Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace 1 rear right leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at Lippert's replacement rear leg for the ground control three leveling system. These are available for either the left or the right for either your four point or six point leveling system. These jacks are going to be a direct replacement for your factory originals. So whether your jacks are worn out and no longer functioning from age, or if you had some sort of collision that's damaged them, these are a nice easy replacement. And you don't have to replace your entire system, just that particular damaged jack.The replacement jack only includes the jack, so you want to make sure that you save all of your mounting hardware to get your new one installed. On the six point replacement jack, the foot pad is made onto the jack.
However on the four point system replacement jack, the foot pad is removable, and the pin that holds it on does not come included. So you want to make sure that you maintained your pin from your original jack. If need be, you can purchase additional replacement pins here at etrailer.com.With these replacement jacks, you can have the comfort of knowing that they are factory original replacements, and they're going to bolt right up guaranteed. Our motor's burnt out on this one here, so we're going to need to replace it. We'll begin the replacement by disconnecting the electrical connectors.
So you're going to want to follow the leads from the motor, pull those down. You'll disconnect them by pressing on the release tab, and pulling them apart.Next you'll simply need to remove all the bolts that are holding it in place. On our particular unit here, we're going to be using a 19 millimeter socket and wrench to remove those. To get to the top ones, I recommend only removing them partially, leaving some of the nuts still threaded on to hold it in place because it is quite heavy.Now we've got them most of the way removed, you can support your jack and remove the rest of the hardware by hand. I like to just leave the bolts in there and just remove those with the jack.
We'll now set it down and get our replacement. An exact replacement for the factory originals, and it installs just in the reverse order of how we removed it. Now when you removed your old one, you want to remember which holes that you used because it does have a height adjustment with these holes. If you're questioning it, you can always take a peak at the other side because the other side is going to have the same distance as this side.With all of our bolts in place, we can tighten them back down using that 19 millimeter socket and wrench. Then torque it to the manufacturer's specifications.
Now we can plug in our electrical connectors. And you're all set, ready to go on your adventures again. And that completes our look at Lippert's replacement rear leg for the ground control three leveling system.
Average Customer Rating: 4.8 out of 5 stars (65 Customer Reviews)
Replace 1 rear right leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.This was an exact replacement for the one I severely bent by accident. Installation could not have been easier, should take about 15 minutes with the correct tools.
Lippert crew in my book are dedicated people that has a great deal of knowing how to help the public
It is very easy to install and it's ready, once you plug it in, no adjustment or reset. I would mined paying the extra though to get get the 4 bolts washers and nuts for the installation, glad I had the ones from the damage jack.
Easy fit & replacement
The new one had the motor mounted on the opposite side. No big deal, mine had to be removed to get to the bolts anyway. Perfect replacement. I raised mine up a few inches. The factory mounted them on the lowest position. Hopefully wount catch a curb again!!
Perfect bolt on replacement. Total replacement time was about 15 minutes. Easy to order, quick shipping.
The jack seemed to be a direct replacement. Electrical connections easy snap off and on. However, getting the nuts off was not easy. There are some access issues and mine were really on tight from the factory. I was having tires balanced by a local suspension shop. I had them change the cylinder. With breaker bars they had the nuts off quickly and the jack changes quickly as well. My system recognized that the jack was no longer broken and it worked fine.
I bought my 5th wheel hitch 4 years ago from etrailer and was completely satisfied with the hitch and advice I received. So ordering my leveling jack from etrailer wa a no Brainerd. Good price, fast shipping (for free) and great packaging. I installed it today and it works great.
Arrived really quick. Packaging to protect it was spot on. Bolted right on to the trailer, hooked up the electrical and it worked perfectly. No system reset, it just worked. The only thing i find odd is that a snapoer pin doesnt come with it. You get the leveler and the foot plate but no pin. Old pin was bent so had to buy a separate pin. Pleased oveerall. etrailer has thee best communication and they do take care of you. Thanks to all at etrailer!!
This stabilizing jack is an exact replacement for my forest river 5th wheel. It was shipped and delivered quickly. Installation was very easy taking about 10 minutes. My leveling system recognized the new part, I reset the error code and it just worked. Etrailer is a pleasant shopping experience, thanks!
The jack came well packed and with no damage. It was easy to install. George at etrailer kept me informed on the status of my order beginning with receiving my order to when it was shipped, and finally after it was delivered.
Don N.
12/28/2017
The replaced right-rear leveling jack is working great. After installing it,I had to view a Youtube video to get the central controller to recognize it.It would be helpful if Lippert replacement parts included instructions thatare necessary to make the part function properly as if it was installed atthe factory.Thanks for your email and the ability to provide feedback.
everything good
The part does not fit properly and is not compatible with the leveling system on our camping trailer.
Mike L.
1/28/2019
This item is meant as a replacement right rear leg for a Lippert Ground Control 3.0 electric leveling system, part # LC358590 or # LC675817. It will not be compatible with other systems.
Received my Lippert electric RR Jack in 4 days with free shipping. I have installed the jack, in about an hour. This was not etrailers fault, but the electrical connections were very, very suborn to get appart, and the 6 bolts had to use a breaker bar to get off. Took only about 10 minutes to reinstall the new jack. I will not be able to test the installation until I can get the trailer on level ground.
Quick shipping from etrailer. Product was used to replace a damaged leveler due to driver error. Would be helpful if the snapper pin was part of the leveling system
I was very pleased with the timely manner and the quality of people who I delt with at etrailer. The items I ordered were delivered on time and everything was as it should be. I installed the parts on my camper and now I'm back in business. Thanks
Easy bolt on replacement for broken jack. Total install time including resetting system less than 20 minutes.
Extremely Proud of how fast etrailer is... Damaged this on Friday, ordered LATE Friday and showed up on Tuesday already. Complete replacement of the one I damaged on 5th wheel.
Driver mistake. Bent my middle jack on passenger side of fifth wheel. Talked to John and he rush shipped item to me in time for Disneyworld trip with family. Installed and go to go.
Got part on time. Installed myself. It matches the OEM jack. Install and torque bolts, plug in. Works with the system as expected. No issues.
I received this product within a reasonable time and was able to install it within 20 minutes and everything worked perfectly thank you very much
Everything ok .the rite part ,the Jack fit well ,the computer excepted the Jack no problems so . Excellent delivery time line thank you. Great people on the service department.
[Thumbs up]
Fast shipping, product exactly what I needed. I will do business again with etrailer.com
I made the mistake of bending one of my stablizers at a service station. I call Tim and he fixed me up with this great product and excellant service. I would recommend this product and company to everyone.
Product as it showed. Came very quickly. Lori was outstanding. Big help and friendly. Would recommend to all. Love etrailer
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
7/8/2022
We do carry the snapper pins separately, part # LC225598.