MaxxAir FanMate RV and Trailer Roof Vent Cover - 26-1/2" x 18-1/8" x 10-1/4" - Black
(383 reviews)
Price: $71.13
In Stock
MaxxAir FanMate RV and Trailer Roof Vent Cover - 26-1/2" x 18-1/8" x 10-1/4" - Black
Item # MA00-955002
Retail:$93.17
Our Price: $71.13
You Save: 24%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (383)
- Q & A (0)
- Photos
- Used (1)
MAXXAIR RV Vents and Fans - MA00-955002
- Vent Cover
- Roof Vent
- 18-1/8W x 26-1/2L Inch
- Black
- MAXXAIR
- Plastic
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.
Features:
- Roof vent cover for your RV or camper enables you to open the vent and operate the fan in any weather
- Allows air to circulate at all times, even when you're away or sleeping
- Keeps rainwater from entering and damaging RV interior
- Prevents heat buildup
- Designed for use with high-powered, high-speed fans
- Including MaxxFan Plus vents and certain MaxxFan Deluxe, Fan-Tastic Vent, and Shurflow vents
- Tall cover offers more roof vent lid clearance than other MaxxAir vent covers
- Wide vent area on the back of the cover maximizes airflow
- Less airflow restriction than standard vent covers
- Angled louvers allow smoke, odors, and stale air to escape
- EZClip pins make it simple to open or remove the cover for roof vent maintenance - no tools needed
- To open, pull pins out of the cover
- To close, slide pins in and push them up to lock in place
- Durable, high-density polyethylene construction is UV resistant
- Translucent material lets some light through
- Sleek, aerodynamic design reduces wind resistance
- Simple installation over roof vent with no need to drill into the roof of your RV or trailer
- No drilling required for installation on MaxxFan and MaxxFan Plus roof vents
- Mounts on frame of roof vent with included hardware
- Add-on bug screen (sold separately) keeps out insects and debris
- Black color
- Made in the USA
Specs:
- Application: designed to fit over most standard 14" x 14" roof vents
- Designed specifically to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs
- Can be used with high-powered, high-speed fans
- Overall dimensions: 26-1/2" long x 18-1/8" wide x 10-1/4" tall
- Inside dimensions: 25" long x 16-3/4" wide x 9-1/2" tall
- Vent area dimensions: 15-1/2" wide x 10-1/4" tall
- 6-Year limited warranty
Note: Some vents may not open fully when used with this vent cover. If opened 50% or more, the vent will still achieve maximum airflow.
Designed to work with high-powered roof vents, the FanMate cover offers superior rain protection so that the vent can be opened and the fan can be operated in any weather. The FanMate has a wide vent area that maximizes airflow, preventing heat from building up inside your RV or trailer. EZClip pins make it simple to open or remove the cover for roof vent maintenance. And no drilling is required to install the cover over a MaxxFan or MaxxFan Plus vent.
Designed for High-Powered Vents
This FanMate cover is designed to work with any roof vent that has a high-powered, high-speed fan, including MaxxFan Plus vents and certain MaxxFan Deluxe, Fan-Tastic Vent, and Shurflow vents. The FanMate is also taller than other MaxxAir vent covers so that it can provide increased lid clearance, which allows you to open the dome of your roof vent more.
The wide, louvered vent area at the back of the FanMate means that the cover provides more airflow in and out of your RV or trailer than standard covers. The angled louvers allow smoke, odors, and stale air to escape while keeping rain and debris out.
EZClips Simplify Opening
This FanMate vent cover comes with 4 EZClip pins. These pins enable you to easily open or remove the cover. When the pins are removed from one side, the opposite side acts as a hinge, allowing you unobstructed access to your roof vent for cleaning and maintenance. To secure the cover closed, slide the pins back into the cover and push them up to lock them in place.
Installation
The FanMate vent cover is specifically designed for installation on newer-model MaxxFan and MaxxFan Plus roof vents. No drilling or tools are required. The integrated mounting brackets on the FanMate perfectly align with the mounting tabs that are molded onto the flange of the roof vent. To install, fit the cover over the roof vent. Then slide the included EZClip pins through the tabs and rotate them up to secure the cover in place.
If you are installing this cover over an older-model MaxxFan roof vent without mounting tabs, no drilling is required and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with the stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
If you're installing this FanMate cover over any other roof vent, then drilling into the frame of the roof vent may be required. Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.
Durable Construction
This vent cover is constructed of durable, high-density polyethylene. Special additives help ensure that the material can resist the negative effects of UV rays. And the cover is translucent so that some natural light can shine through.
00-955002 Max Air Fan Mate Camper Roof Vent Rain Cover - Model 955 - Black
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
MaxxAir FanMate RV and Trailer Roof Vent Cover - 26-1/2" x 18-1/8" x 10-1/4" - Black - MA00-955002
Average Customer Rating: 4.7 out of 5 stars (383 Customer Reviews)
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.by: Thomas05/27/2023
This item was not package well at all scratched up the top of it and was bent on the corner, put it out in the sun to straighten it up. Unfortunately the order took 13 working days to arrive it sat in the UPS warehouse for 8 days claimed they did have enough drivers, I had to talk to them and etrailer folks sever times to get the shipment delivered, I guess when you live 100 miles from the warehouse they will take there time. On a side note there was a cargo slide and 3 other items on this shipment. not very happy with T-Force I think etrailer should look for a different delivery service Other than that it worked fine. The only reason for 3 star is packaging and shipping when you pay $XX for a plastic item is should be wrapped up in bubble wrap a least it was stuffed in a box, nothing else in it. Wow.
by: Mark10/25/2022
Tammie P came thru like the true professional. Told her my problem with first MaxAir II from another outfit not fitting my Winnebago exhausts vent...was too small and could not open.....Tammie went above and beyound researching til she found THE ONE she guaranteed would fit....and it sure did....like a charm. She was knowledgeable of the product and was very patient with me. Send ground and arrived as promised (just wish it had not sat the weekend in Atlanta). Easy to assemble and then install. Thanks Tammie
Mark
10/26/2023
Working as it should, keeping debris and rain out allowing for fan operation in inclement weather...love it
Mike L.
11/12/2023
@Mark We're happy to hear that!!
Mark
11/12/2023
sold the rig in July 2023 and it was still working like it should.
by: Gerald 03/23/2024
Great product and easy to install.. one year in and no problems. Highly recommend these vent covers .
by: Robert 04/25/2024
Good product replacement fast service
by: Christopher 09/09/2023
These work great and were relatively easy to install. I made the mistake of buying these, thinking I had MaxxAir fans in my RV. I actually had Dometic fans, and although the covers still fit, the covers are about 1/2" too low to allow the Domestic fan lid to fully open. Another 1/2" in height and I would have given these 5 stars for being flexible enough to use on either maxAir or Domestic fans.
by: James09/13/2023
Good design and look. Fairly easy install. Not as tall as I'd like but, the tallest I could find. Extremely difficult to install additional bug screen. The frame of the screen is taller than the grill. Was initially worried about breaking it but, I got it to work.
by: James 04/17/2024
easy to install.
by: Gordon 10/28/2023
As advertised. Perfect fit and quick easy installation.
by: Dennis03/17/2022
the vent cover came on time and undamaged. i recommend reading the instructions so you don't make the same mistake as i did. once i followed the well done directions it went together perfectly and fit on maxair fan just right. so far so good. i only gave it 4 stars because i just got it.
Dennis
3/18/2023
I have used this cover full time all throughout west central US and Canada rock springs Lethbridge this winter very windy locations. I have had to park this winter backend to the prevailing winds not recommend. I was afraid twice when the winds exceeded 50mph but no problems so 5 stars after a year
by: Eric 07/26/2023
I would give etrailer 5 stars. The product was as described and packaged well.
I originally had a problem with the timing of the delivery. Their customer service called to explain what happened and make sure I was happy. That is something I did not expect. Etrailer has excellent customer service.
by: Stacy07/28/2022
We are a mobile rv repair service and one of our customers requested we put these over his new fan vents to protect his purchase. They installed like a dream. Easy quick installation and we have another happy customer.
by: Anthony04/30/2022
Fit perfectly, came sooner than expected at a great price. Great customer service as always. I always shop at e-trailer when looking for stuff for the RV.
Anthony
5/1/2023
still great. much better than the factory installed one.
by: Charlie 03/30/2024
Easy online ordering, Fast service and accurate product listings.
by: Joseph07/28/2023
Installation was super easy. I have been using these for over a year now without any issues. I would recommend these to anyone seeking a similar solution.
by: Chris 08/22/2023
Easy to install and does block some light in the bedroom.
by: Mike 07/14/2023
This cover is as described but needs to be cleaned because the was a roll of butyl tape in with the package and got stuck on the cover. Tape should have been in it's own package if being sent in the same box.
by: Rv Tech08/02/2023
One of the few products these days that is easy to put together and installs in seconds, granted you have the max air fan with factory installation tabs.
by: Kevin 04/21/2023
Easiest installation of anything on the RV! Was a simple four clip install - after I installed the fan. Excellent Shipping from E-trailer - super fast and well packaged
by: Fred 11/30/2023
Perfect fit!
by: Kirsten03/07/2022
Nice and sturdy, love the low-profile d esign.
Kirsten
3/8/2023
Still in great shape and super sturdy. Love being able to keep the vent open and not worrying about rain.
by: Eric 05/26/2023
I’ve purchased several thousand dollars of product from E-Trailer over the past several years. Always on time,always a quality product! Keep it up,you guys rock!
by: George 05/04/2023
Order was shipped fast the MaxxAir and repair tape were in perfect condition.
by: Wayne 10/19/2023
We haven’t had the chance to install them yet, but the order was fast and exactly what we ordered, as usual!
by: Mark02/09/2023
Product is good, but warped out of shape due to the way etrailer shipped it. The box they use is probably okay for one, but two stacked together, no, to skinny. Received with the cover warped and scratched. It is mounted, but definitely not bug tight.
25
384
Show More Reviews
See what our Experts say about this MAXXAIR RV Vents and Fans
- Recommended Trailer Roof Vent Cover For a MaxxFan 4301kThank you for including the label for your vent fan. For your MaxxFan 4301k, I recommend the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001. This cover will fit your vent and is designed to work with the fan in your 4301k. This will allow you to leave your vent open and run the fan even in the rain. You can also leave the vent open when you travel to help keep the trailer cooler and expel any stale air from inside. The cover is also available in smoke and black. - # MA00-955003...
view full answer...
- Help With MaxxAir MaxxFans Allowing Water to Get Inside Camper During Strong StormI have seen where very strong winds will flex the lid on a MaxxFan # MA00-04002K and allow some rain to get in during severe storms. The way to resolve this is by adding a cover to the vent which will help prevent the strong winds and rain from getting in. We have the FanMate in Smoke # MA00-955003, Black # MA00-955002 and White # MA00-955001 which allow you to easily remove the cover to service the fan as well. There really is no way to seal the lid any better on the roof as all the...
view full answer... - Vent Cover Recommendation for a MaxxAir 4301K Roof VentIf your MaxxAir 4301K vent has the same clip openings on the base as the pictured MaxxAir MaxxFan Mini Roof Vent MA00-04301M then I recommend using the MaxxAir FanMate which comes in the following colors: - Black # MA00-955002 - White # MA00-955001 I wasn't able to find any photos of the 4301K model so if yours looks different than the one in the attached photo let me know and I'll be happy to help you find the right vent cover!
view full answer...
- Will The MaxxAir FanMate Cover Fit On A MaxxAir MaxxFan Plus 00-04900KThe MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002 will fit your MaxxAir 00-04900K, but it will not allow the lid to fully open. This is a clearance issue that is the same for every other RV roof vent on the market. Manufacturers will not build these covers taller than an RV air conditioner would sit to avoid hitting anything. The manufacturers have stated that it will not affect the ability of the vent or cause issues with any lift arm motors so there's nothing to worry about.
view full answer... - Roof Vent Cover To Keep Snow Off Of MaxxAir MaxxFan Deluxe Roof VentWe do offer a cover that will keep snow from getting on the lid of your MaxxAir MaxxFan Deluxe Roof Vent # MA00-07500K. You will need the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002.
view full answer... - FanMate Fan Cover for MA00-04500K MaxxFan Powered RV Roof VentWe certainly do, it's available in black as part # MA00-955002 or smoke as part # MA00-955003. Both are compatible with the # MA00-04500K MaxxFan Plus RV roof vent you'd looked at. You might also be intereste in the # MA00-955202 bug screen to keep the creepy crawly critters out. I've linked to some installation videos that you might find helpful.
view full answer... - Recommended Maxxfan Vent Rain CoverIf you have a high powered/high speed Maxxfan, then you would use the MaxxAir FanMate RV and Trailer Roof Vent Cover - 25" x 18-1/8" x 10-1/4" - Black # MA00-955002, Smoke # MA00-955003, or White # MA00-955001.
view full answer... - Roof Vent Cover For A MaxxFan Model 4951KSCFor your Maxxair Model 4951KSC, you can use the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002. Even though this cover only has 10-1/4" of interior height, your MaxxFan will sense the cover when auto-opening, and stop opening, that way you don't burn out your motor and damage anything.
view full answer... - MaxxAir Trailer Roof Vent Cover With Bug Screen Recommendation Sure thing! Take a look at the: -MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002 with the bug screen # MA00-955202. This setup is black in color similar to # MA26JR, but will also allow for installation of the bug screen # MA00-955202. Additionally, this cover will fit over most standard 14" x 14" roof vents and will also fit the 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs.
view full answer... - Recommended MaxxAir Trailer Fan Compatible With FanMate Vent CoverThe pin in place rain cover you are referring to is the MaxxAir FanMate, and that cover is compatible with MaxxFan Plus fans. So what I recommend for a compatible fan with the best air movement is a 10-speed fan: - MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed # MA00-04500K The MaxxFan Plus # MA00-04500K is 10 speeds like I mentioned so you can choose the power of the air movement, and importantly, it is also reversible which means you can not only...
view full answer... - Will MaxxAir FanMate RV and Trailer Roof Vent Cover Fit a MaxxAir MaxxFan Model 4401KThanks for reaching out, Jerry! Yes, the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002 will fit your MaxxAir MaxxFan Model 4401K perfectly with the EZClip pins like what you see in the linked video.
view full answer... - Rain Cover for MaxxFan Roof Vent # MA00A04301KYes, the MaxxAir FanMate Rain Cover # MA00-955002 referenced in your question will work perfectly with your MaxxFan Roof Vent # MA00A04301K. This will provide extra rain protection and it will install by using the molded mounting tabs located on the flange of your vent. These tabs are designed specifically to align with the integrated brackets on this cover. I have attached a short video demonstration that you can also check out.
view full answer... - Recommended Roof Vent Covers for a Trailer with Automatic Open Roof VentThe best roof vents we offer for your trailer are going to be the MaxxAir FanMate RV and Trailer Roof Vent Covers part # MA00-955002 for black, part # MA00-955003 for smoke, or part # MA00-955001 for white. The reason for this is because they have the tallest inside clearance measurements of 9-1/2". These will work just fine for your two standard roof vents but for the electric open roof vent, you will need to take a bit of caution. Judging from the photo it looks like it might not fit...
view full answer...
- Optional Bug Screen for MaxxAir FanMate Rain Cover # MA00-955002The optional bug screen is # MA00-955202 for the MaxxAir FanMate Rain Cover # MA00-955002. I have linked a video review for you.
view full answer... - Options for Roof Vent Cover on MaxxAir MaxxFan Mini Roof VentFor the MaxxAir MaxxFan Mini Roof Vent, # MA00-04301M, I suggest the MaxxAir FanMate RV and Trailer Roof Vent Cover, # MA00-955001 for white or # MA00-955003 for smoke or, # MA00-955002 for black. This is designed specifically to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs and for use with high-powered fans. Don't forget the Bug Screen for MaxxAir FanMate Roof Vent Covers, # MA00-955203 (smoke) and # MA00-955202 (black). Please note the linked product...
view full answer... - Will Vent Cover Allow Vent To Open 100%?This is a common question about this (and other) vent covers. None of the covers are tall enough for a vent lid to open 100%. However, most, including the Fan-Tastic # FVU1500WH, will open most of the way and allow 100% of air flow produced by the fan. The tallest vent cover we offer is the MaxxAir # MA00-955001 in white, or # MA00-955002 in black. You might also consider the MaxxFan Deluxe Roof Vent w/ 12V Fan part # MA00-07000K which is a fan with a built in cover. It's downward facing...
view full answer... - Roof Vent Cover for Maxxair Maxxfan on RV RoofFor your Maxxair Maxxfan you'd want the part # MA00-955002 for a roof vent cover.
view full answer... - Roof Sealant for MaxxFan Install Plus Roof Vent CoverTo seal around your new roof fan I would use the Alpha Systems # AL98KV Self-Leveling Sealant. To cover a MaxxFan I would use the MaxxAir # MA00-955002 in black or the # MA00-955001 in white roof vent covers. These attach fast when installing on a MaxxAir fan. There is an optional MaxxAir # MA00-955202 bug screen, but you have a screen inside and this mess will further reduce air flow in my opinion. I have attached a video demonstrating the installation.
view full answer... - 2016 Winnebago Travado MAxxFan Deluxe Replacement Cover and Vent Cover to go Over it.The Replacement Rain Shield for MaxxFan Deluxe Roof Vent part # MA05-30520 is what you want to replace the damaged cover you currently have. As for an additional cover to go over it the MaxxAir FanMate RV and Trailer Roof Vent Cover part # MA00-955002 is the one to use but I do not believe it will work with your A/C unit being that close to the vent itself.
view full answer... - Smaller Roof Vent Cover For A Basic Dometic Roof Vent The majority of fan covers like the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen # CAM40443 are designed to fit a variety of roof vents, so they may run a tad bit large and that is unavoidable. However, if you purchased something like the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002, that may explain the extra largeness of it, as it designed specifically to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs. This roof...
view full answer... - Recommended MaxxAir MaxxFan Plus Vent CoverFor your MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-04500K, the MaxxAir FanMate Rain Cover is your best fit for fully functionality. These come in 3 colors: Smoke # MA00-955003 White # MA00-955001 Black # MA00-955002 This will allow your vent to fully open and not come in contact with the cover as they are designed for compatibility.
view full answer... - MaxxAir Vent Cover Compatible with Factory Installed Anchor PointsThe MaxxAir FanMate Rain Cover in Black # MA00-955002, smoke # MA00-955003, or white # MA00-955001 are confirmed to fit the rounded factory mounting points like you see on the attached photo. If you have the flat mounting anchor points like in the other photo, then the MaxxAir II RV and Enclosed Trailer Roof Vent Cover - Black # MA86JR will work great.
view full answer...
- MaxxFan Roof Vent With A Brushless MotorThe MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White Item # MA00-07000K has a brush motor. The MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White # MA00A04301K however does have a brushless motor. This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects...
view full answer... - Roof Vent Cover Recommendation for Standard Roof Vent on Rockwood RVI recommend checking out the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002 for your application. This is designed to fit specifically to MaxxFan and MaxxFan Plus roof vents without drilling but it's also compatible with pretty much every other roof vent when using the included mounting hardware. Attached is a review video for you to check out. If you let me know what brand and model roof vent you have I can see if we have a specific vent cover that fits.
view full answer...
Do you have a question about this RV Vents and Fan?
Used Items Available
Condition: Surface Scratches
Notes: Item has a couple scratches and scuffs on the top. Otherwise new and unused.
Info for this part was:
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Adam Y
Updated by:
Tim N
Written by:
Jacob W
Test Fit:
Shane H
Test Fit:
David F
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
5/31/2023
When it comes to a freight shipment, it will take longer then regular UPS shipments. I am sorry this shipment was delayed and for the damage to the cover. I will have our Customer Service team reach out to you.