Roof Vent Cover For A MaxxFan Model 4951KSC

Question

Question:

I have the standard 14x14 roof vents, Maxxair model 4951ksc, the vents is controlled inside with a electric switch. the vent only opens all the way which measures around 12-13inch outside. Which of the easy clip vents will work. its on a 2022 momentum 376ths.

asked by: Jim R

1

Helpful Expert Reply:

For your Maxxair Model 4951KSC, you can use the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002.

Even though this cover only has 10-1/4" of interior height, your MaxxFan will sense the cover when auto-opening, and stop opening, that way you don't burn out your motor and damage anything.

expert reply by: Bryce D

1

Answer 1

I am afraid we do not carry the exact model fan 00-04951KSCX that you are looking for. We do have the MaxxAir #MA00-04751KSX which is a very similar MaxxFan Plus Roof Vent. This will be a suitable replacement for your vent, if you are looking to…

view full answer...

Answer 2

For your Dometic Duo-Therm 57915.622 I recommend checking out the: -Advent Air RV Air Conditioner #ACM135. This is a direct replacement for your current unit, has a 13.5K Btu per hour heating capacity, and will plug into your existing thermostat.

view full answer...

Answer 3

Since Atwood is no longer in the landing gear business it is basically impossible (unfortunately) to get just a replacement leg. The part number that you gave me actually is a document that shows the various parts for Atwood landing gear, but…

view full answer...

Answer 4

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 5

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 6

This question comes up pretty often but when we've spoken with our roof vent manufacturers they've told us that the lid will stop trying to open if it encounters resistance so the lid will still open far enough to function.

view full answer...

Answer 7

For your Maxxair Maxxfan you'd want the part #MA00-955002 for a roof vent cover.

view full answer...

Answer 8

I took a look at the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 that you mentioned and it's actually going to be a fit for the Lippert 1621 and 1621 HD 5th-wheel pin boxes, and not your Leand 7920, however I do have another…

view full answer...

Answer 9

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 10

The optional bug screen is #MA00-955202 for the MaxxAir FanMate Rain Cover #MA00-955002. I have linked a video review for you.

view full answer...

Answer 11

No the MAXX AIR II Vent Cover #MA86JR that you referenced does not come with a bug screen built into it. Just the screen is not available as it does not separate.

view full answer...

Roof Vent Cover For A MaxxFan Model 4951KSC

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching