Trailer Hitch Fit for a 2012 BMW 328ix Wagon

Question

Question:

I need a light weight hitch for a 2012MW 328 ix wagon I only see sedan hitches and need wiring set as well?????

asked by: Tom C

0

Expert Reply:

We have had several customers come back and say they were able to install the Curt Hitch part # C11367 on their 2012 BMW 328ix Wagon so we can safely say it will fit.

For trailer wiring you would then want the zero contact wiring harness part # 119250KIT which is a confirmed fit and doesn't' require any hardwiring.

For a 1-7/8 inch ball mount you would want part # C45571 or for a 2 inch ball part # C45572.

expert reply by: Jameson C

0

Answer 1

There are so many variations of the 2012 BMW 3 Series that it gets a little confusing with which hitch fits which model but I was able to confirm for sure that for a 2012 BMW 328i xDrive Wagon the correct hitch fit is the part #C11367.

view full answer...

Answer 2

I have an option that will fit your 2008 BMW 328 Wagon, however, the Curt Trailer Hitch Receiver #C11033 will not fit the 2008 BMW 328 Wagon, it is made to fit the BMW 328xi and 335xi Sedan. For the Curt hitch, all non-trailer loads bike racks, cargo…

view full answer...

Answer 3

The Curt class I hitch #C11367 will fit your 2011 BMW 328i xDrive wagon. I spoke with my contact at Curt and he verified that it is a fit for your BMW. I have included a link to the installation instructions for you. If you plan on doing some towing…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Trailer Hitch Fit for a 2012 BMW 328ix Wagon

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching