Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling required for installation , Requires temporary removal of bumper/fascia during installation , Heat shield must be permanently removed for hitch installation
Average Customer Rating: 4.9 out of 5 stars (135 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.Hitch was exactly what was advertised and fit my 2014 BMW 328i X-drive Touring superbly. The instructional videos made for a quick and easy install. Super fast shipping (actually arrived 1day prior to estimated delivery date) Highly recommend Etrailer.com for any towing needs!
The hitch fits perfectly and it works very well. It does need a bit of a more involved installment, which can add a lot of costs if you are not planning to do it yourself. If you are, you will need a range of different tools. The video posted helped a lot, though.
Installation video was super helpful - laptop in the garage to follow along and pause, etc. I'm definitely a do-it-yourself guy with most automotive things, and while it's annoying to take the bumper off, there's nothing too crazy. I have to believe it's much easier to back the car onto ramps as I did. As for the hitch itself, I use it regularly for a bike rack but nothing else, and I have zero complaints. It's fairly hidden so not obnoxious.
Kyle L.
11/7/2018
Zero complaints after a year. It does exactly what I need it to!
Great customer service as usual! Arrived un-damaged as expected. The hitch is sturdy, cleanly painted & solid.
I was somewhat concerned about the installation given that instructions were for a BMW F30 (sedan) v. a F31 (sport-wagon), which is what I own. However, I had no challenges except for the heat shield.
Some online forums suggested removing it entirely, which I could have done, but it seemed like having some of it in place was better than none. So, I cut it to fit as best I could. In hind sight I was a bit aggressive, but successful nonetheless.
Hitch fits very well and I didn't have to cut the bumper which I was happy about.
I only use the hitch for my bike rack, but when going down the highway, things do wobble around a bit, so in hind sight I might have been better off if I had opted for the 2" receiver.
Installation was easy, once you get the bumper off. But that is because of the vehicle, not the hitch receiver. Perfect fit!
After 1 year of service, my hitch is performing flawlessly. It's mounted on my 2011 BMW 335i, which is my baby. NOTHING goes in or on that car without first being checked out thoroughly. This hitch is no exception and it's worked out nicely. One of the things I like most about the hitch is how snugly it fits under the bumper (see photo). Ground clearance is already an issue with this car and I didn't want to make it any worse.
After 1 year, hitch is doing fine.
Real nice quality. Good welds, nice powder coat finish. I did make it a bit better by making it a 2” receiver..but not totally necessary. Just fits my other hitches that way.
I bought this receiver just a few days after I bought my new car. I decided to have a local shop install it for me, to the tune of $250ish, and it was well worth not messing with parking sensors and removing bumpers, so I can't speak to the ease (or lack thereof) of install. I have a 2018 BMW 4 series, for reference. I have had this receiver on my car for nearly a year, and I absolutely love it. It sits flush with the bumper so when I remove my rack, it's barely noticeable. I absolutely recommend it.
Chrissy
1/31/2022
Have had absolutely no issues this last year! Got an add-on for my 1up so its now a 2up and the receiver works perfectly!
I had the product installed on my 2018 330i Xdrive today. I had my dealer do it, since the website made no claim that it would work on an Xdrive, and some reviewers hinted at a “challenge” relating to a heat shield. Also, one reviewer sawed out a piece of his bumper! I wasn't going to do this, that's for sure.
Installation took the technician 2 hours (I thought I saw a claim of 30-45 minutes?), and there was indeed an issue relating to the heat shield that sits between the muffler and the back bumper. It was not possible to put the shield back as it was originally, because the hitch is in the way. I told him to fasten the shield to its screw holes on the bumper using cable ties so it won't flap and rattle. He and his manager were perfectly OK with this. My only complaint is that now from a distance (say 20 feet) you can see the bright aluminum heat shield hanging under my black car. Maybe I'll need to paint the shield black.
All in all, I'm happy to have a hitch!
Mike L.
7/16/2019
According to Curt, the heat shield should be removed and not reinstalled. The hitch itself will serve as a heat shield.
On 28 September 2019, I ordered a Curt Class I Trailer Hitch - 1-1/4 and Kuat Transfer 1 Bike Platform Rack (For Fat Bike) for installation on my 2013 BMW 328i. The items arrived quickly. Since I work overseas, finding a reputable shop to install the hitch was a challenge. Fortunately for me, etrailer has an excellent how-to video for installing this hitch on a 2013 BMW 328i. The video came in very handy because the mechanic was used to working on trucks and different types of hitches. The installation took approximately 3 hours to complete. So far, both the hitch and platform are working great. As for the platform, it will barely fit 4.8" or larger fat tires (see pictures of my 5" tires) and the front tire must be partially deflated in order to secure the bike properly. Also, the clamping mechanism on the fat tire straps broke after one use. They are a complete waste of $$ IMO. I highly recommend using either rubber tarp straps, bungee cord, or heavy duty velcro straps to further secure the frame and rear wheel. I hope this review helps and let me know if you have any questions. Happy trails!!
The installation was easier than I thought on my 2018 BMW 430i. The video I watched had you drop the muffler to remove the rear portion of the heatshield (it was never put back on). Instead, I removed the bumper skin and bumper to have easy access to the heatshield. Then used a tin snips to custom cut the heatshield to allow placement of the hitch. All was accomplished without the use of a hoist or ramps.
Also, on the hitch itself, the 1-1/4 inch receiver tube only has 1 hole for the 1/2 inch threaded pin needed to secure my Swagman Rack receiver bar. That hole is 1-1/2 inch into the tube opening. I drilled another 1/2 inch hole 3 inches into the opening. Now the receiver bar uses the full length of the receiver tube and is much more stable. Also, the Swagman Receiver bar has a second hole that I can place another bolt through for even more secure fit.
Installed Curt Hitch #C11367 on my 2013 BMW M Sport Package Sedan. Fits perfectly with no issues at all. Not sure why curt only shows it available for the 328i. Get it.
A. M.
9/13/2015
S.G. what did you do for the heat shielding? Trim it or leave it off? Any issues if you left it off?
The fact is that the hitch is well made and I have no complaints at all with etrailer. They did a great job. However, be aware that curt does a terrible job with the installation instructions. The instructions are embarrassingly poor. I have a semi-pro garage with all of the tools and it required 3.5 hours to install this on a 2015 BMW 328i wagon. Unfortunately Google wasn't much help either. But it's not rocket science, and can be figured out. It's just a LOT more involved than implied in the marketing material.
You MUST remove the rear heat shield section. The "maybe" provided by Curt is another example of their simply not doing diligence.
Anyway, a good hitch with less than no installation instructions. If I'd known I'd have recorded the process and youtube'd it for future explorers. Pleased with the purchase and etrailer. Obviously a bit riled at Curt. : )
Quality item, but two ebikes (even with batteries removed) on a mount to the hitch are uncomfortably wobbly. Not the hitch's fault, but I suspect the larger size receiver would have allowed attachment of a more stable bike rack.
BEWARE OF COMPATIBILITY CLAIMS. I have a 2014 320i xDrive sedan and the hitch is not compatible with the heat shield. After working to install everything, I found that the base plates for the hitch did not fit the shape of the curve of the heat shield AND the hitch itself prevented the heat shield from attached back onto the bottom side of the bumper skin. As an installer of average skill (not a mechanic), it was very disheartening to have done all this work to run into this issue at the end.
The product did ship very quickly (with regular shipping) and arrived undamaged. The hitch did fit on the bolts it was supposed to. Just the issue with the heat shield compatibility.
This Trailer Hitch is the real deal. Great material, great gloss black powder coat. Easy to install.
There are a few steps I did not need to take in the installation that the video instructs you to do (lower exhaust off of bracket and remove heat shield) but the video is very helpful.
Was worried about fitment with the M Sport bumper but it clears perfectly. Very cool product, well engineered. Beats spending $600+ for roof racks! (Before buying basket/bike rack)
Shipped quickly as well!
We purchased this for our bike rack. Now I wonder what else we could use it for. This is an excellent trailer hitch!
William
3/26/2023
All is good one year out! The product continues to look good and perform well.
This was my second hitch and as before, the service was superb from purchase to delivery. There were timely updates between deliveries.
This hitch was for a 2016 BMW 320i.
Install was simple little over an hour and it was ready to tow fitment was great and love the euro style drawbar I got with it
Just finished installing the Curt 11367 hitch on my 2016 BMW M235i. The 11367 fits the M235i perfectly. Contrary to the instructions I suggest leaving the heatshield on the car, I used metal shears (tin snips) to cut out where it interferes with the hitch, see the picture. Alternately you could carefully hammer the heatshield in those areas to reshape it to clear the hitch. I'll be attaching my 1up bike rack for those more remote mountian bike adventures.
Works great with my bike rack. Mechanic said installation was easy. The receiver was too high so the back skirt of the car needed about 1 X 2 inches cut out.
Installation is time consuming, but certainly doable at home if you follow the instructions step by step. Watch the video on the website; it's much better than the written instructions. One thing the video doesn't mention is the heat shield isn't replaced. The final product is very clean and hardly noticeable.
The receiver fit perfectly with no effort. Had it and the wiring harness done in a short time. Pulled a 5x10 trailer with a motorcycle in it 1400 miles with no issues. Thanks.
Perfect for 2014 bmw 328d
Takes about 4h to take the rear bumper out, reinforced bar, add this towing hitch and put back your bumper.
Thank you, etrailer- fast delivery too!
Fits perfect and doesn’t stick out
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Missael
4/13/2024
Works as designed. No issues.