Derale Lighted On/Off Switch for Electric Fans

See what our Experts say about this Derale Accessories and Parts

• Can Two MaxxFan Dome Roof Vent Be Ran Off Single Switch
  Yes you could run two of the MaxxFan Dome Roof Vent w/ 12V Fan # MA00-03812B off of the same circuit to then be controlled with a single switch like # D16740.
  view full answer...
• Extension Cord For Furrion Vision S Monitor To Run Wiring Behind Dash
  You can use a NOCO Extension Cable # 329-GC019 to route the Power Cord # C-FOS07TAPK-006 for your Furrion Vision S 5" Monitor System # FOS05TASF. The extension is 12' long and the extra wire will not affect the power going to the monitor. For a cleaner install you can install a 12 Volt Outlet Kit # RM-9332 and wire it to a Switch # D16740 that will allow you to switch the monitor on and off when you need it.
  view full answer...
• Can Switch Be Used to Easily Reset Stereo in RV
  A simple switch like the Derale part # D16740 would work great for what you are wanting to do by giving you a simple way to reset the stereo so that Bluetooth works again.
  view full answer...
• Does Tuson Asymmetric Sway Control Have On/Off Switch
  The Tuson sway control part # 335TSC-1000 doesn't have an off/on switch so if you really wanted to kill it completely you would need to cut power to it with an additional switch on the power wire like with the # D16740.
  view full answer...
• Could the Hopkins Smart Hitch Backup Camera # HM50002 get Hardwired to Battery with a Switch
  You can absolutely hardwire the Hopkins Smart Hitch Backup Camera # HM50002 to your vehicle battery through a switch to let you turn it on whenever you wanted. The red wire of the harness would need to get run to the positive side of your battery while the black wire would get run to the negative side of the battery. For a switch you could use the Derale Switch part # D16740.
  view full answer...
• Kill Switch Idea for Powered Landing Gear Jack to Help Deter Theft
  You could make a kill switch with something like the Derale switch # D16740 so that when you have this switch off the jacks won't operate. The key will be to hide this switch so that only you'd know where it is. You'd want to install this on the power wire for your current switch's circuit and you'd be set.
  view full answer...
• How to Determine if Derale 32" High-Output, Electric Radiator Fan-and-Shroud Assembly Will Work
  Even though the engine components we carry are meant to be a supplement to the OEM components we have heard of people using them as replacements for OEM products. If you want to try using the Derale 32" High-Output, Electric Radiator Fan-and-Shroud Assembly # D16934 as a replacement then you need to make sure the 4,000 CFM (cubic feet per minute) is a high enough rating and that the overall dimensions of this product will fit your aplpication. I have attached a diagram showing the dimensions...
  view full answer...
  
• Can the Tekonsha P3 Brake Controller Be Wired to an On/Off Switch
  If you wanted the ability to cut all power to your Prodigy P3 Brake Controller part # 90195 you easily could do this by running a switch on either the power (black), or ground (white), wire although it is not recommended. For a switch you could use the # D16740 and then for 12 gauge wire you could use the # 12-1-1 sold by the foot. This isn't recommended as you'd lose all presets when you cut power to the controller and have to start over every time. For the permanent mount bracket for...
  view full answer...
• Back Up Docking Lights for a 2007 Chevy Silverado Z71 for Hitching Up to a Trailer at Night
  The Bully Bumper Mount Backup Light, # PL-807, uses a 55 watt H3 halogen bulb so the power draw is just about the same as a single headlight. But the light comes with its own wiring that you could run to a switch, # D16740, and connect the lights directly to the battery. Or, even better, get a light kit, # DL-16CC (35 watts), that comes with everything you will need. Or if you want to go the stealth route, you can use a back up camera with night vision, # 04928. It costs more but let's...
  view full answer...
• Does Switch Come with 55-Watt Halogen Area Utility Light # QH16CTS
  The 55-Watt Halogen Area Utility Light # QH16CTS would require you to install a switch as it does not come with one. The part # D16740 would work well as a switch. The light grounds through the mounting hardware so you would need to run the switch through the power wire.
  view full answer...
• Can Reverse Light of RV Be Used as Utility Light
  Sounds like you want utility lights at the rear of your RV instead of a reverse light since you mentioned you didn't want the lights to come on when in reverse. So what you could do is run the power for the lights from the RV battery and then use a switch like the Derale part # D16740.
  view full answer...
• Wiring a LED Amber Quad Flash Kit for Use on a Snow Plow Truck
  The flashing by part # CPL65A-STR is done inside the light. These lights will flash, or strobe, 4 times per second as long as 12 volt power is supplied to the circuit they are attached to. You will need a switch to activate and shut down the flashing lights. We have the Derale Lighted On/Off Switch, item # D16740, that can be used for this install and would be good to keep you alerted that the flashing lights are on, if you hook up the lighted function of the switch. The first light is...
  view full answer...
• How to Power Trailer Lights from Reverse Circuit and Trailer Battery Separately
  You'd want a diode like the part # RM-790. On the in side you'd run power from your trailer battery on one pin and then from the reverse light circuit on the other. On the circuit from the battery to the diode you'd need to install a switch to allow it to only draw power from the battery when you wanted it to. For that you'd need the part # D16740.
  view full answer...
• Can Derale D16928 be Used as Pusher Fan
  The Derale fan you asked about is only able to be used as a puller, so it wouldn't work as a pusher application. And these electric fans should be mounted inside the engine compartment as opposed to outside (you wouldn't want it exposed to the elements). The best option we can offer if you have limited clearance is a pusher fan with as little depth as possible: - Derale 17" High-Output, Electric, Single Radiator Fan - 2,400 CFM # D18217 This is a single fan which is 16-7/8" wide x 16-7/8"...
  view full answer...
• Does the Buyers Products LED Lighting Kit Include a Switch
  The Buyers Products LED Light Strip # 3375623755 that you referenced is designed to be tapped into a circuit so that it gets activated when the running lights or head lights get turned on. If you wanted to install a switch you could. For a switch you could use the # D16740. The optional switch that used to be offered as a separate item for the CIP EVO lights has been discontinued.
  view full answer...
• Does the Vision X LED Lighting Kit # HIL-TRUCK4W Come with an On/Off Switch
  The Vision X LED Lighting Kit # HIL-TRUCK4W that you referenced is designed to be tapped into a circuit so that it gets activated when the running lights or head lights get turned on. If you wanted to install a switch you could. For a switch you could use the # D16740.
  view full answer...
• Can 12 Volt Circuit on a 2012 GMC Yukon 7-Way be Used to Power Two 55-Watt Halogen Utility Lights
  The amperage draw of 2 of the 55-Watt Halogen Flood Beam Lights, # QH16CTS, is 9 amps. This should not be a problem for a 12 volt circuit on a 7-Pole. You can check the owners manual and/or the legend on the lid of the power distribution box for the fuse that powers the 12 volt circuit to see what it is rated for to be sure. The amperage rating for a factory 7-Way might also be listed in the vehicle owners manual. If connected to the 12 volt circuit from a trailer connector, the lights...
  view full answer...
• Which Wire to Use for Installing the Hopkins Backup Sensor System on the Front of a Vehicle
  The Hopkins Backup Sensor System, # HM60100VA, can be wired to any 12-volt source, that will work for your application. Normally the power wire for the backup sensor is spliced into the reverse light circuit at the rear of the vehicle, near the back of the taillights. If you want to use the system on the front of your vehicle, you will need to determine when you will need the system to be activated. If you want it to be on at all times when the vehicle is being operated, you could wire...
  view full answer...
• Will the High-Output, Dual Electric Radiator Fan Assembly 4,000 CFM # D16934 Fit on a 1985 Ford
  The Derale 32 inch High-Output, Electric Radiator Fan-and-Shroud Assembly - 4,000 CFM, item # D16934, is designed as a universal application and will mount behind the radiator on your 1985 Ford with 6.9 Liter diesel engine. You will need to measure to be sure there is room to mount the assembly behind the radiator. I have listed the dimensions below. Width - 31-3/8 inches Height - 15-3/4 inches Overall Depth - 3-1/4 inches Mounting Holes - 12-7/8 inches Top to Bottom Mounting holes -...
  view full answer...
• Wiring for the Third Brake Light and Dome Light for an ARE Camper Shell on a 2012 Nissan Frontier
  When installing a camper shell on a truck, typically, there is not a specific wiring harness for the third brake light and dome light. I am not aware of a wiring harness for a Nissan Frontier that will provide those functions for a camper shell. The installation of a camper shell usually consists of using the appropriate lengths of wire for the third brake light and dome light and splicing them into a corresponding circuit on the truck. It would be best to choose the same size wire, so...
  view full answer...
• How Does LED Work Light # UCL24CFB Wire
  The LED Work Light # UCL24CFB that you referenced wires in pretty easily. The red wire gets 12 volts positive and the black wire goes to a ground and it will light up. You'd want to use a switch like the part # D16740 so that you can switch it off and on as needed. Basically you'd need to wire the switch inline with either the power or ground wire and you'd be set.
  view full answer...
• Derale # D13900 Remote Mount Transmission Cooler for 2004 Ford F150
  I would recommend using the # D13900 which includes the 6AN to 3/8 inch hose barb fittings, which would be the correct size fitting for the 3/8 inch transmission lines of your 5.4L engine.You would also need two sections of the # D13003 11/32 inch hose. The fan is thermostatically controlled to actuate when the fluid temperature reaches 180 degrees, but you can omit installing the sender and manually control the fan by using an optional switch # D16740, although I would recommend using...
  view full answer...
• Could Switch be Used to Power Two of the 18-1/4" x 12" Holding Tank Heater Pad 277-000164
  As long as the switch can handle the amperage load of two of the heating pads part # 277-000164 yes it would be fine. This heating pad draws 4.8 amps. So the switch would need to be able to accommodate 9.6 amps. The part # D16740 would easily handle the amperage.
  view full answer...
• How to Wire Up the Hopkins Rear View Camera To Be On all the Time
  In order to wire a backup camera to be on all of the time, you would have to wire it into the running light circuit instead of the reverse light circuit. This way, when you wanted it on, you would just turn the running lights on. This would be the easiest way to turn it off and on. Or you could wire the camera to a 12 volt power source like the cigarette lighter circuit like you mentioned. This would make it turn on all the time. You could use a switch like part # D16740 so that you can...
  view full answer...

Do you have a question about this Accessories and Part?