Which Replacement Venture Lead and Follow Landing Gear Legs
Question:
Hello tech rep. I Have a 2008 Cameo by Carriage 5th wheel trailer 15000 Lbs. Im replacing a Venture landing gear assembly and would like to know which Stromberg Carlson landing gear assembly will match up to a well stop of 17.5inch bottom top well to top of bottom well? I purchased the LG-4 system 33.5, length is okay, with a 6500 lbs motor but the bottom well stopinch is way-way off. It makes sense to me since I already have a new complete system, all I really need is the appropriate lead and followinch legs part numbers Would that be the LG-1, LG-2, LG-3 or even the LG-4 if it comes in the 17.5 well stops configuration. Also can I still use the same components as that of the LG-4 if another LG leg system is recommended? I hope all that mumble-jumble makes sense. It took me awhile to construct it. I hope to hear from you today. I am a contractor and need to start my travel to my next assignment soon! Thanks for your time and knowledge. Sorry, no pictures.
asked by: John J
Expert Reply:
You could re-use your existing # LG-4 if you have that bottom attachment bracket relocated to the appropriate position. It would involve removing the existing bracket and having the bracket provided with the # LG-4 welded into place.
If you'd prefer simply replacing the lead and follow legs you can use Lippert's # LC119102 which is the replacement Venture lead leg and # LC119101 for the follow leg. The legs would be compatible with your existing motor. Each leg has the 17-1/2 inch stop spacing and a 35-3/4 inch travel. Lippert purchased Venture a few years back, so the parts are compatible.
Products Referenced in This Question
Replacement Follow Leg for Venture 5th Wheel RV Landing Gear
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Lippert
more information >
Replacement Lead Leg for Venture 5th Wheel RV Landing Gear
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Driver Leg
- Lippert
more information >
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 6001 - 7000 lbs
- Electric Jack
- Landing Gear
- 35 Inch Lift
- Weld-On
- 2 Jacks
- Stromberg Carlson
more information >
Product Page this Question was Asked From
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 5001 - 6000 lbs
- Electric Jack
- Landing Gear
- 35 Inch Lift
- Weld-On
- 2 Jacks
- Stromberg Carlson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Lippert Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear
- Shop: Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Shop: Replacement Follow Leg for Venture 5th Wheel RV Landing Gear
- Shop: Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin
- Shop: Replacement Follow Leg for Venture 5th Wheel RV Landing Gear - 33-1/2 Extended Length
- Shop: Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"
- Search Results: stromberg carlson landing gear
- Search Results: vmc900l
- Search Results: stromberg carlson
- Search Results: follow leg
- Video: Review of Lippert Components Power Landing Gear Repair Kit - LC146060
- Video: Stromberg Carlson Landing Gear Replacement Lead Leg Review
- Shop: Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Shop: RV Exterior Lighting
- Shop: RV Jack Pads
- Q&A: Replacement Landing Gear Legs for Venture Landing Gear
- Q&A: Keystone Raptor Fifth Wheel Trailer Landing Gear Motor Replacement
- Q&A: Bracket Dimensions of the etrailer RV Landing Gear System # RVLG-8HDL
- Q&A: How to Determine Replacement Landing Gear for 2009 Keystone Raptor Trailer
- Q&A: Selecting The Correct Replacement Venture Landing Gear Follow Leg On a 2005 Thor Tahoe Transport
- Search Results: landing gear parts
- Search Results: landing gear
- Video: etrailer Camper Jack - Landing Gear - RVLG-8000 Review
- Video: etrailer Landing Gear Set Review
- Q&A: Replacement Powered Landing Gear Recommendation for Keystone Raptor Camper
- Shop: Trailer Hitch
- Q&A: Availability Of 33" Ark Stabilizer Jack And Dimensional Diagrams Of Similar Ark Corner Steadies
- Article: Trailer Wiring Diagrams
- Video: Review of Ultra-Fab Products Camper Jacks - Landing Gear - UF17-943010
- Shop: Trailer Wiring