Replacement Foot Assembly for Lippert Components Power Stabilizer Jacks - Qty 1

See what our Experts say about this Lippert Accessories and Parts

• Is There A Replacement Leg For Lippert Electric Stabilizer Jacks PSX1?
  The Electric Stabilizer Jack Support Arm # LC1134122 and Foot Assembly # LC157584 are the only replaceable parts for the legs on your Lippert PSX1 Stabilizer Assembly # LC298707. If you bent the leg itself you will need to replace the entire assembly.
  view full answer...
• Replacement Foot Pad for Lippert Stabilizer Jack 337199
  We have the correct replacement foot pads for your Lippert Stabilizer Jack 337199, but the ones you mentioned will not work with that stabilizer. Instead, the correct part is the Replacement Foot Assembly for Lippert Components Power Stabilizer Jacks # LC157584.
  view full answer...
• Using Larger Foot Plate on Lippert Stabilizer Jacks
  It can indeed be used if the jack leg can accommodate the 1-1/4 inch width beetween the mount ears as shown in the provided photo. If the leg is too wide to fit in between the ears, they might fit inside the leg is the inside of the leg is greater than 1-3/4 inches.
  view full answer...
  
• Replacement Foot for Lippert Powered Stabilizer
  For your Lippert powered stabilizer we have a replacement foot with the part # LC157584. The arm/leg that comes down that the foot attaches to is not available as a separate item.
  view full answer...
• What Size Tube Will The Lipper Replacement Foot Assembly Work With?
  I spoke with Lippert and they gave me the dimensions from the outside of the 2 mounting flanges on the Replacement Foot Assembly # LC157584 as 2-7/8"; so you'll need to use a 2-3/4" square tube to fit in between them and a 3" bolt. You could also use the Replacement Front Foot Pad # LC362486 which is for 2" x 2" tubes or the UltraFab # UF17-940006 which has 1-5/16" inner dimensions of the 2 mounting flanges.
  view full answer...
• Can Bent Leg On Lippert High-Speed Power Stabilizer Jack Be Replaced
  In regards to the Lippert High-Speed Power Stabilizer Jack part # LC369774, you can replace the support arms with part # LC1134122 and the foot assembly with part # LC157584. The legs themselves are not repairable, if either are bent then the entire unit would need to be replaced.
  view full answer...
• SnapPads For Lippert Powered Stabilizer Jacks With 6 Square Feet
  The SnapPad XTRA Square # SN99FR is the correct set of snap pads to fit the 6" Foot # LC157584 on the Lippert High-Speed Power Stabilizer Jack. This kit includes 4 pads or you can get them Individually # SN77FR if you only need one set or one get damaged.
  view full answer...
• Replacement Parts Available and Hardware Included With Lippert High-Speed Stabilizer Jack # LC369774
  The Lippert High-Speed Power Stabilizer Jack # LC369774 includes the following parts. 1- Stabilizer Jack Assembly 1- White Switch Housing # LC134025 1- Power Switch # LC144214 1- 6 Amp Auto Reset Breaker # LC134181 4- 3/8" Hex Head Mounting Bolts 4- 3/8" Hex Nuts The following replacement parts are also available for the Stabilizer Jack Assembly - Replacement Electric Stabilizer Jack Support Arm # LC1134122 - Replacement Electric RV Stabilizer Jack Motor # LC352338 - Replacement Foot...
  view full answer...
• Replacement Stabilizer Legs For Lippert Power Stabilizer
  On the Lippert High-Speed Power Stabilizer Jack 337199 it would appear that the only parts of the legs that are replaceable are the Electric Stabilizer Jack Support Arm # LC1134122 and the Foot Assembly # LC157584. If the black arms are buckled then the entire jack assembly will need to be replaced. Since the 337199 is no longer available you will need the Lippert High-Speed Power Stabilizer Jack # LC369774.
  view full answer...

Do you have a question about this Accessories and Part?