Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
(603 reviews)
Price: $138.28
In Stock
Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
Item # LC432682
Retail:$236.94
Our Price: $138.28
You Save: $98.66
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (603)
- Q & A (0)
- Photos
- Used (2)
Lippert RV Steps - LC432682
- Towable Camper
- Pull-Out Step
- 2 Steps
- No Ground Contact
- 7 Inch Drop/Rise
- 24 Inch Wide Step
- 25-1/2 Inch Wide
- Steel
- Lippert
This 8-1/4" deep, double pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.
Features:
- Manually operated RV steps make it easy to get into and out of your motor home
- Simply pull steps out for use and position back in place for travel
- Non-skid and slip-resistant step design
- Tread tape provides sure footing
- Water channels and drain holes help to keep rain from pooling
- Grab handle eases use and keeps hands clear of moving parts
- Black powder coated steel is sturdy and rust resistant
- Easy bolt-on or weld-on installation
- Mounts to RV frame in same manner as original step
Specs:
- Entry height: 21-1/2" - 24-1/2"
- Step dimensions: 24-1/4" wide x 8-1/4" deep
- Mounting bracket dimensions: 25-1/2" wide x 9-3/4" tall x 12" deep
- Drop/Rise: 7"
- Weight capacity: 300 lbs
- 1-Year warranty
Will Lippert Pull-Out Steps Work for You?
Pull-out steps are typically installed on travel trailers. The pull-out steps from Lippert are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 25-1/2" wide and 12" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 25-1/2" wide to 28" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 9" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays entry height measurements in the first column. If you determined you need a 25-1/2" mounting bracket, the step part numbers with that width are in the second column. If you determined you need a 25-3/4" mounting bracket, the step part numbers with that width are in the third column. The steps for 27-1/2" mounting bracket widths are in the fourth column, and the steps for 28" mounting bracket widths are in the fifth column. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Entry Height | 25-1/2" Mounting Bracket Width | 25-3/4" Mounting Bracket Width | 27-1/2" Mounting Bracket Width | 28" Mounting Bracket Width |
|---|---|---|---|---|
| 14-1/4" - 17-1/4" | Not available | LC432678 | Not available | Not available |
| 21-1/2" - 24-1/2" | LC432682 | Not available | Not available | Not available |
| 24-1/2" - 27-1/2" | Not available | Not available | LC432687 | Not available |
| 31" - 34" | Not available | Not available | LC432696, LC432690 | Not available |
| 36-3/4" - 39-3/4" | Not available | Not available | Not available | LC432698 |
How Do You Install the Steps?
To install the steps:
- Make sure the camper is level on flat ground
- Lift the steps into the mounting space and prop into place
- If needed, mark the mounting holes on the camper and drill
-Set aside steps before drilling
- If needed, install the outriggers
- Align step mounting holes and secure in place with bolts and flange lock nuts
-Make sure the bracket is backed up fully against the I-beam on the chassis
-Hardware not included
- Tighten hardware until snug
- Make sure assembly is sitting square and level
- Torque the hardware to 20 ft-lbs
432682 Lippert Components (LCI) Double Radius Entry Step
Similar to Hickory Springs 952240RFXWAC1, 95224EXTALC1, and 982240RFXWC1
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs - LC432682
Average Customer Rating: 4.8 out of 5 stars (603 Customer Reviews)
This 8-1/4" deep, double pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.by: Mary 05/12/2023
Delivered on time. Had to adjust the back brackets because the holes did not match. Overall it looks like a quality product and is now on the trailer.
by: Paul K02/27/2023
The new set of dual steps looks great-- i was re-fitting my single step on a Salem Forest 2002- with a new set of steps-- It is your product on the trailer form the factory marginally. The bolt patters is a bit different so I will have to drill the attachment plate to the new holes in the new set of steps. It woudl be nice to include cut out drilling pattern to go along with a the steps. Otherwise very happy with this set of steps an the retrofitting.
Paul K.
2/29/2024
The steps are working out just fine. Happy with their use. The installation and product did not come with instructions. a Re drill pattern woudl have been nice. I had to hold it up and mark the one drill hole and then go to Lowes and get new stainless carriage insulated bolts. overall the lower step seems a bit weak- Im considering purchasing accompanying hinged supports that fold down when the steps are down for added support. If i woudl suggest a change in production make the lower step thinker metal- so it doesnt feel so flimsy.
Mike L.
2/29/2024
@PaulK We'll pass that along to the folks at Lippert!
by: D. Funk05/17/2023
A little more work than I expected to install, but if you need an extra step, it’s worth it. Nice and sturdy product. A few light scuffs right out of the box, but the paint does seem thick and durable.
Went from a single 16” step up to an easier 9” then only 5” after. Really needed it for my wife after her recent back surgery, and it should be easier for my son once he starts walking.
The extra work had me drill the “outriggers” because this set was 1/2” wider than my factory set. I’d have to guess my factory set is some nonstandard brand. Trailer is a 15’ Forest River Wolfpup 16BHS.
by: Kirsten02/14/2023
Love this pull out step! Replaced our bulky steps that fold up inside the trailer (and track dirt and get in the way) with this handy little step. It's super-sturdy and easy to collapse and pull back out. Had them on for a year now and no rust or corrosion even though camper is parked outside.
by: James03/04/2023
Original step to 2016 23RB Jayco Jayflight broke. Bought this step to replace. Installation was perfect with no issues. Took about 10 minutes. All mounting holes of the new step aligned to original trailer brackets with no issues. Even was able to use the original hardware. This newer step is definitely better built than the original. Looks good!
by: Steven 12/20/2023
These steps are a perfect replacement for the original steel steps on our2006 Safari Airstream trailer. They bolt in without modification to the steps or the trailer.
by: Airstream Replacement10/10/2023
Replaced the steps on my 2015 20 ‘FB flying cloud airstream. EXACT fit ! Fast shipping. Great communication
by: Tzar Igor10/19/2023
Fits perfectly on our Lance 1685 travel trailer after removing the damaged steps. Removing the damaged steps was 95% of the work since cutting huck bolts with a hack saw in a cramped space is a PITB. The original steps were damaged and bent after we snagged them several times dragging our trailer over rough terrain (they were folded up, but still hang too low).
by: Tim04/16/2022
These steps were very simple to install. They are good quality, feel and look sturdy. These replaced steps that were broken on one side. Good deal for the price. Their customers ordering and service was great.
Tim
4/17/2023
They still continue to work well for me.
by: Don10/09/2023
Great product, less than an hour to install both front and rear doors.
by: Jim W09/04/2023
It was easy to find exactly what I needed on eTrailer.com. As usual, the price was as good or better than anywhere else. The stairs arrived on time and they fit my Kodiak 186E perfectly, using the same bolt holes as the old stairs. Easy to install if you have a floor jack or jack stands to hold them in place while you put the carriage bolts in. Simpler design than the old stairs. I like the grab handles underneath.
by: Bill N04/19/2019
I have a 2017 RPod 180 and needed to change the one step to two steps after my wife’s knee replacement this past month. This part seemed to match closer to the current 25 7/8” width of the existing step. These steps are 25 1/2” so needed a few washers to space out. I replaced the 3/8” carriage bolt from 1” long to 1 1/2” long on one side. Reused the original on the other side. To fit this in the space I had to notch the steps at the back to fit around the frame beam. No impact on function. The steps were not fitting up to the current intended notch so I added another notch to lock them in the new position. I set the steps all the way up against the frame. This minimized the reduction in ground clearance as well as reducing the top step rise. It did require drilling new holes in the original supports. Ground clearance is ~9”. Was 10”.
by: Mike10/11/2023
Well made, simple install, although a floor jack is recommended to install.
by: David06/27/2020
Great fit works as described very fast shipping
Will purchase futher parts from etrailer
David
6/28/2021
Great no rust steps are looking as new as when delivered
by: Vicki 07/14/2023
We had difficulty installing all four bolts necessary on the steps. By standing on our heads and working upside down, we were finally able to get them in place. We used a bottle, jack and a piece of wood to help hold the steps in place while we positioned the bolts correctly before tightening.
by: C. Moore08/03/2023
Super fast shipping, very easy to find what I needed, my husband (not super handy) put it on with minimal swearing. It would have cost us 4 times as much to take it somewhere and have the stair repaired. Will certainly use etrailer again. Stair was damaged when we drove into a puddle hiding a HUGE pothole. Thanks for the outstanding product/service.
by: Glenn 09/14/2023
I needed different set of steps.Easter to get into my camper.the steps work good as we speek.so for so good.
by: Paula 07/18/2023
Bought these for my 2015 Forest River travel trailer. Excellent ship time, received in a few days. They were a little snug when installing but after the installation was complete were perfect. They seem very sturdy and well made.
by: Michael 02/21/2024
Just what I needed. I needed to shim both sides but it wasn’t an issue. Thanks!
by: Tom 08/25/2022
This item is being installed in a unique type of configuration and photos will be comming later as the camper and truck are out for paint. I think it wll be a first time istallation.
Tom
8/29/2023
Works and fits well very good product !!!
by: Richard 02/11/2024
Easy to install. Very strong and sturdy. Doesn't move when being used!
by: Rick09/06/2023
Stairs came on time and packaged well. Very easy installation and took about half hour.
by: Charles 07/31/2023
good solid steps
by: Jim 06/18/2023
Two steps are exactly what I was looking for for my small trailer
by: Craig 06/20/2023
Bolted right to keystone passport trailer
Fast shipping
Great to do business with
25
602
Show More Reviews
See what our Experts say about this Lippert RV Steps
- Is There a Folding Double Step That is 24-1/4 Wide x 8-1/4 DeepThere is a folding double step that has the same 24-1/4 inch wide x 8-1/4 inch dimensions as the Lippert Manual Pull-Out Step for RVs - Single # LC432678; the step you are looking for is the following: - Lippert Manual Pull-Out Step for RVs - Double # LC432682 I have added a link below to a video review for you to check out as well if you'd like to take a look.
view full answer... - Recommendation For 3-Step Unit That Fits 25 1/4" Mount On 2018 Forest River Flagstaff Camper I contacted the manufacturers of steps and unfortunately no one has a 3-Step option that fits your 25-1/4 inch mount on your 2018 Forest River at this time. Most 3-Step options have different mount sizes with 27-1/2 inch being the more common sizing. I have attached a link to our 3-Step inventory department. I do have a 3-step scissor option by Torklift that is Item # TLA8103 that is close but it's mounting dimensions are 25-7/16 inch wide by 12 inch deep. Additional information...
view full answer... - Manual Replacement for Lippert Kwikee Electric StepsFor replacing your Lippert Kwikee Electric Steps I suggest the Lippert Manual Pull-Out Step for RV's, # LC432682. This step is very similar to the Kwikee steps currently however, they will mount slightly different. These will probably require you to drill a few holes as finding a direct replacement with matching mounting holes is probably not possible. These steps have built in water channels and anti-skid tread strips. They have a 300 lb. weight capacity and come with a one year warranty. Please...
view full answer... - Recommended Replacement Steps For 2017 Forest River Sandstorm 27I can absolutely recommend a set of replacement steps for your 2017 Forest River Sandstorm 27 but you will need to do a quick measurement of your entry height to confirm the correct model as we unfortunately do not have a way of checking the entry height on your RV. I recommend the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear which you will need # TLA8104 if your entry height is between 32-1/2" - 44", # TLA8103 if your entry height is between 25-1/2" - 36", or # TLA8102 if...
view full answer...
- Is There a 3 Step RV Pull Out Step that Can Replace LC432682There are 3 step pull out kits similar to the # LC432682 that you referenced but they are wider across the board so the exact mounting hardware you are using now won't work. The part # LC432690 would be a great solution for what you have but it's 27-1/2 inches wide and what you have now is 2 inches narrower. For new brackets you'd also want the part # LC301704.
view full answer... - Can Lippert Manual Pull-Out RV Steps Be Added To A 2022 Coachmen Apex Nano Off-Grid 194BHSSince the Coachmen Apex Nano Off-Grid 194BHS is designed with fold-down steps instead of the traditional pull-out steps like you're looking at you would have build a mounting bracket for the steps to mount onto. Outriggers # LC301704 could be used but you need to make a solid connection to the frame otherwise there's a good chance the steps could fall off as you using them. You'll most likely want to contact a local fabricator and have them weld the mounting brackets on to ensure your...
view full answer... - Mounting Bracket Dimensions of Manual Pull-Out StepThe Manual Pull-Out Step for RVs - Double # LC432682 has mounting holes that are about 24" x 7" and although there are not any with a 14" x 7" pattern, you can still use this step. In order to do so you have a couple of choices. The first would be to weld the steps onto your RV while the other option would be to use Lippert Outriggers for Manual RV Steps # LC301704. You would need Mounting Hardware # LC118155-72 to attach the steps to the Outriggers.
view full answer... - How to Find the Correct Replacement RV Steps for a 2022 Forest River R-PodBased off of my research, it looks like your 2022 Forest River R-Pod 196 came equipped with a manual 2 step setup. To find the correct replacement, you'd need to just measure the mounting bracket width and pick out a set that you like the most. For instance, the Lippert Manual Pull-Out Step for RVs # LC432682 has a mounting bracket measurement of 25-1/2" wide x 9-3/4" tall x 12" deep, so if yours matches then this would work as a replacement. If you let me know what you have, I'd be...
view full answer... - Measurement of Bolt Pattern for Lippert Manual Pull-Out Step for RVs, # LC432682The Lippert Manual Pull-Out Step for RV's, # LC432682, as shown in the attached product review video, has a center-on-center hole measurement of 7" and 24".
view full answer... - Replacement RV Steps for 2015 Shasta Flyte Travel TrailerFrom the photos I've seen of your 2015 FR Shasta Flyte 215CK, it looks like you need a 2-step unit. To identify the correct replacement, you'll want to determine the width of the mounting base of your existing steps. If that base is about 27-1/2 inches, the Flexco # SMFP-2100 would be a good choice. If the base is around 25-1/2 inches in width, go with the Lippert # LC432682 or for a 23-5/8 inch mounting base width, use the Flexco # SMFP-2120. The CR Brophy # AS23 steps you referenced...
view full answer...
- Availability of Pull Out RV Steps That Are 25-1/4 Inches WideLippert components offers a 2 step unit with a 25-1/4 inch overall width, with the bolt hole spacing being 24 inches on center, side to side and 7 inches front to back on center. The part number is # LC432682.
view full answer... - Replacement Steps and Wheel Center Cap Plug For a 2023 Forest River R-Pod 171I really wish I had a way to see exactly what parts are installed on your 2023 Forest River R-Pod 171 but Forest River does not make the information public. Based on images of your camper it appears to have steps like the Lippert # LC432682 and I believe the Center Cap Plug # AM90081. If you can take some pictures and measurements for what you have I can verify if these are the correct parts or you will need something different.
view full answer... - Recommendation For Adding A Two Step Manual Step To 1989 Honey RVThe Lippert Manual Pull-Out Step for RVs - Double - 7" Drop/Rise - 24" Wide - Steel - 300 lbs # LC432682 are a great option for your 1989 Honey RV. I recommend using the Lippert Outriggers for Manual RV Steps # LC301704 to give more stability to the mounting of these steps. You can use the Mounting Hardware for Lippert Electric and Manual RV Steps # LC118155-72 for this installation.
view full answer... - Manual Replacement for Lippert Kwikee 32 Series Electric StepsThe best option to replace your Lippert Kwikee 32 Series Electric Steps would be to use the Lippert Manual Pull-Out Step for RVs part # LC432682. This step is very similar to the Kwikee steps you have now but will mount a little differently which may require you to drill a few holes but there will really be no way around this. These steps have built in water channels and anti-skid tread strips. They have a 300 lb weight capacity and come with a one year warranty. I have attached a review...
view full answer... - Converting from 1 Step to 2 Steps on Coachman Clipper TrailerI recommend going with our Lippert Manual Pull-Out Steps for RV - Double - 7" Drop/Rise - 24-1/4" Wide – Aluminum, Item # LC432682. This 2-step model provides two grip strips for sure footing, anodized aluminum rustproof step platforms, and a 7 inch drop/rise, which should be easier for your wife to climb. Our manual Lippert single steps all have 24x4 inch bolt hole patterns. Based on these dimensions and the information you provided, we are assuming your current Lippert step has the...
view full answer... - Are New Mounting Brackets Required to Install Double Step on RV in Place of Single StepThe single step RV steps do have smaller mounting dimensions so if you are wanting to go with a double step to replace what you have what you'd need is the Lippert Manual Pull-Out Steps # LC432682 which is a double step that has a foot plate that provides solid traction. Since the mounting brackets of your RV are going to be too small you'll need outriggers too to go with this as part # LC301704 and you'll be set.
view full answer... - Mounting Hole Spacing for Different Manual RV Steps for a 1999 Jayco 5th Wheel TrailerOn Lippert steps # LC432682 the mounting holes on the top are spaced 7 inches apart on center front to back and approximately 24-1/2 inches apart left to right. The same goes for # SMFP-2100. Steps # SMFP-2120 are a little more narrow at a hole spacing of 20-1/2 inches but still the same 7 inch measurement front to back.
view full answer... - Can 2-Step Lippert Steps Replace a Single Step on a 2017 Winnie 170SYou will need to go by the dimensions of steps # LC432682 to determine if they will fit your 2017 Winnie 170S. I have included some pictures showing various measurements to help you. The depth when folded up is going to be 13 inches. By the looks of your current set up there is enough space for these steps.
view full answer...
- Will Step Outriggers have to be Modified to Use Lippert Steps with Taller FrameOn Lippert steps # LC432682 from the top of the mounting surface to the top of the channel the top step slides in measures approximately 5-1/4 inches so it does appear that your outriggers are a little too long.
view full answer...
- Folding RV Step for Ford Transit T150 VanI suggest the Flexco Manual Pull-Out Step for RVs, # SMFP-1100. While we cannot confirm the fitment to your van as we have not attempted this type of mount, I can point out that the Lippert Outriggers for RV Steps, # LC301704 are available if needed. These can be either bolted or welded to the van.
view full answer... - Recommended Replacement Steps For Forest River Wildwood Travel TrailerYou will need to take a couple of quick measurements to see if the replacement steps we offer will work on your Forest River Trailer. One of the 2-step pull-out steps we offer is the Flexco Manual Pull-Out Steps, part # SMFP-2100. This has a retracted height of 9 inches and is designed to be mounted in a space that measures 27-5/8 inches wide x 12 inches deep. The steps are 24 inches wide. Per Lippert, the 2-step Lippert # LC432682 step will fit in the space that the single step was installed....
view full answer... - Replacement Manual Step for 2005 Jayco Greyhawk Class CWe do not have a database that tells us what steps are on your 2005 Jayco Greyhawk Class C, but the Lippert Manual Pull-Out Step for RVs # LC432682 are 24-1/4" wide, so as long as your door opening is around that size these would be a good option. These can either be welded or bolted onto your trailer frame, and they should be relatively easy to install. With that said, I recommend instead going with the SolidStep Manual Fold-Down Steps, which are a 2 step setup designed for entry heights...
view full answer... - Replacing A 25" wide RV StepYou are correct in that we do not offer a step that is exactly 25" wide. We very well may have a step that will replace yours. There are a wide variety of 24" wide steps available which may work. For example the Lippert manual pull out step # LC432682 has a 24-1/4" wide step and a 25-1/2" wide mounting bracket. If you are looking for a fold down step we have the Moryde # MR26RR. This has a 22-1/4" step and will fit doorways 23-3/4" to 26-1/4" wide. I really like these Moryde steps personally....
view full answer... - How to Determine Which Replacement Steps Will Work for a 2022 Forest River Rockwood FreedomHey Eric, so to find out if the Lippert Manual Pull Out Steps # LC432682 are going to work with your 2022 Forest River Rockwood Freedom Camper you're going to need to locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. These steps require a mounting space that is at least 25-1/2" wide and 12" deep. If it turns out you have more or less space beneath your doorway, then you'd need a different set that has bracket sizes ranging...
view full answer...
Do you have a question about this RV Step?
Used Items Available
Condition: Surface Scratches
Notes: Item has cosmetic scratches present.
Condition: Surface Scratches
Notes: small dents on front of steps, frame has slight bend, light surface scratches
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Halie H
Installed by:
Cole B
Written by:
Chelsea B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mary
5/13/2024
Still working great. I took a corner to close and bent them a little, but they still work fine.