer to roof rack height. There's also multiple different heights settings for the other end as well if you remove the pin and clip and slide it up to the desired height, allowing it to match up with your roof...
view full answer... - Will Malone Axis Truck Bed and Roof Load Extender Work for Kayak in Back Hatch on 2015 Honda CR-VIt's probably not the best way to transport a kayak on a 2015 Honda CR-V but it's also not the worst. The Malone Axis Truck Bed and Roof Load Extender with Load Roller part # MAL32VR should work fine for what you're wanting although there's going to be more wear and tear on your vehicle sliding the kayak in and out each time. If you can budget a bit more you can get a much better setup hauling the kayak on the roof using a combo of the Rhino-Rack Vortex Aero Crossbars System composed...
view full answer... - Recommended Kayak Carrier for 2020 Mazda CX-5The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
view full answer...
Do you have a question about this Truck Bed Extender?
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Joshua S
Edited by:
Daron K
Written by:
Matthew E
Video by:
John S
Installed by:
Evangeline M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Francis
8/22/2023
Love it