Lippert High-Speed Power Stabilizer Jack - White Switch Kit - 30" Lift
(364 reviews)
Price: $640.72
In Stock
Lippert High-Speed Power Stabilizer Jack - White Switch Kit - 30" Lift
Item # LC369774
Our Price: $640.72
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (364)
- Q & A (0)
- Photos
Lippert Camper Jacks - LC369774
- Fifth Wheel Camper
- RV Motorhome
- Travel Trailer
- Leveling Jacks
- Stabilizer Jacks
- Electric Jack
- 1 Jack
- 30 Inch Lift
- Lippert
- Bolt-On
- Steel
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. Durable steel construction with a powder coat finish to resist corrosion.
Features:
- Power stabilizer jacks provide an easy way to upgrad to power leveling
- New motor is 2x faster than previous versions
- Legs extend up to 30" for quick leveling
- New embossed legs add strength
- Automatically adjusts to the terrain so uneven ground is not a problem
- Motor indepently controls both legs for more control
- Switch kit allows you to easily retract and extend the jacks with the flip of a switch
- Heavy-gauge steel construction ensures durability
- Lighter weight than previous models
- Black powder coat finish stands up to the elements and resists corrosion
- Front and rear mounting applications available for maximum stability
Specs:
- Overall dimensions: 78" long x 20" wide x 4-3/4" tall
- Lift: 30"
- Motor: 12-volt DC
- Mounting hole spacing:
- 68-11/16" from center-hole to center-hole
- Includes a 6 amp auto-reset circuit breaker
- 1-Year limited warranty
369774 LCI Lippert Components High-Speed Power Stabilizer Jack - White Switch Kit - 30" Lift
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Did not fit
Customer Reviews
Lippert High-Speed Power Stabilizer Jack - White Switch Kit - 30" Lift - LC369774
Average Customer Rating: 4.7 out of 5 stars (362 Customer Reviews)
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. Durable steel construction with a powder coat finish to resist corrosion.by: Justin 05/02/2024
Easy to install and functioned perfectly. Customer has been utilizing it for a year and still raves about it.
Thank you
by: Mark03/09/2019
Pros: Works better than I anticipated. Looks great and has better ground clearance than the stock scissor-jack stabilizers.
Cons: Installation instructions/documentation weak or non-existent. If all of the instructions, wiring diagrams and documentation were in one place on the web page under a separate tab rather than having to dig through the reviews and the Q & A’s, I would have given this a 5 star rating.
I ordered the LCI Power Stabilizer Jacks with the white switch Kit (LC369774) because I wanted the switches mounted in the camper wall so they would be better protected than if they were mounted in the flimsy fender skirts of my camper. I also needed the bolt-on spacer kit (LC673594) for both the front and rear jacks to clear a propane line that runs along the length of the frame. Installation was relatively easy, although there are NO instructions on how to install the spacers kits; the video on etrailer.com was no help whatsoever with the installation. I bolted the jack mount brackets to the shorter side of the spacers using carriage bolts and flange nuts; the slotted holes in the spacers accepted the carriage bolts, aligned perfectly with the holes in the jack mounts, and allowed me to install them without having to try to fit a wrench inside. Then it was just a matter of drilling holes in the frame at the appropriate spacing for flange bolts/nuts through the slotted holes on the end of spacers. I was very pleased with how the switches and the switch compartments looked once installed. Again, though, it took lots of digging to find the wiring diagram and then the matrix for the switch wire colors, because the wires on the white switch are colored differently than the black switch that all of the diagrams show. Also, it states on the jack installation instruction sheet that the power must be a minimum of 10 gauge wire (AWG-10), but nowhere on the wiring diagram does it say anything about that. AWG-10 is a MUST because of the way current drops over a distance. In the case of my camper, it is a 30 foot run which requires that gauge of wire for 20 AMPs.
by: Rarebear05/02/2020
This stabilizer works very well. I replaced the original Lippert unit on my 2008 5th wheel as the parts I needed were no longer available. The original Lippert unit worked great until some idiot in a drunken stupor decided to move it with the stabilizer in the “down” position. I probably won’t do that again anytime soon. DOH!!!
Rarebear
5/3/2021
Still works perfect. Seriously, a great product!
by: Bill F08/28/2020
This unit works so much better than the previous unit originally installed on the trailer during its manufacturing. As its title states, it is high speed compared to the previous jack. It is self leveling, a big improvement over the older unit.
Bill F.
8/28/2021
Working great after a year. Highly recommend this product.
by: Larrys11/17/2017
The product is perfect. Added it to a fifth wheel that was a bit shaky with the Lippert 2.0 auto level system. Easily 90% better. Shipping errors from Lippert and a long back order time gap cost a star on the rating. When it finally arrived the white switch was black (no big deal, new install so I could just move to the skirt). It was also missing the weather guard switch box, which etrailer had Lippert ship to me at no charge. I had noted the black switch and was clear it was okay as long as the box was black as well. I had mounted the switch in the skirt (needed the jack) and would only need to enlarge the cutout and re-wire when the box came in. It arrived today, white of course to match the switch that was supposed to be white but arrived black. Silver lining is that the switch is far better than the old styles and is sealed, so I will leave as is.
by: Brian V08/25/2020
Excellent product. Arrived on time. Easy to install. The trailer I installed it on was a 2018 Cedar Creek Silverback 41.5 ft. The frame was at the products maximum width It did just fit and as a stabilizer jack worked well. Stopped the back of the trailer from moving. If the factory could make this unit a couple of inches wider that would be good. Like I said it does fit and works well.
by: Christopher10/20/2018
This was a replacement for our damaged rear stabilizer legs. Installation for me was 30 minutes; the holes lined up and only 2 connections required for my existing switch. My old stabilizer was a Lippert as well, but the motor on this one sounds healthier and seems slightly faster.
If you don’t already have a similar system, understand that this is not intended to lift or level your RV. Once you get it leveled, drop these legs to “plant” the bag and reduce wobbling and movement. I use manual scissor jacks to level. And always place this last when setting up and take them up first when closing up. I took my scissor jacks out before raising these legs the last time we moved and these are not strong enough to hold the weight of our large 5th wheel, so one of the legs and the frame buckled, hence the replacement.
by: Roy05/14/2019
Product just as advertised, works great and thanks for the quick shipping. Will continue to make etrailer my first choice when in need of parts.
Roy G.
5/15/2020
Still doing the job
by: John 05/01/2020
Ordered the rear electric jacks for my fifth wheel toy hauler on Saturday and they were delivered the following Tuesday !!! It took less than a hour to install them, They fit perfectly !! Most of that time was removing the old ones !! The only issue I had was that they only supplied 4 bolts to put the new jack up with and there were 4 holes per side. Was not comfortable with 2 bolts per side. Great company to deal with and I will continue to order parts for my fifth wheel in the future !! Nice job guys !!
by: Antonio05/14/2022
After using the 6k lbs for my 14k fifth wheel for a year, I can honestly say there are no issues or complaints. Wife is a travel nurse and we live in our trailer. It does an amazing job of stabilizing the rear end of the trailer.
by: Todd 08/29/2022
Jack worked well. Dimensions different than original even though I ordered by part number so I had to redrill frame etc…. To mount.
by: Don08/01/2018
This is a Great Stabilizer,well worth the money!Thanks for a Great Product!
Don
8/1/2019
Its Great
Don
8/1/2019
The Best,it really makes life easier and stabilizes the camper,Thanks
by: Bill 04/30/2021
I received it early. Thank you. I am unable to find a wiring diagram. I was told there would be one. The wiring to hook up the switch is very short. It is only one foot. I thought it would be at least 18 inches. I am putting this switch box on the out side of trailer. I do not want to spice the wire.
by: Robert 11/02/2021
I would have liked an option to select a black switch but I can use the old seitch
Robert
11/4/2022
The motor needs a bit more torque. Not as stable as I thought it would be
by: Virginia06/13/2018
Very pleased to order stabilizer for our fifth wheel while on the road and it arrived the third business day. WOW! The rep at eTrailer was well informed on product and understood quickly and I felt assured our product would be ordered and delivered quickly. On the road and able to get back on the road quickly was awesome. VRC
by: Jeffrey05/21/2018
This was the easiest install of a product that I have ever bought. It bolted right up to the brackets under my Cougar XLite 33RES with no problem. Hooked up the power and within 30 minutes I have working stabilizer. I will purchase another one for the back within the month. I cannot say enough about this experience.
by: Roy06/10/2021
I think this company has extra ordinary customer service i order this part which came damaged, package was damaged and parts missing I go follow up email to see my satisfaction i explained what happened and sent pictures a week later a bran new one was at my door Great service highly recommend them
by: Jack W.07/19/2018
Purchased as a replacement for another electric set. The new jacks operate differently and automatically adjust for uneven ground. Also operates much faster than the old one. Same mounting as old one.
by: Brad W08/06/2019
Replaced a damaged stabilizer with this new one. So much faster and quieter. Will replace the other one once needed with this one. As always fast shipping and in stock. Thank you
by: Josh03/03/2022
Product raises and lowers as promised. Very stable. Had to reach out to customer service and they were prompt and satisfying with the response. Will definitely order with e-trailer again.
by: Ernest01/19/2022
This was a direct replacement for the damaged jack. It was an easy bolt on unit and has been working great for several cycles.
by: Steve L01/07/2020
I bought this to replace one that was damaged when I forgot to raise it up before leaving the camp site. What an idiot! New one was easy to install by myself with a minimum of hand tools. Saved me a bundle.
by: Richard05/30/2019
Every aspect of this purchase was a great experience. The Lippert stabilizer I purchased was exactly as advertised and shipping was ahead of schedule.
by: Paul07/12/2018
Received product exactly as ordered. Nothing missing. No Damage. Shipping was free and product arrived in 3 days. Can't ask for better than that. Installed the part same day received, works perfectly. Etrailer always has great prices and the product I need. Will use them again if needed.
by: Lane10/05/2018
Amazing how fast these guys deliver. Product looks great and is exactly as described. Have yet to install it on the back of the trailer, but should work as expected.
25
362
Show More Reviews
See what our Experts say about this Lippert Camper Jacks
- Stand-Alone Powered RV Stabilizer for Front or Rear InstallationThe Lippert Ground Control jacks use Hall Effect motors that are meant to be used as part of that complete automatic leveling system but we do have powered jacks and powered stabilizers that can give you similar powered leveling. For instance Lippert makes their High-Speed Power Stabilizer Jack # LC369774. This kit includes a switching kit and gives you independent control of both legs. It also works well on uneven surfaces. Lift is as much as 30-inches and this unit can be used in front...
view full answer... - Recommended Electric Stabilizer Jacks for a 2008 Newmar X-aire Toy HaulerThe Lippert Components High-Speed Power Stabilizer Jack part # LC369774 should work just fine for your 2008 Newmar X-aire Toy Hauler. The only thing you need to check is that your frame rails are spaced apart accordingly for the mounts on the stabilizer which are 68-11/16" from center to center (left to right). If you have a different spacing that is between 48" and 80" then you can use the Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors part # UF39-941705 instead which would...
view full answer... - Replacement for Broken Lippert Stabilizer Jack Model 113407Thank you for the photo; you are going to need to replace your Lippert stabilizer jack 113407. The good news is we do carry the exact replacement, Lippert Components High-Speed Power Stabilizer Jack # LC369774.
view full answer...
- Recommended Replacement Electric Stabilizer For LCI Model 1917771 Stabilizer JacksI recommend replacing the entire jack assembly with the Lippert High-Speed Power Stabilizer Jack # LC369774. This stabilizer is capable of 30" of lift and collapses to 4-3/4" tall which helps reduce the risk of the jacks being damaged from road debris. The overall length of the stabilizers are 78" with the mounting holes being 68-11/16" from center-hole to center-hole. Included with the jack is a new switch with housing, mounting hardware and the auto reset circuit breaker. A Manual Crank...
view full answer...
- Troubleshooting A Lippert Stabilizer Jack That Is Binding Up When ExtendingThere are a couple of possibilities why your Lippert Stabilizer Jack 113407 is binding up and not functioning as intended. One possibility that is fairly common is your battery not having enough charge to properly operate the jacks. You'll want to take a multimeter # PT29ZR to your battery and ensure you're getting at least 12.5V. If you are not, I recommend charging your battery for at least a day and checking again. The next thing to check, that is also fairly common is wiring issues....
view full answer... - Correct Replacement Motor for Lippert Components High-Speed Power Stabilizer Jack 113407In order to find the correct replacement motor for a set of Lippert Components High-Speed Power Stabilizer Jacks like part # LC369774 you'll simply need to note the color of the support arms, if they are yellow use part # LC352338 but if they are black use part # LC138445.
view full answer... - Wiring For Lippert Components High-Speed Power Stabilizer JackI assume you are asking about wiring the switch of the Lippert Components High-Speed Power Stabilizer Jack # LC369774. For this, please refer to the accompanying cutout I added; your jack uses Switch # LC144214 so as the diagram makes clear, the black wire is retract, the green wire is extend, the white will likely be ground and red will then be power.
view full answer...
- Stabilization Jacks With At Least 28" of Extension The Ultra-Fab Ultra Scissor Jacks - 30" Lift # UF48-979031 will provide you with 30" of maximum extension. Collapsed these jacks are 4-3/4" tall and capable of stabilizing 6,500lbs. The Lippert Scissor Stabilizer Jacks with Handle # LC285344 are also 30" jacks. Collapsed these jacks are 4-1/4" tall and capable of stabilizing 10,000lbs. The Lippert High-Speed Power Stabilizer Jack # LC369774 is a electric powered option that has 30" of extension. This unit being one piece is 78" long...
view full answer... - Replacement Motor for Lippert Components High-Speed Power Stabilizer Jack LC369774Yes, we have a replacement motor for the Lippert Components High-Speed Power Stabilizer Jack # LC369774 that is on your Rockwood Ultra Lite travel trailer. The motor you can use is Replacement Motor # LC352338 which is shown in the linked video. I confirmed compatibility with Lippert.
view full answer... - Lippert Electric Stabilizer with Black or Brown SwitchWe have Lippert stabilizer jack # LC298707 which has a black switch and no mounting box but not a version of # LC369774 that has an alternate color mounting box.
view full answer... - Will Lippert Components High-Speed Power Stabilizer Jack # LC369774 Fit a 2011 Jayco PinnacleLippert Components High-Speed Power Stabilizer Jack # LC369774 has mounting holes spaced 68-11/16" from center-hole to center-hole from one mounting flange to the other. Provided that your 2011 Jayco Pinnacle can support this spacing then you can use it. We do not have a parts list for that trailer so measuring is the best way to determine fit.
view full answer...
- Recommended Replacement For A Lippert Stabilizer Jack # 113407The direct replacement for your Lippert Stabilizer Jack 113407 is the Lippert High-Speed Power Stabilizer Jack # LC369774.
view full answer... - Recommended Stabilizer Jacks for 2018 Forest River Shockwave Travel TrailerIt sounds like you are looking for stabilizer jacks for your 2018 Forest River Shockwave travel trailer. Landing gear is something you would typically find on a 5th wheel. If you are looking for some manual jacks for the rear then I recommend the Ultra-Fab Ultra Scissor Jacks # UF48-979002. If you're looking for electric stabilizers then I recommend the Lippert High-Speed Power Stabilizer Jack - White Switch Kit - 30" Lift # LC369774. This features legs that extend up to 30" for quick...
view full answer...
- Will Lippert Power Stabilizer Jack be Compatible with Car Hauler Application?The Lippert Components High-Speed Power Stabilizer Jack - 30" Lift # LC298707 can absolutely be used to stabilize your car hauler trailer to keep it as level as possible. You will want to chock your wheels to minimize trailer movement as the stabilizers are not intended for the front to back stabilization but they will stabilize side to side to keep your trailer floor level. For that stabilization I recommend the ONEstep chock # FA84-00-4000 and I've attached a video to assist. If you...
view full answer... - Replacement Motor for Older Lippert 369777 Stabilizer JackThanks for reaching out and the photo! It looks like you have the older Lippert 369777 stabilizer jack which was replaced by the Lippert Components High-Speed Power Stabilizer Jacks # LC298707 & # LC369774. Thankfully they all use the same replacement motor as part # LC352338 so you won't have to replace the entire assembly! I have attached a review video for you to check out.
view full answer...
- Wiring Diagram For Lippert Components High-Speed Power Stabilizer Jack With White SwitchI believe you are referring to the Lippert Components High-Speed Power Stabilizer Jack part # LC369774 that comes with the white switch part # LC144214. Lippert was not able to provide me a wiring diagram for the white switch but was able to give me the wiring functions. If you are looking at the back of the plug the wires coming out of the back left to right are white and red, green and black, red and white. The white red combo goes to extend function. The red white combo goes to the...
view full answer...
- Troubleshooting Stabilizing Jack That Will Not ExtendIf your stabilizing jack retracts but does not extend it could be something very simple like your battery is not charged enough to deliver the needed power, or it could be the switch is bad, so you will want to check the wiring on the switch to make sure there isn't some issue like a short. If you have the Lippert Components High-Speed Power Stabilizer Jack # LC369774 or # LC298707 and find the switch is the issue you can replace it with Replacement Electric Jack Switch with Harness for...
view full answer... - Does The Replacement Switch LC144214 Come With Wires Pre-Attached?Yes, your new white switch # LC144214 will come with the wires pre attached to the back. I have included a a wiring diagram below which will show you how to wire the new switch to the motor. We would generally use butt connectors, preferably heat shrink, to connect the wires.
view full answer...
- Solution for Needing Replacement Drive Coupler for Lippert Stabilizer Jack for RVFor the Lippert stabilizer jacks like the # LC369774 we do not have replacement motor drive couplers available. If you were in need of one the only solution would be an all new motor like with the part # LC352338.
view full answer... - Automatic Leveling System for 2019 Grand Design XLS 22RBE - Easy InstallationThe Lippert # LC369774 number that you referenced is an improved stabilizing system that includes motors to operate the stabilizers. These are typically installed in the back, as the front of the trailer is stabilized by the tongue jack. They are a significant improvement over manual scissor jacks. The Lippert # LC672136 Electric Ground Control leveling system that you referenced by name is a leveling system. The components basically take the place of your corner scissor jacks, and the...
view full answer... - Extension Limitation of Lippert High-Speed Power Stabilizer JackThe Lippert High-Speed Power Stabilizer Jack, # LC369774 does have a stop point to prevent from overextending the 30" of travel. Please keep in mind this is not intended to lift or level your camper but to stabilize an already leveled RV. For a unit that will level and and provide stabilization all in one, use the 4-Point Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote, # LC358590. Please note the linked product review and installation videos below...
view full answer... - Replacement Motor for Lippert Electric Stabilizer Jacks for Travel TrailersFor your 2011 Forest River Flagstaff V-Lite the stabilizer jack motor you are seeking is the C-800 Replacement Klauber Motor for Standard Lippert Components Electric Stabilizer Jacks # LC138445.
view full answer... - Replacement for Lippert PSX2 Stabilizer Jack 695602I do have an option for you but we don't carry the Lippert PSX2 Stabilizer Jack 695602. Instead, we carry the Lippert High-Speed Power Stabilizer Jack part # LC369774 for a white switch, or part # LC298707 for a black switch. These are very similar jacks to what you have now expect they have a single motor design. The footprint and mounting will be the same.
view full answer... - Is There A Solution For A Bent Or Broken Leg On A Lippert High-Speed Power Stabilizer JackThe wording in that answer page is a bit confusing. Essentially the legs are not replaceable on their own and you'd have to completely replace the entire entire stabilizer # LC369774 with another one. Lippert unfortunately likes to make a lot of jacks that are completely trashed if one small component breaks. If you would prefer to switch to a stabilizer that can also be used for leveling then you would need the Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors # UF39-941705...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Dustin K
Video by:
Zach D
Test Fit:
Randy B
Test Fit:
David F
Written by:
Shelly K
Updated by:
Brian T
Updated by:
Hannah L
Updated by:
Mike S
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mark R.
3/10/2020
1 Year Follow-up: The stabilizer jacks are great. We made a six-week, 22-stop, 8000-mile around-the-country trip and the jacks performed flawlessly. Setting up and breaking camp were completed easier and quicker. The only issue I have had is that the extend/retract switches will occasionally stick in the on position, so I just have to watch and make sure they turn back off. I would definitely recommend the jacks to anyone looking to make their camping experience easier.