Replacement Follow Leg For a 2010 Keystone Laredo 26RLS 5TH Wheel Camper

Question

Question:

Looking for a replacement landing gear follow leg for a 2010 keystone Laredo 26RLS 5th wheel. The pictures added our the lead leg that still works well.

asked by: Logan M

0

Expert Reply:

In previous interactions we have found the 2010 Keystone Laredo 5th wheels to use Venture VMC900 landing gear. This would give you the Replacement Follow Leg # LC119101. I do recommend verifying this is the correct leg for you by measuring your existing leg. You should have a retracted length of 32-3/4", you can check this on the Lead Leg # LC119102 if your follow leg cannot be operated.

expert reply by: Bud M

0

Lead Leg On 2010 Keystone Laredo 26RLS 5TH Wheel Camper
(click to enlarge)

Answer 1

There really isn't a difference between the #LC119101 and #LC179014. One is just listed for Venture landing gear sets and the other Lippert. They are both identical though.

view full answer...

Answer 2

I believe what you need for your 5th wheel is the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin #LC179013. This replacement leg measures 32" overall, has the same 15-1/2" inner, 17-1/2" outer…

view full answer...

Answer 3

We do not sell that specific piece you reference, however we do sell #LC179014 which replaces the leg and snap pin. You would need to make sure that the measurements match up with your current leg and the weight capacity is appropriate. As far as…

view full answer...

Answer 4

I have a way to help you identify which landing gear leg that you need as I cannot confirm your exact parts. It does appear that your landing gear was made by Venture on your 2004 Keystone Sprinter. The Replacement Follow Leg #LC119101 that is…

view full answer...

Answer 5

With the information I was able to find I suggest 5th Wheel RV Landing Gear Follow Leg #LC179014. I suggest confirming the measurements of this leg to ensure it is correct. The overall length of the retracted leg is 32" long and 2-1/2"…

view full answer...

Answer 6

I have attached a link to our selection of follow landing gear legs for you to filter through. You will want to replace your current landing gear leg with an exact replacement to avoid any differences in gear ratio which would result in an uneven…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Answer 10

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

view full answer...

Answer 11

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 12

To determine the best landing gear option for your 1997 Forest River Sierra you'll need to measure the where your weld-stops sit to see if there is a matching set so that you can swap over without having to cut off the old mounting brackets and…

view full answer...

Replacement Follow Leg For a 2010 Keystone Laredo 26RLS 5TH Wheel Camper

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching