Availability of Pull Out RV Steps That Are 25-1/4 Inches Wide
Question:
APEX 300 BHS trailer with 2 step entry, need three step entry for disabled wife and dont want to buy and store a separate aux step.
asked by: Ed B
0
Expert Reply:
Lippert components offers a 2 step unit with a 25-1/4 inch overall width, with the bolt hole spacing being 24 inches on center, side to side and 7 inches front to back on center. The part number is # LC432682.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 24 Inch Wide Step
- 25-1/2 Inch Wide
- 2 Steps
- 7 Inch Drop/Rise
- No Ground Contact
- Steel
- Lippert
more information >
Continue Researching
- Q&A: Is Etrailer Ball Mount As Good Of Quality As Draw-Tite Or Curt?
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: How to Measure for Motorhome Steps
- Q&A: Wiring configuration for Atwood GC6AA-10E Water Heater
- Q&A: Atwood GC6AA-10E Replacement Recommendation
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Can Wireless Backup Camera be Installed on Aluminum Trailer without Interference to Signal
- Q&A: Lithium Compatible Replacement Converter for a Progressive Dynamics 45w PD4045KA
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Q&A: Replacement Air Conditioner for Carrier Air V
- Article: Trailer Lighting Requirements
- Q&A: Can Trailer Axles Be Mounted Above and Below the Leaf Springs on a Trailer
- Article: 4 Reasons Not to Use RV Solar Power (And 4 Reasons You Should)