Curt Class II Drawbar - 3-1/8" Rise - 9-1/2" Long - 3,500 lbs
(2004 reviews)
Price: $40.26
In Stock
Curt Class II Drawbar - 3-1/8" Rise - 9-1/2" Long - 3,500 lbs
Item # C45510
Retail:$73.15
Our Price: $40.26
You Save: 45%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (2004)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - C45510
- Fits 1-1/4 Inch Hitch
- Fixed Ball Mount
- Rise - 3 Inch
- No Ball
- 3500 lbs GTW
- Class II
- CURT
- Steel Shank - Gloss Black
- 3/4 Inch Ball Hole Diameter
Corrosion-resistant ball mount is 9-1/2" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.
Features:
- Sturdy, steel construction
- Corrosion-resistant, black gloss powder coat finish
- High-quality manufacturing process
- CNC machined for strong, consistent cuts and welds
- 7-Stage washing method delivers smooth, clean surface
- Drawbar can be used in rise position only
- Hitch pin and clip or hitch lock sold separately
- Assembled in the USA
Specs:
- Application: 1-1/4" x 1-1/4" trailer hitch receivers
- Compatible with Curt Class I and Class II hitches
- Gross towing weight: 3,500 lbs
- Tongue weight: 350 lbs
- Ball hole diameter: 3/4"
- Distance from center of hitch pin hole to center of ball hole: 9-1/2"
- Rise: 3-1/8" from top of inside of hitch opening
D-55010 45510 Curt Ball Mount - 1-1/4" - Class II
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- etrailer mistake
- Alternate product found
Customer Reviews
Curt Class II Drawbar - 3-1/8" Rise - 9-1/2" Long - 3,500 lbs - C45510
Average Customer Rating: 4.8 out of 5 stars (2004 Customer Reviews)
Corrosion-resistant ball mount is 9-1/2" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.by: Bryan R08/15/2014
Very easy to install, looks good and functions well. I would buy it again.
by: Steve D08/29/2015
Very fast delivery, Very low price for this sturdy drawbar... fits my Rav 4 Class II hitch perfectly.
by: Dave A12/14/2016
Fits my Curt hitch as described (also purchased from eTrailer), but if pushed in too far it gets stuck in the receiver tube. Had to use a wheel puller to get it back out! Just need to push it in an inch or so to the pin holes line up not problem. My only complaint about ETrailer is that they use huge staples to close their shipping boxes. The staples are tough to pull out (get out your screw driver and pliers if you don't have an industrial strength commercial staple puller). My cardboard recycler does not want these dangerous looking staples left in the box, so I need to pull every one of them out!
by: Nathan08/23/2016
All the items in my order arrived today. Thanks for your continued follow-up on this order and the speedy shipping once you had the item on hand. I also appreciated the installation video and pictures on etrailer. com. I routinely recommend that my customers reference your website for install instructions and product explanation videos. Keep up the good worK.
by: Lennox C09/28/2016
The draw bar was a perfect fit for the car. The price was very competitive and the delivery was fast.
Lennox C.
9/28/2017
Perfect, as designed.
by: Alex K.06/15/2016
Great product - just the right amount of rise for my little trailer!
Alexander K.
6/15/2017
Product still going strong!
by: Scott W.07/09/2016
Received the product much quicker than expected. Paid the minimum shipping charge. Well packaged. Some chips on the black powder coating, but, that's not really an issue for me. It fits well and appears to be a quality made item. Will be used on a 2013 Avalon for towing an 800 lb. teardrop camper. I will not know details until I actually get a chance to use it later this year. I will make a follow up review later on the year.
So far so good!!
by: Andrew J.09/22/2016
Delivery was as expected and item is exactly what I was looking for. The elangation and height is perfect, and it should easy hooking up the trailer and protecting rear bumper.
by: Joey E11/01/2016
Is very solid and fits perfectly into the 1 1/4 inch receiver. I and really surprised that it didn't come with a pin though
by: Overland Trailer03/25/2016
All stock on this ball mount is solid steel, making it heavier than most class II draw bars. It has a nice finish and good welds.
by: DL04/04/2016
Fits 1 1/4" receiver and has 3/4" hole for pin or ball and just barely clears the bumper.
by: Spike11/04/2016
Hitch was received when expected and fit. No complaints. I will purchase from etrailer again.
by: Paul L.02/01/2017
Let me just say that etrailer.com is the best in the business.
Great experience. The Web site is very user friendly and
thorough providing guidance each step of the way.
Also Personnel are well informed and most helpful.
Thank you,
Paul L
by: Thomas02/25/2019
I have UTV and has Class II hitch,so it's for that.
by: Mark08/03/2018
Receiver fit my 2004 VW Beetle perfectly, shipping was fast too A+ service thanks!!!
by: Charley12/22/2016
It works perfectly for my application, very happy with it.
by: Brian W.08/08/2017
Great product, excellent construction. Fit the way I needed it to tow a trailer behind my GoldWing Trike.
by: Jose04/06/2017
Easy to install and very strong. Now I can pull a trailer with my Audi. Very happy.
by: John H08/19/2017
Product was good as advertised. There was a problem getting the item, probably caused by UPS, but when notified, dealer was prompt to remedy it.
I can endorse this company without reservation.
by: Alondra09/26/2019
Works great! Perfectly lift amount for my lowered car . (2001 Audi tt) Easy install. Never had a problem. Thanks guys
by: Curtis B04/16/2017
Delivery was quick.
And it fit like a glove and was easy to install.
by: Justin M04/24/2020
Excellent product and great customer service
by: Alvin M09/18/2019
As advertised quality paint and welding .
by: tw09/25/2015
Very nice design, Quick delivery, Very happy with seller interaction. Thanks for great service and product.
by: G. New Trailer Boy09/03/2015
Great deal. Half the price of others I looked at.
Happy that I can use it up or down.
25
1998
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Recommended Trailer Hitch Receiver For 2005 Lexus LS 430I have a different option for you, but the Curt Trailer Hitch Receiver # C13900 you were looking at is not confirmed to fit your 2005 Lexus LS 430. Instead I recommend the Curt # C12231 which is currently the only trailer hitch receiver confirmed to fit your specific vehicle. This hitch has a 1-1/4" receiver with a 250lb tongue weight rating and 2500lb trailer weight rating making it a perfect choice for carrying a bike rack, cargo carrier, or adding a ball mount to tow a trailer. If...
view full answer... - Recommended Trailer Hitch for a 2001 Honda S2000 to Tow a Motorcycle or JetskiCurrently, there is one hitch that is a confirmed fit for your 2001 Honda S2000. It's the Curt Class-I trailer hitch # C11212 and has a tongue weight of 200 pounds and gross trailer weight of 2,000 pounds. Even though drilling is required to install this hitch, it will be pretty easy. I attached a link to the installation instructions. Since you will be doing some light duty towing, the wiring kit you need is # C59236. The kit adapts turn and stop lights (3-wire system) to a 2-wire system...
view full answer... - Can the Curt Trailer Hitch Receiver C11079 Be Used To Tow a Trailer with a 2002 VW Cabrio GLXFor a trailer hitch that is a confirmed fit for your 2002 Volkswagen Cabrio, I recommend the Curt Trailer Hitch Receiver part # C11079. This trailer hitch has a 2,000 lb gross trailer weight and 200 lb tongue weight rating. Therefore, you would need to tow the motorbike instead of carrying it on the hitch. In order to complete your towing setup you will also need a trailer wiring harness, the Curt Circuit Protected Converter part # C56175, a ball mount, the Curt Class II Drawbar part #...
view full answer... - Recommended Towing System For Motorcycle on TrailerI can't find the part number you are referring to so I will try to assist based on the other information. For your 2005 BMW 3 Series, as long as it is a Coupe, Sedan, or Wagon - excluding M3, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11174 you asked from. Then you can add the ball mount # C45510, pin and clip # F-4, and ball # C40018. For your trailer wiring, I recommend the 4-Pole Flat, Hardwire Kit, and Circuit Tester # C59236. Then for your...
view full answer... - Trailer Hitch Recommendation for 2003 VW PassatThe etrailer.com brand # e98906 Class III trailer hitch is a vehicle specific item designed for a 2009 - 2017 Volkswagen Tiguan and a 2017 - 2018 Volkswagen Tiguan Limited, so it wouldn't work on your 2003 Passat. For your vehicle, the correct hitch will depend on the exact vehicle model. -For a sedan or wagon that's not a 4Motion model, use # C11054 -If it's a sedan or wagon that IS a 4Motion model, but not with the 4.0L W8 engine, use # C11076 If you'll be towing a light-duty tralier,...
view full answer... - Trailer Hitch and Wiring for a 2000 Honda S2000Yes, installation instructions for Curt trailer hitch # C11212 (no longer available) are linked on its product page, right hand side of the page. I have also included a link to them here for you. This is a Class I hitch so if you are using it for a bike rack you are limited to 2 bikes at most and any accessory used has to be compatible with a Class I hitch. Also with Curt if you are using the hitch for anything other than a trailer you also have to use stabilization strap # 18050 per Curt's...
view full answer... - Trailer Hitch Fit for 2002 BMW 325i SedanThe Curt Class I Receiver Hitch # C11174 has a towing capacity up to 2,000 pounds. However, I was unable to find a towing capacity for your 2002 BMW 325i. Your best bet will be to consult your local BMW dealership to find you vehicle's towing capacity. If you determine that your BMW is capable of towing the cargo you are wanting to tow, the Curt hitch # C11174 will work great for you. The drawbar that is recommended for use with this hitch is the # C45510. For a 2 inch diameter hitch...
view full answer... - Is There a Trailer Hitch Available for 2004 Audi TTWe have a hitch for the Quattro models of the 2004 Audi TT. For that you'd want the part # C11765. This has a towing capacity of 2,000 lbs which should easily tow a small trailer with your bike you mentioned but you need to verify that your vehicle has the needed towing capacity in the owners manual. For trailer wiring you'd then want the pat # 119250KIT. For a ball mount you'd then want the part # C45510, and hitch ball part # C40001 for a 1-7/8 inch ball. We are near St. Louis, MO.
view full answer... - Recommended Hitch for 2005 Audi A4 AvantI have a solution for you, but the EcoHitch # 306-X7376 is only confirmed to fit on 2018-2020 VW Golf models and not the 2005 Audi A4 Avant. The only trailer hitch we have confirmed for your 2005 A4 Avant wagon is the Curt # 11164, which has a 1-1/4" receiver. If you're planning on towing with this hitch, you'll also need a wiring harness, ball mount and hitch ball. For the wiring harness I recommend using the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector...
view full answer... - Trailer Hitch Recommendation for a 2003 BMW 325xi WagonFor a 2003 BMW 3 series wagon the correct trailer hitch is # C11174. On this particular hitch installation the fascia does not get removed. If you plan on doing some towing the correct ball mount is # C45510 and you can use pin and clip # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. To add trailer wiring use # C59236. I have included links to the instructions for the hitch and wiring and a video showing a typical installation of the hitch. The vehicle in the video...
view full answer... - Trailer Hitch and Wiring for a 1999 BMW 323i SedanThe only trailer hitch for the 1999 BMW 3-series sedan is going to be Curt hitch # C11174. I have included a link to a video showing an example installation of this hitch for you. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. Curt also says you have to use stabilization strap # 18050...
view full answer... - Hitch Recommendation for a 2004 Volkswagen Golf to Tow Small CamperThe Curt Hitch part # C11066 that you referenced has been confirmed as a fit for your 2004 Volkswagen Golf GTI. The hitch itself has the towing capacities of 2,000 lbs trailer weight and 200 lbs tongue weight. As long as your trailer stays under this figure and the towing capacities that are listed for your vehicle in the owners manual you would be good to go. To complete your towing setup you may also be interested in purchasing the following: Draw-Tite Wiring # 119178KIT (installation...
view full answer... - Best Trailer Wiring Harness Option for 2004 BMW 325xi SedanSince there isn't a plug and play option for your 2004 BMW 325xi Sedan, the best option and the one I recommend is the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT. What sets this harness apart from others is that it uses sensors that clamp onto your vehicle's tail light wires to sense the current and transfer it back to the trailer connector. This means you don't have to worry about any potential issues caused by cutting or splicing into your BMW's factory wiring. The built...
view full answer... - Class I Trailer Hitch that Fits 2005 Volkswagen Jetta WagonFor your 2005 Volkswagen Jetta Wagon we have the Curt Class I hitch part # C11083 which is a confirmed fit and would work well. If you needed trailer wiring too the correct kit is the part # C59236. For a ball mount part # C45510 and hitch ball # C40018.
view full answer... - Trailer Hitch Receiver to Fit a 2005 BMW 3 Series Ci for Light Duty TowingThe Curt Trailer Hitch Receiver # C11174 is confirmed to fit a 2005 BMW 3 Series as long as your car is not a convertible. If you have a convertible we do not have a hitch that is confirmed to fit. This is a Class I hitch rated for 2,000 pound maximum towing weight and 200 pounds maximum tongue weight. It's a custom designed bolt-on hitch and does include a pin and clip. You should know, Curt does require using a support strap, part # 18050, if you're carrying any non-trailer loads...
view full answer... - Trailer Hitch and Wiring Harness for 2003 Lexus LS430We do indeed offer a hitch and trailer wiring harness for a 2003 Lexus LS430. For a hitch, I'd recommend the US made Curt Class II hitch, part # C12231 along with the # C59236 trailer wiring harness. You'll also need a # C45510 ball mount, a # PC2 hitch pin and # 19256 for a 1-7/8 or # 19258 for a 2 inch trailer ball.
view full answer... - Recommendation to Transport Motorcycle with 2001 BMW 525i Sport WagonThe only solution that could work for your 2001 BMW 525i would be to install the Curt Hitch part # C11179 that you referenced and tow a small trailer. Class I hitches the one for your vehicle not only have too low of tongue weight ratings for carrying a motorcycle carrier and motorcycle, they also do not make any carriers compatible with those hitches. If you plan on doing some towing, you will need a ball, drawbar and a pin and clip. For a drawbar use # C45510. For a ball use # C40001...
view full answer... - Best Trailer Hitch Recommendation for a 2000 BMW 328iWe do have trailer hitch that will fit your 2000 BMW 328i but # 24857 will not fit. If yours is a coupe, sedan, or wagon, excluding M series and convertibles, you can use # C11174. If you plan on doing any towing the correct ball mount for either hitch is # C45510. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring you can use # C59236. If you will be using the hitch for a bike rack or cargo carrier make sure that it is compatible with a Class I trailer...
view full answer... - Trailer Hitch That Fits 2003 VW Jetta WagonFor your 2003 VW Jetta Wagon, what you need is the Curt Trailer Hitch # C11083. For a ball mount the manufacturer recommends using the Curt Class II Drawbar # C45510. To secure the drawbar to your hitch will require the use of Pin and Clip # F-4; finally, you will need to add a hitch ball and the best ones to use with this drawbar are (depending on the size of your trailer coupler) the 1-7/8" Hitch Ball # C40001 or 2" Hitch Ball # C40018. For a wiring harness you can add the Curt # C56175...
view full answer... - Trailer Hitch Fit for 1999 BMW 528i to Tow Small TrailerI can help you find all the parts you need for your BMW, and the trailer hitch that fits a 1999 BMW 528i Sedan or 528i Wagon is the Curt Trailer Hitch # C11179. I've attached a link to the installation instructions so you can see exactly how it will install on your car. Since you mentioned towing you will also need a wiring harness to power your trailer's lights and a ball mount with a hitch ball to attach your trailer. Starting with the harness, the correct one for your '99 BMW 528i...
view full answer... - Recommended Trailer Hitch Receiver For Towing a Riding Lawn Mower with a BMW 3 SeriesThe Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11174 for your BMW 3 series will allow you to tow a trailer with a riding lawn mower as long as it is within the 2000 lb towing rating and 200 lb tongue weight. For this hitch, I recommend the Curt Class II Drawbar # C45510 along with a 2 inch hitch ball like # C40018. For your trailer wiring, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT...
view full answer... - Which Will have Better Ground Clearance Ball Mount C45510 or Euro Drawbar C45591Curt Class II ball mount # C45510 will actually be a little better with ground clearance compared to Euro drawbar # C45591 because it doesn't stick out as far and does not have as much of the steel shank below the ball.
view full answer... - Trailer Hitch Fit Recommendation for 2007 BMW 530xi WagonFor your 2007 BMW 530xi Wagon we have the Curt Class I hitch part # C11498 which is a confirmed fit and will work well. The # C19031 would not fit so you would not be able to use it. For a ball mount you'd then want the part # C45510, for a hitch ball # C40018 for a 2 inch ball or part # C40001 for a 1-7/8 inch. For trailer wiring you'd need the universal install kit part # C59236 which has been tested as fitting your vehicle.
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Steve D.
8/31/2016
Have used the ball hitch to pull my Australian Kamparoo all over the country- no problems!Thanks,