Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Do not follow the instructions for cutting the air dam. I cut mine 3" wide and 3 1/2 " tall. It was still a little wide. It goes without saying "you can always enlarge it but can't make the hole smaller." The poor instructions kept me from giving it 5 stars. I was able to put black silicon around the cut. Other than that it went on fine and seems to be sturdy. I chose the curt because it was lower and a bicycle rack would not stick up as high,1348848

Click to Enlarge

12teachscience

8/7/2023

The front hitch is fine. I would like to emphasize do not follow the instructions on cutting the air dam!

by: Tim K12/08/2022

Delivery was quick, a really easy installation I did myself.
Perfect for carry rack, spare tire, winch and moving my trailer!1480534

Tim K.

12/9/2023

Works great and when not being used its basically out of sight on the front of the truck!

Mike L.

12/9/2023

@TimK We're glad you're happy with it!

by: Joseph 05/01/2024

Love this front mount receiver hitch, great solution for mounting my winch, but will likely use it for a front mounted bike rack and other things in the future. Very heavy duty. Install was a breeze, but you do have to cut a small hole in the front apron for it to exit through. I used my multi-tool for a nice clean cut.1776972

The customer service I received was great. I was in Nashville when my bike rack actually broke the welds on my fifth wheel bumper. I needed to purchase and install a front receiver for my F350. We were only staying in Nashville for 5 days so I needed the hitch shipped quickly. James R was my customer service rep. James had the hitch to me in one day. He also sent me a how to install video. The installation went well. I am 65 and was able to do the install with a little help from my floor jack.
Great experience1606533

Click to Enlarge

by: Rodney04/28/2024

I installed a large tool box for extra storage during an extended trip to Utah. The hitch was no problem and I minimized lateral movement by strapping the box frame to my tow hooks and it worked great. I will be installing a front motorcycle carrier in the future1775259

Click to Enlarge

Product arrived in a damaged box (handlers) but the sturdiness of the product and proactive taping of the hardware to the receiver prevented any parts from being lost.

Installation video was helpful. Instruction from manufacturer assume you know all terminology. Installation times shown are questionable. Two retired IT engineers completed the install in approx 3.5 hours. We decided to take off air dam to have better access to the bolts holding the fascias.
Getting a torque wrench on the "joined / reused bolts" was challenging as it is a one click on the ratchet.
Super pleased with the outcome and installation we accomplished. Going to use this to haul a pair of ebikes using a Swagman Ebike contraption. :-) Will mostly likely add a 4" drop adapter to lower the bikes out of the field of view while driving.1566553

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Thomas 01/10/2023

Have installed a 10,000 lb winch in the front receiver and it is working perfectly.1497127

Thomas P.

1/11/2024

Its just as good today as the day it was mounted,a great product

Love the hitch took about a hours to install , I didn't rush or have help, went together easy self explanatory if you a little mechanical inclined. Look forward to mounting trap and winch in next couple days and using maybe in the next couple weeks. Thank you very well built, package was tore open in shipping not sure if can be packaged better but I not really care it a reciever it going to get beat up anyways!1741328

Definitely a quality item, very satisfied with it. My truck is a 2X4 so has a smaller air foil below the bumper and it did not require cutting, there's a 1/32 to 1/16 inch gap between the two. I used some wood blocking to support it for the install and checked the paperwork and my measurements a few times thinking that I might have the wrong part because when the hitch was supported by the hardware there was about a 5/16 gap on both sides, had to draw that in by tightening each side alternately. All in all good. The hitch has the mounting holes needed for existing items that you will move to fit it in. Took me 4 hours to install including sizing the wood blocking that I used to support it. Also because I had to tighten each side a little at a time to close the gaps, tough work on the thick plate that is used to make the hitch. Extremely happy with the hitch including the access to the pin. Definitely glad I got it, definitely glad I got it here as well, on my porch in three days :)664909

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Steven07/28/2022

Volvo Cross Country

Carrying mountain bikes on 3 year cross country Airstream trip and this front mount system is great... no issues so far. Keep lubricated and periodically check threaded pin and life is good!1341063

Click to Enlarge

Click to Enlarge

Kudos to E-Trailer for fast delivery. Due to the weight the box was beat up pretty bad, but no damage to the hitch. Quality hardware included as well as fish wires to get the hidden bolts into place. The measurements for cutting the slot in the air dam were wrong as far as I was concerned. The instructions said to cut 4 inches up and 3 1/2 inches wide. As you can see by the pictures, 4 inches up is too much. The top should be cut right where the curve at the top of the air dam cross feature is. I did install this by myself. A helper would have been a good idea. If you choose to install this solo, get the supplied bolts that hang down vertical started loosely first to carry the weight of the hitch. Then you can maneuver the hitch to line up the holes for the side bolts. Once everything is tight the hitch is very solid and except for my boo-boo with cutting the air dam, is almost invisible.729997

Click to Enlarge

Click to Enlarge

Click to Enlarge

Quick delivery, no missing parts. Went on easy after cutting the trim as in the instructions.1761013

Great product. I appreciate that it came with ALL of the hardware and fish wire needed to route the bolts. Well thought out.1711962

by: JL12/11/2023

WORKS GREAT! I made a trip to Alaska and back with the attached tray holding a generator and 10 gallons of gas. No problems at all.1700533

Excellent quality, perfect fit and installation went very smoothly. This is the 2nd Curt front receiver hitch I’ve purchased from etrailer. Very pleased with the ease of purchase and very fast delivery! I’ll be switching between a winch and snow plow on 2020 F350 Superduty.1646695

Installed the 31078-hitch on a 2020 Ford F250 4x4 diesel truck. The install was completed from the garage floor, so the fascia was removed for easier access. The truck had fascia brackets, so they had to be removed and NOT reinstalled. The 31078-hitch fit perfectly and was easy to install with a person helping hold the hitch during the bolt installation process. As everyone has stated, don’t cut the fascia as per the instructions because the hole will be too big. I was successful in cutting an opening with about a 3/8” gap along the sides and top. This hitch will be used to carry a bike rack, generator, or cargo carrier.1603790

The hitch arrived in a few days and fit perfectly. Everything we needed was included. I would highly recommend the product and company. 814396

Click to Enlarge

David

6/14/2021

Perfect.

Nice quality product. Packaging pretty banged up but didn’t expect any damage given what it is. Kind of hard to damage steel.
No problems with installation. Two front bolts both sides a challenge to torque given limited swing on wrench.
Curt was pretty generous on trim dimensions on front air dam. I trimmed to their dimensions and have over an inch of clearance on top. Side to side is okay.
Overall quite happy with my purchase.807004

Click to Enlarge

Very well made. Great hardware. Straightforward installation.
Will be hanging 2 E bikes off a Superduty. Very pleased with product. And great fast shipping. Thanks.1664424

Have installed 2 other Curt hitches on other vehicles without problems. Was not the case with this one. Fit was super tight, requiring a hammer to knock it in place on my new F-250 that only had 900 miles on it. I called the Curt technical support department and they were of no assistance. Blamed tightness on Ford. Also be very wary of the amount of skirting trim Curt recommends in their instructions, as it is way too much. I noticed that as a problem while watching the etrailer installation video and the installer trimmed out too much. Disappointing.1545654

Item and the fasteners are the highest quality, no import junk.
The welds, deburring, and paint are also superior.
The fit is spot on, not snug, not loose, just perfect.
It went on a 2021 F250 Tremor and no trimming was needed for the front fascia.
It hangs down to about the front steering linkage level, a perfect clearance marker.996200

David

4/1/2022

Excellent ! Very Strong

Arrived on time. Easy install even with a ranch hand grill guard already on the truck. Used 7” grade 8 bolts to secure thru guard frame and hitch. Used a transmission jack to raise hitch into place. Very heavy duty hitch and quality.1567729

Fit perfectly and relatively easy to install. Only drawback is that it didn't come with a hitch receiver cover like my last one.1208806

John K.

11/22/2022

Works perfectly. Very happy with it.

by: Stephen 09/14/2021

Purchased this hitch a year ago, and was just as described. I installed it myself and it was pretty easy and straightforward. If I remember correct, it took about 1.5-2 hrs to install using all hand tools, laying on the ground by myself. Probably could cut the time almost in half using power tools, a lift and another person to help position and hold the hitch. Definitely recommend this hitch.1152034

Hitch looks good, shipping box is trash ed.1633763