Replacement Follow Leg for Venture 5th Wheel RV Landing Gear
(16 reviews)
Price: $372.00
In Stock
Replacement Follow Leg for Venture 5th Wheel RV Landing Gear
Item # LC119101
Retail:$586.18
Our Price: $372.00
You Save: $214.18
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (16)
- Q & A (0)
- Photos
Lippert Accessories and Parts - LC119101
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Lippert
Replaces the landing gear follow leg assembly for your Lippert Components Venture 5th Wheel RV landing gear. Mounts to the inside of the frame rail. Standard length.
Features:
- Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear
- Mounts to the inside of the frame rail
- Easy to install
- Includes snap pin
Specs:
- Length:
- Extended with drop leg: 68"
- Extended no drop leg: 52-1/4"
- Retracted: 32-3/4"
- Travel: 35-3/4"
- Drop leg length: 16"
119101 Replacement Follow Leg for Venture 5th Wheel RV Landing Gear
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Replacement Follow Leg for Venture 5th Wheel RV Landing Gear - LC119101
Average Customer Rating: 4.5 out of 5 stars (16 Customer Reviews)
Replaces the landing gear follow leg assembly for your Lippert Components Venture 5th Wheel RV landing gear. Mounts to the inside of the frame rail. Standard length.by: Brad03/07/2023
Installed on our 2012 Dutchmen Voltage exact replacement. Awesome fit. Original goal was to inspect and grease both the gear reduction and landing gear since they were working fine.
Due to significant wear and damage replaced legs instead. Gear reduction in great shape cleaned and greased. Highly recommend doing this before a failure on the road.
by: Wayne 08/06/2023
I have to save a bit to buy the other matching leg lol,great service
by: William11/02/2022
Manufacture did not do a very good job with the grease. Just put a big blob on the gears in the top and did not get it on all of the gears. This is one of the things that fail and need to be checked to make sure you can get as long a use as you can. etrailer was very good!
by: Rebecca 08/04/2023
Great,service,and delivery!!
by: Lamar 09/01/2022
Was delevered a day earlier than said looks like the right part only it does not have grease allimets like the other one has but I think it will work
by: Janice 11/07/2020
Got our drop leg jack in two days. Husband put it on in just a hour. We’re ready to go camping . Yea. Thanks to etrailer.
by: Jeff07/05/2021
Received parts quicker then estimated shipping dates. Had to change the shafts between the leading leg and the follow leg jack to make them mount correctly on my camper.
by: Michael 08/22/2020
I got hurt before I could install it, but if like the lead leg should work just great!
by: Brian 09/05/2022
Delivery was excellent. And fits like a glove.
by: Brian 10/13/2022
Very pleased. Received my order a day earlier than planned and everything was a perfect fit.
by: Jim 05/14/2021
Best experience I've had in a long time.
by: Cody 01/16/2023
by: Yohral09/16/2021
by: Steve11/19/2021
by: Benjamin 10/06/2022
by: Johnny 09/10/2021
16
16
See what our Experts say about this Lippert Accessories and Parts
- Replacement Landing Gear Lead and Follow Legs Venture 5th Wheel Lippert We have just the solution for you. Replacement Lead Leg for Venture 5th Wheel # LC119102 and Replacement Follow Leg for Venture 5th Wheel # LC119101. It has the same length and diameter outside leg 29.5" x 2.5" and inside leg as your current landing gear.
view full answer... - Difference Between Landing Gear Follow Leg Replacements # LC119101 and # LC179014There really isn't a difference between the # LC119101 and # LC179014. One is just listed for Venture landing gear sets and the other Lippert. They are both identical though.
view full answer... - Replacement Landing Gear Legs for Venture Landing Gear VMC900R-227194The landing gear set you have is a very popular set by the brand Venture, for a replacement lead leg you'd want the part # LC119102 or for a replacement follow leg you'd want the # LC119101. The lead leg is the leg that the landing gear handle attaches to and the follow leg is the one opposite of that.
view full answer... - Correct Replacement Lead Landing Gear Leg for a Lippert Venture Landing Gear I believe you're looking for the Replacement Lead Leg for Venture 5th Wheel RV Landing Gear # LC119102. This is going to replace the lead leg on your Lippert Venture landing gear which is typically found on the driver side. We also have the replacement follow leg # LC119101 should you need that as well. If you're needing something else feel free to come back and we'll take care of you.
view full answer... - Replacement Landing Gear Legs Identification For a 2004 Keystone Sprinter 5th Wheel CamperI have a way to help you identify which landing gear leg that you need as I cannot confirm your exact parts. It does appear that your landing gear was made by Venture on your 2004 Keystone Sprinter. The Replacement Follow Leg # LC119101 that is designed to replace the Venture landing gear can be identified with the following attributes. The black outer tube is 29-1/2" long, It will mount to the inside of the frame on your Sprinter and the top cap is a press in fit and not held in place...
view full answer... - Replacement Landing Gear Legs for Venture 900 Landing Gear The correct replacement for your Venture VMC900R RV landing gear are part # LC119102 for the lead leg or # LC119101 for the follow leg. These will be direct replacements for the current legs you've got.
view full answer...
- Replacement Lead and Follow Leg for Venture VMC900R Landing GearThe Venture VMC900R is a very common landing gear set so for replacement legs we know you need the part # LC119102 for the lead leg and # LC119101 for the follow leg.
view full answer... - Replacement Lead and Follow Legs For Venture VMC900R Landing GearThe Replacement Lead Leg # LC119102 will fit your Venture VMC900R landing gear. We also have the Follow Leg # LC119101 available if you wish to replace them both. The Leg # LC179013 you found is for LCI Power Landing Gear assemblies.
view full answer... - Replacement Follow Leg for 2010 Keysonte Montana Hickory With Venture Landing GearLippert was unable to identify exactly what you have based on part numbers, but I can still help you find the correct replacement. You will need to check and see where the landing gear is mounted and also measure the black outer tube on your existing leg. If the landing gear is mounted on the inside of the frame rail you need one of the following: -Replacement Follow Leg for Venture 5th Wheel RV Landing Gear # LC119101 (29-1/2" Measurement) -Replacement Follow Leg for Venture 5th Wheel...
view full answer... - Selecting The Correct Replacement Venture Landing Gear Follow Leg On a 2005 Thor Tahoe Transport We have a couple options for the Lippert replacement follow landing gear leg for your 2005 Thor Tahoe Transport 27WTB. To ensure you get the correct leg you will need to measure the length of your outer black portion of the leg. The Replacement Follow Leg # LC119101 has an outer tube length of 29-1/2". The Replacement Follow Leg # LC64PJ has an outer tube length of 33-1/2". Both of these legs will mount to the inside of the frame rail and have the press fit style caps.
view full answer...
- Replacement Landing Gear Lead Leg for Venture VMC900LAccording to our information you'll need the Replacement Lead Leg # LC119102 for your Venture VMC900L landing gear kit. If you end up needing the follow leg as well that can be found on our site as part # LC119101. Attached is a review video for you to check out.
view full answer... - Can a Lead Leg for Venture 5th Wheel Be Turned Into a Follow Leg?Because the two types of legs are oriented to be used on particular sides of the trailer, you're not going to be able to use a lead leg like the Replacement Lead Leg for Venture 5th Wheel Landing Gear # LC119102 as a follow leg. You may be possible to modify the leg and make it work, but I cannot recommend doing this. Because of this, you'll need to replace your follow leg with a specific matching follow leg for your landing gear system. The matching landing gear follow leg for the lead...
view full answer... - Is It Possible To Just Replace The Extended Sleeve For The Front Landing Gear Follow Leg? Typically you have to replace the entire Follow Leg for the landing gear. We do have a few different replacement legs below as this is currently the only way we carry the sleeve you are looking for is part of the entire leg. Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652 Replacement Follow Leg for Venture 5th Wheel RV Landing Gear # LC119101 Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" # LG-177201 While I have no way to look up your...
view full answer... - Replacement Jack Legs for Venture VMC900R Landing GearThe Venture VMC900R is a very common landing gear set so for replacement legs we know you need the part # LC119102 for the lead leg and # LC119101 for the follow leg. Since you are wanting to fix the issue as cost effective as possible I would recommend going with just the individual legs you need to replace.
view full answer... - Replacement Gearbox for Venture Landing Gear on 2010 Keystone Montana HickoryThe Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602 is the correct replacement for your Venture landing gear.
view full answer... - Which Replacement Venture Lead and Follow Landing Gear LegsYou could re-use your existing # LG-4 if you have that bottom attachment bracket relocated to the appropriate position. It would involve removing the existing bracket and having the bracket provided with the # LG-4 welded into place. If you'd prefer simply replacing the lead and follow legs you can use Lippert's # LC119102 which is the replacement Venture lead leg and # LC119101 for the follow leg. The legs would be compatible with your existing motor. Each leg has the 17-1/2 inch stop...
view full answer... - Replacement Landing Gear Legs for Venture Landing Gear Thanks for the pictures. You won't need to replace the entire landing gear set. For your Venture landing gear on your 2002 Forest River Cedar Creek Fifth Wheel you will want item # LC119102 for the lead leg or item # LC119101 for the follow leg. The Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies item # LC276602 you were looking at is the correct gear box.
view full answer...
- Replacement Landing Gear Choices For a 5TH Wheel Having Venture VMC900R Landing GearYou will need the Replacement Lead Leg # LC119102 and Follow Leg # LC119101 for your Venture landing gear VMC900R-340691 on your 5th wheel. Another option would be to upgrade to the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 which will allow you to control the left and right side jacks individually. This will help to make leveling your camper easier and ensuring the trailer raises evenly.
view full answer... - Replacement Lead and Follow Legs for Venture RV Landing GearFor your Venture VMC900R RV landing gear you'd want the part # LC119102 for the lead leg or # LC119101 for the follow leg. The lead leg is the one that has the jack handle on it and the follow leg is the one opposite of that.
view full answer... - Replacement Follow Leg For a 2010 Keystone Laredo 26RLS 5TH Wheel CamperIn previous interactions we have found the 2010 Keystone Laredo 5th wheels to use Venture VMC900 landing gear. This would give you the Replacement Follow Leg # LC119101. I do recommend verifying this is the correct leg for you by measuring your existing leg. You should have a retracted length of 32-3/4", you can check this on the Lead Leg # LC119102 if your follow leg cannot be operated.
view full answer...
- Replacement Lead and Follow Legs for Venture VMC900I would be happy to help you find replacement legs for your 5th wheel. You are going to want the Replacement Lead Leg item # LC119102 which will work well as a replacement for your Venture VMC900. Then for the matching follow leg you are going to want the Replacement Follow Leg for Venture Landing Gear item # LC119101.
view full answer... - Replacing Landing Gear Legs VMC900R-463417Yes the Venture VMC900R is a fairly common landing gear set. For the lead leg it will be # LC119102 and for the follow leg it is # LC119101. We do ship to Canada. All of our prices are USD and shipping fees will apply.
view full answer... - What Can Damage The Internal Gears Of My 5th Wheel Jack?Though I could not find anything about the T46059 repair kit you referenced, but odds are the jack isn't rated high enough for the weight of your trailer. Or there is more than just the gears that need to be replaced. What you will probably want to do is replace either the leg, or what may be a better idea, the whole system. For the leg, it will depend on if it is the lead or follow leg, but as the Lippert Venture Lead Leg Repair Kit # LC146059 is for the lead leg, you will need the Replacement...
view full answer...
- Landing Gear Follow Leg For Venture Landing GearYou will be able to use one of the Lippert follow legs to replace the follow leg on your Venture Landing Gear, but you will need to verify the length of the outer tube on your leg. If you have a 29-1/2" outer tube, you'll want to use the Replacement Follow Leg for Venture 5th Wheel Landing Gear # LC119101 . If you have a follow leg with a different sized outer tube, please let me know what size your legs are and I will find you an appropriate replacement.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Kathleen M
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brad
3/8/2024
Still working great. They are so quiet I cannot tell when they are operating.