Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This solid, high-strength, flush-style hitch lock lets you secure your ball mount, bike rack, cargo carrier or other accessory to your 2" x 2" trailer hitch receiver. Rust-resistant stainless steel construction. 5/8" Pin diameter.
Features:
Specs:
Note: This lock will not work with some factory 2" trailer hitches that have an outside width 2-1/2" or wider.
The unique ball-bearing locking system on this Lifelong hitch lock is supremely easy to use. When you pop the deadbolt onto the end of the pin, the integrated ball bearings engage the lock automatically. Grease the ball-bearings periodically to ensure smooth operation.
This ball-bearing system also ensures that the structural integrity of the pin is maintained throughout. A typical padlock-style hitch lock has a significant taper at the end of the pin where the lock snaps into place. This taper weakens the pin, making it easier to break or cut. Because the ball bearings are responsible for engaging the lock on this Lifelong lock, no taper is needed. So, the pin diameter is the same along the entire length of the lock. The result is a hitch lock that is strong, durable and highly tamper resistant.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (459 Customer Reviews)
This solid, high-strength, flush-style hitch lock lets you secure your ball mount, bike rack, cargo carrier or other accessory to your 2" x 2" trailer hitch receiver. Rust-resistant stainless steel construction. 5/8" Pin diameter.I purchased this Bulldog pin for my 2015 Yukon with a factory installed hitch. In this application this Bulldog hitch pin fits very well.
I selected this pin due to its simple design and the generally compact diameter of the lock cylinder and the pin's beveled head-end.
The lock cylinder diameter is import since GM penetrates the nominal 2" ID hitch tube through a steel bulkhead. There is only 7/16" distance between the hitch tube's nominal 5/8" clearance hole edge and the face of the factory bulkhead. Also, the hitch tube is fillet welded to the bulkhead. Thus, both the pin head and the lock cylinder need to have some relief (i.e. the bevel on the pin head-end) in order to clear this external bulkhead weld.
Most of the above fitment concerns are overcome by the Bulldog pin's grip length being greater than that listed on the etrailer site (and in their videos as well). Specifically, the grip length is 2-11/16" rather than the listed 2-1/2". See the attached photos. Note that in the first photo the lock cylinder is firmly seated on the ball locking end of the pin. In the photo note that the cylinder is fully engaged and locked, which would not be possible if the cylinder was not fully seated on the pin end.
The first photo shows the dial caliper fully closed and properly reading zero.
Also note that the GM hitch tube is 2-9/16" square (outside dim.), thus technically a 2-1/2" pin grip length would be inadequate in this application. Since I have a metal turning lathe I was prepared to machine the pin a slight amount in order to make it fit. Thankfully, this was not necessary since the grip length is 3/16" greater than advertised.
The pin is Chinese made in "stainless steel". I did test the pin with a magnet and it does appear to be austinitic (high enough in Ni and Cr alloys) since the magnet had no attaction to the pin.
I do like that the lock cyklinder has an internal o-ring to help keep out "road splatter". I also gave the lock cylinder a short squit of WD-40.
In sum, a well designed rugged product at a fair price.
This is probably one of the best stainless hitch locks of the regular through-pin style locks. It installs flush, and uses a solid pin. The locking side is also beefier than most, and sits tighter and deeper on the pin than most other pin locks - making it harder to try and hammer it off, or getting at the pin with a cutting tool. The lock uses large solid ball bearings for the lockup, and a disk style locking mechanism, which is harder to pick without specialty tools. So overall, one of the best regular pin style locks. We towed a 6'x12' that weighed around 6,000lbs from PA to FL without any issues with the pin-lock. We actually had to disconnect our trailer along the way, a few times, and the pin was easy to work with, and the lock really smooth. Don't hesitate to get it.
The Bulldog Lifelong Trailer Hitch Lock is extremely well made but the greatest attribute is how easily and securely you can change hitches. The locking mechanism works beautifully unlocking and snapping back together. Although I cannot rate endurance, I am sure it will wear well.
It is OK but didn't fit my truck and I did not like it.It is made in china and was not as heavy duty as I would like. The tapered inside ends prevent it from locking on my 2 inch receiver. As a first time buyer from etrailer they customer service is excellent and the shipping is lighting quick. I purchased a Infinite Rule weight rated hitch pin from etrailer instead. Super heavy duty and U.S.A. made for my Gen-Y trailer hitch. A match made in towing heaven!
The ordered item is one of many I've ordered from etrailer. These people are customer intensive with all sorts of help and information that is needed to make an intelligent, knowledgeable very useful purchase. They tell you what you need to know.
Terry
12/8/2021
Our experience has not been good. These snap pads were put on a 2021 Tiffin Bus 40IP. The left rear would not stay on so I ordered another one from eTrailer. It would not stay on either and over time three fell off and Tiffin at Red Bay removed the remaining one. I used the soap as suggested to get the pads to slip into position. It seemed to me the rear pads were slightly larger than the jack pad itself. But, the problem could have been entirely me. I did put pads on a 2020 Tiffin Red and that was perfect. eTrailer has been outstanding with their customer support and excellent helpful videos - none better.
I like the fact that the shaft is one piece of solid steel. The actual locking component of the 2-piece hitch lock has tumblers and a key that seems loose. Also, the 2 ball bearings inside the shaft fall out too easily when the locking component is removed. You really have to watch out for them falling out and rolling away when you unlock the shaft and remove the lock piece.
Works exactly as expected. Great price and fast shipping from etrailer.
Don't buy this. It worked, less than 2 dozen uses. In between it was stored in the truck and out of the weather and has not been abused. I noticed once or twice that it seemed unlocked when I reached my destination, and thought I hadn't locked it properly. But now after some testing I realized that by simply shaking the lock it pops open!! Talk about NOT secure...
The customer service and the timeliness in which l have received my orders from etrailer.com is second to none. I needed my hitch to arrive on time so I could pick up a nice chunk of Sycamore. A bit of electrical tape on the shaft to eliminate "play" in the receiver, slip in the new lockable SS pin from Bulldog and off we went to pick up my prize! What a great company to do business with!
Very secure and strong lock.
Dwayne
6/24/2023
This is a great product. Easy to use and open. Secure!
After about a year of being under the truck, this lock still works. It is getting a little hard to get the lock off but the key still turns good. I will add some lube to it and see if it frees up next time I change hitch size on that truck. Looks like the rubber o-ring or the balls are a little stiff.
Still a good lock and this is expected for where this thing lives on the truck...
Bert
11/27/2018
Still a little stiff but hasnt really changed. lube helps but when its cold out the rubber makes it hard to get on and off. White lithium grease helped a little. I may try a silicone grease next. The rubber cover for the key is gone so well see how long the key works. It works and Im good with it.
I needed a very good hitch lock and I found it at e-trailers when I bought the Bulldog SS Hitch lock. It is an outstanding piece of equipment that is easy to engage and unlock. It is very strong metal and I will not worry about the safety of my trailer which I use frequently. I received the lock in a matter of days which I like very much. Customer service is excellent at e-trailers.
Drdyess
5/27/2016
It is still an outstanding piece of equipment and still working great
Excellent product. I purchased two of these locks and although I have never had a problem at any campsite I have ever been to, it is nice to have peace of mind that expensive items are secure. I purchased one to secure the hi-lo hitch and another to secure the actual tow bar itself. Whenever I have to remove or deploy the unit it is very easy to do so. Just press the button to lock it in place or turn the key and pop the lock to remove. Simple, very well made and am very happy with the product.
Guillermo C.
7/20/2020
Excellent, no problems at all after extensive use. Gives me peace of mind that hitch and tow bar are secure when I’m traveling away from the campground.
Very satisfied with this Lifelong hitch receiver lock. It was advertised as being of stainless steel construction and is 100% STAINLESS STEEL!!! There were others that I purchased that stated they too were all stainless, but in actuality they weren't and rusted in a very short period of time. Once again, I'm very satisfied with this product that I purchased from etrailer. THANK YOU!
Anthony
8/30/2014
Fine
I purchased this for the rust proof property and the snap in locking feature. The key hole cover is flimsy. I switched it out for my old hitch lock cover. It has a band that fits perfectly around the top of the cylinder and a fold down cap.
Seanonsports
1/8/2015
The lock has not rusted. It fits securely. The key hole cover was switched out by me with a rubberized cap.
Had this lock in my truck for almost a year now. Was working great but I lost the rubber cap that covers the key hole and the salt and slop of upstate New York is making it difficult to lock/unlock.
Cleason
2/7/2022
Had to quit using it because it siezed up.
Heather A.
2/18/2022
I purchased this item about a year ago and have used it a dozen or so times. The lock will no longer open and deploy… I have ordered another lock pin from etrailer… Hopefully will have better luck with this one. But the bulldog lock has been a disappointment…. I would not recommend or repurchase.
Sierra K.
8/18/2021
Thank you for your comment. Aftermarket items that will be out in the elements need to be lubricated every so often to keep them in good working order.
these locks that we purchase were outstanding. they hold very in the desert environment aboard the MCAGCC base.
I can't recommend this hitch lock. The locking cap has a pin that fits into the end of the pin, pushing two steel balls outward, which prevent the cap from coming off. The locking cap worked fine, but the steel balls in the pin corroded to the point where they would not withdraw back into the pin. After 22 months on the truck I could not remove the locking cap from the hitch lock. Fortunately, I was able to use a pry bar to force the locking cap off and remove the hitch lock.
I do occasionally launch my boat in saltwater but the pin would never have been submerged, so I still wouldn't expect the corrosion.
FYI, I replaced it with a screw-on type lock and thoroughly greased the threads.
Bought 2 of these sturdy locking hitch pins to secure a drop hitch to my motorhome's receiver tube and the other to secure the ball mount to the drop hitch. They are quite stout and made from high grade stainless steel. No sign of rust on either one after being exposed to FL weather. It would have been better if they used the same key, but that option wasn't available when I purchased them. I find locking/unlocking them to be very finicky. The main issue is the spring-assisted lock cylinder. It pops completely out of its barrel when unlocked, and if you're not careful, the spring shoots off never to be found again. This has happened to both of my locks. In short, they are well-made but suffer from a poor locking design.
Overall this is a great hitch lock. I purchased it primarily because it is stainless steel, rather than plated steel like my old lock, which ended up with a lot lot of surface rust. I like the "push button" lock feature as it allows you to lock the lock without a key and visually tell that it is locked. There is one potentially major flaw with this lock that I did report to etrailer months ago and I do not know if has been addressed. After winter I tried to unlock the lock and could not do so (the locking button would not pop out). It took me about an hour of fiddling with it, using WD 40, to get the thing open. Evidently a bit of water got into the lock and although most of the lock is stainless steel the little spring-loaded ball bearing that actually engages the locking mechanism is not. It had rusted quite severely. Since then I've kept the inside of the lock well greased and it's worked OK. The ball bearing should also be stainless. This little oversight could be a huge deal if you were on a trip and couldn't unlock your hitch from your vehicle.
I have another model that I bought elsewhere and it is easy to see the quality difference on this model versus others. Although a lock won't completely stop a thief it will slow them down or at least have them go elsewhere and this one will for sure slow them down.
Robert B.
12/9/2017
Considering they are locks and my trailerboat have not been stolen I would say they are holding up fine. No issues with them so after a year they are still doing well. Thank you for asking.
Takes a little fiddling to get the knack for operating this locking pin, but once you get the hang of it, it is no problem.
Richard
1/22/2021
As has been said by others, the lock takes a bit of getting used to, but once you have done it a couple of times it is a breeze! Stainlss steel ensures no more rusty hands every time I do any trailering. I and I really enjoy not having to remove my nice aluminum hitch and SS Convert-a-Ball at every stop for fear someone will steal it! The convenience and peace of mind is well worth the price!
Lock mechanism was a bit stiff, and inserting the key took some force, but fit was secure once I had it on. Finish is excellent, plastic cap for the keyhole is decent construction and long enough that it shouldn't come off easily.
Erik
12/1/2021
Year later: Bolt held up perfectly fine. Cap still completely secure. Overall would buy this again
This is a solid pin sold by a great vendor. Very strong and doesn't trust. (I don't leave my ball mounts in the receivers 24/7/365) Didn't give it 5 starts due to the small amount of fiddliness I get while trying to work the jet to unlock it. Usually have to use one hand to hold the lock barrel still and the other hand to work the key it else the entire barrel keeps turning. Not the end of the world it a tiebreaker.
Do you have a question about this Trailer Hitch Lock?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
1/7/2022
This lock has a inside pin length of 2.50 inches while the Infinite rule lock part # 34061072-D has an inside pin length of 3.125 which works well with factory 2.5 hitch receivers.
Helpful Links
p-34061072-D.html