Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty, 1-piece forged ball mount measures 8-1/2" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.
Features:
Specs:
Average Customer Rating: 4.9 out of 5 stars (3829 Customer Reviews)
Heavy-duty, 1-piece forged ball mount measures 8-1/2" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.Very good heavy duty rating which is what I wanted. etrailer was great to work with
Excellent product great performance have putting it to work towing 10k no problem love it
Customer service is very good!
Thank you!
I have been towing trailers many years With no issues until recently. Trailer weights have increased and loads also. My three way ball with 2 5/16 was torn off of tubing because of insufficient welding, I was very lucky. Yes I went to a solid receiver with bolt style ball. Very great setup. Thanks curt for designing heavy hitches and etrailer for easy ordering.
Dean
7/12/2021
Best hitch ever, every time I see trucks with fancy trailers with low grade metal and low tongue weight receivers. They don’t know or don’t spend time looking at there set up. Very happy with your great products in towing. Thanks again.
Product is great.
Estimated arrival was Wednesday (I needed it by Thursday) it arrived the Monday after. I would have bought locally if I knew it was going to be late.
Well finished and fits well in my 2014 Silverado 2500 HD. Arrived without delay in good packaging. Don't forget to order a new pin, and lock. This is a 2-1/2 inch ball mount, and pins and locks for 2 inch devices are too short.
Larry P.
3/2/2018
No nonsense. Heavy duty and performs well. Dont it on your foot. It will hurt!
This thing looks hollow in these pictures but I assure you it is solid metal through and through . Very heavy piece and I now realize I made the right choice. The one thing I didn't like about it is the fact you can't find a ball with the correct size shaft to fit the hole precisely , so the one you have to use makes the lock washer sit at a canter in the hole above the nut, its a good thing my shaft has a cotter pin..
Monty
2/7/2022
Still satisfied with my purchase, ive had no problems with it. I have not had any issues with it coming loose. The best part about it is not having to pull the receiver out every time I have to change trailer ball sizes.
Very stout and solid. Fits a ball with a 2 3/4" or 2 5/8" shanks perfectly, so there isn't too much thread hanging out below waiting to get damaged. It slips into the Ram hitch receiver without much slop, but I haven't towed with it yet.
Pete A.
11/28/2017
Great mount for heavy trailering. There is virtually no movement. The paint is holding up well.
Just what I wanted. I am not a fan of the adapter on my Chevy 2500 so I prefer the 3" receiver. This one is solid and offers a small range of height adjustment.
William
2/28/2019
Holding up great, still looks brand new and working well.
Looks good
just need to install
< br>Thanks,
Needed this to fit the 2-1/2" square rec. hitch on my truck. It is a solid, forged chunk of iron. I use it with a 2-5/16" ball to pull a 20' trailer that is usually loaded with crushed rock weighing 4 to 5 tons. It gets the job done with no problem. Would buy again.
Quality heavy duty ball mount. Fast shipping. Good website.
D. J.
1/6/2018
Great products. Thanks.
On time, repeat customer... Products exactly what I wanted. Thanks for delivering what you promised.
Tyler
1/29/2018
Still holding up...the main sleeve has rusted a bit so I must keep some WD40 on it so it wont swell and get stuck to the truck..overall still very happy with the product a year later! One of very few hitches that can tow 15,000lbs!
Year later and ~5k miles on it - still solid as a rock and no issues/rust.. Looks good!
Brian
12/7/2022
Another year, another 7k miles or so on this and still no issues whatsoever.. solid product
Had purchased a 24' Cargo Trailer and needed ball mount to raise and level the trailer. E-Trailer fit the bill with a forged ball mount that I just mounted today. I also bought a new ball to go with the ball mount that had a higher weight limit. Also purchased a tri mount because it filled the lift requirement of level on the receiver. Over all a great experience and items were received in a timely manner. (It would be hard to mess these things up in shipping.)
may seem hollow, but is made solid all the way through
I received everything that I requested in a short time even with the free shipping. The ball mount and the balls I requested and the 2-5/16th ball and the 2" ball were just what I needed. the ball cap for the 2-5/16 ball fit perfect the ball cap for the 2" was really just made for the smaller ball. I would recommend that they make a ball cap for just the 2" ball. Got it to fit but not that well. I will need breaks for my boat trailer after this season and I plan on using etrailer for those parts. will need to call them before I make purchase as Im not sure how to size them up.
Curt makes one of the best product line of equiptment to tow stuff behind your vehicle. The one hitch I got made completely from one piece of steel and the 2 1/2 inch size for class 5's fit perfect in my reciver with out a adapter. I feel very comfortable towing anything with this hitch.
Nice powder coat finish.
Required spec for a dump trailer.
Steve K.
6/12/2020
As good as the day it was first put into service.
This receiver has performed perfectly for a year. It is a little rough in its finish, but it is solid and I do not have any concerns while towing heavy trailers using this receiver.
I found the Hitch Ball Mounts easily online with etrailer.com where I could not at any local retailers. The items are exactly what I was looking for.
Thanks for your easy online sales process and quick delivery.
Just what I wanted, no stores around carried a compatible item with this load capacity. Jumped onto Etrailer and had it in a few days. Highly recommend Etrailer to anyone who pulls a trailer
Needed a ball mount for a larger trailer. This one is large and makes use of the heavier hitch on my Silverado 2500.
Box showed up Damage and Empty
Jenny N.
12/19/2022
Oh my goodness! I will have our customer service team reach out to you so we can have the ball mount sent out.
Another great experience with etrailer.com. This is my 3 or 4th order with them. All deliveries were faster than expected. Customer service excellent. I've always ordered "national brand" items and pricing has always been better than any local comparison here in the Atlanta area. I always go to them 1st.
Items ordered are just basic trailer parts and tow equipment. Nothing fancy, just basic good products that work as expected.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
1/8/2020
Couldnt be happier great product its been a year and its still solid. I put it to work on a daily basis works like a champ