Comparing Draw Tite and Curt Front Hitch for 2020 Ford F-250

Question

Question:

I see you guys have a few options for front hitches for my 2020 Ford F-250. Which would you recommend for me?

asked by: Fred

0

Expert Reply:

We have two really great front hitches that fit your 2020 Ford F-250 with the Draw Tite part # 65076 and the Curt # C31078. The big differences are that the Draw Tite will stick out past the air dam a bit more than the Curt. Also the Curt is made in the USA. I attached a picture that shows where the Curt installs relative to the air dam.

I would go with the Curt for the reasons mentioned unless the accessory you plan to install in the front hitch has a shorter shank.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I attached pictures that show how the Curt front hitch #C31078 and the Draw Tite #65076 looks when installed and you can tell that the Draw Tite sits up a bit higher since it comes through relative to the curve in the air dam.

view full answer...

Answer 2

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 3

Yes, it will so long as your 2023 Ford F-350 doesn't have dual rear wheels. It won't work with the dually models since there is a larger front mounted auxiliary cooler that interferes with installation. The EcoHitch Hidden Front Hitch item…

view full answer...

Answer 4

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Answer 5

We have checked directly with the manufacturer and confirmed that the Draw-Tite Front Mount Hitch #65076 will be a good fit for the 2023 Ford F-350 Dually. It will be a no-drill install, but you will have to temporarily remove and trim some of the…

view full answer...

Answer 6

Yes, I was able to verify with Curt their Front Mount Trailer Hitch Receiver #C31078 will fit your 2024 Ford F-250 4 wheel drive.

view full answer...

Answer 7

Hi Kris, TorkLift lists part number #EH54QR as a fit for a 2023 Ford F-550. The #306-X7904 is not listed as a fit for an F-550 at all but we've confirmed it on our site because F-350 owners were trying it and it fit. Most likely it could fit but…

view full answer...

Answer 8

Yes, the Curt Front Mount Trailer Hitch Receiver, #C31078, is confirmed to fit the 2021 Ford F-250 Super Duty. Please note that because you have the Tremor package the air dam is very short in height compared to the other F-250 trim levels. So, you…

view full answer...

Answer 9

No, you're going to want to use the Hellwig Adjustable Rear Anti-Sway Bar item #HE73GR instead. This one is also 1-1/8" but it is designed for trucks with a stock ride height or the ones that have been lifted up to 2". It is confirmed…

view full answer...

Answer 10

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...