Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control the level of grease in your axle hub.
Features:
Specs:
Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub. To adjust the amount of grease in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8".
The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel and diluting the grease.
An automatic pressure-relief feature is built into the Bearing Buddy. When the device is full, grease will seep around the edges of the piston and into the barrel. This prevents overfilling that can damage the inner seal.
You can manually check the grease level in your Bearing Buddy by pressing on the edge of the piston. If you can rock or move the piston, the hub is properly filled.
Average Customer Rating: 4.9 out of 5 stars (352 Customer Reviews)
Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control the level of grease in your axle hub.Perfect fit For Heavy duty 1720lbs Harbor Freight Trailers. less then 10 min to install and fill with grease. etrailer needs to up date the web page to add HARBOR FREIGHT Trailers so people know where to find them My Hats off to etrailer for fast shipping and a Great price Thanks
Stellar eTrailer.com Tech and Customer support and quality product.
I have an imported folding trailer (HF 90154) & they do not stock protective hub covers for their trailer.
I contacted their customer support they provided me the hub dimensions (dust cap by diameter 52mm) , I then shared that info with etrailer tech support who directed me to the right bearing buddy product that I needed (2.047" or part# BB2047).
They shipped and delivered it in a timely manner. I installed it this morning and it seems to be working flawlessly as I would have expected from bearing buddy!
Added N.
4/8/2014
part number BB2047 will fit the following Harbor Freight Trailers.. 90154, 42709, 90153.42708, 2575 and 2948, as all those trailers use the same Harbor Freight replacement dust cover, received mine and they installed with little effort great product..Thanks etrailer,com
Rick S.
2/20/2015
A year later and the bearing buddy is doing its job with no issues to report! I know where to go when I need expert Trailer assistance - eTrailer!
Bearing Buddy is a good product. I had to use a block of wood and a small sledge hammer to put them on. They would not go on with a rubber mallet.
I measured 2.045" and the closest one from Bearing Buddy was 2.047"They are on and will not come off.... The trailer is a kit that I bought at depot in 1997... I would recommend
this product
Barth T.
7/11/2014
theses also work for the northern tool 5 x 8 trailer... hard to find this sizethanks fits great
These are fantastic and actually fit the harbor freight hubs which are tough to fit. I bought these after losing the original hub covers and then suffering a complete bearing malfunction on a rafting road trip. Lesson learned. These allow me to keep the bearing greased on a regular basis with no mess. Easy to use and they create a vacuum to protect everything inside. Very intuitive.
Fast Shipping. Installation easy, fits well, grease expanded into cap just as described. Looking forward to many years of bearing life without having to pack the bearings again and again.
Hjrjolie
6/8/2020
Working great! Check the bearing buddy before and after using trailer and keep them filled. Couldnt be happier with my results. I feel confident I wont have any bearing failure for lack of grease!
Prompt shipping, fair price, accurate advertising
The Bearing Buddy fit my little Harbor Freight Tag a Long trailer perfectly.
Your fitment description was spot on.
Thanks!
Dirtstiff
2/18/2018
Bearing Buddy through trailer have given my little tag a long MC trailer trouble free confidence
Well made and a tight fit. Just what you want. Line it up properly and use a dead blow hammer and in it goes.
Myself, I have been looking for nearly 3 years for the correct size, 2.047 and it was my friend that located your site. Both went on very snug. In the past I would purchase smaller ones and twist the
inner surface and shove them on with little effort and then fly off during my travels. These Bearing Buddys went on Solid ! Harbor Freight wasn't any help at all.
Another prompt delivery of your quality product. Pleased as usual
Julie
10/24/2023
Best ever. No leakage. Stayed put
Mike L.
11/11/2023
awesome addition and so much better than doing the old-school method of packing the bearings with grease.
Easy installation and work great
Very tough to find size bearing cover. Not even the Specialty trailer shop in my area didnt have them. etrailer had them and shipped them out fast. Great website made finding what I need easy.
Quick delivery, great price. Using on hubs of a pull behind motorcycle touring trailer to keep the bearings lubed.
This things are great. They arrived just in time and they fit perfectly on my Harbor Freight trailer.
Installed the BB2047 Bearing Buddies on a Detail K2 MMT 5x7 trailer.
The trailer hub has a 1/8" grease fitting on the backside which is inaccessible even to a contortionist and the maintenance instructions call for repacking the wheel bearings by hand annually or every 2000 miles.
The best alternative for a 75 year old arthritic was obviously the Bearing Buddies.
They arrived as promised and each grease cap was changed out in less than 2 minutes.
The annual repack will be replaced with a couple of strokes of the grease gun on occasion as needed.
It doesn't get any easier than that.
Al F.
8/26/2018
Working out just fine. Need to be less generous with my grease applications to avoid excess passing the rear seals and getting thrown onto the back side of my wheel rims.
The Model 2047 Bearing Buddy bearing protectors were a perfect fit for the wheel hubs on the Harbor Freight heavy-duty trailer that I am using as the base for my new home-built teardrop camper. Installation was straightforward and only took a few minutes per side. I am looking forward to many years (and miles) of trouble-free wheel bearings now that these bearing protectors are installed.
Steve D.
3/28/2016
Bearing Buddy is still doing its thing after a 7136.5-mile trip out West over 34 consecutive days during the Summer of 2015. A shorter, 1500-mile roundtrip was made to SC in December. Overall, Im totally satisfied with the Bearing Buddy x2 performance thus far and cant wait for the weather to warm up a little more to take my little tear camper back on the road. Ill be heading east to New England this summer.
Well made, heavy duty. Fit well no trouble installing. Still in the hub after lots of bumpy road travel.
they fit perfectly, thanks to other reviews about Harbor freight trailors.
I am very pleased with the bearing buddy. I had lost the bearing cap and couldn't find a replacement at any auto shop. However, the BB2047 fit perfectly and keeps my bearings lubricated continuously. Replacing the cap did force me to repack the bearing, but that was probably a good thing as water had gotten in there. I feel the bearing buddy will protect my bearings probably for the life of the trailer; and since the grease is under positive pressure, water won't get in there.
Keith V.
6/21/2021
The bearing buddies have worked flawlessly, my trailer is used not only on the road, but in the woods and dusty locations. The bearing buddies have never ped off, and keep the bearings well lubricated a clean.
Excellent upgrade for my utility trailer. Easy to install and a very beneficial way to monitor and add grease to the wheel bearings. I previously had to pull off the trailer wheels to repack the bearings with grease but now I add a few pumps of grease before every road trip. My bearings will last longer and I have peace of mind. Great product!
Brian B.
4/27/2018
Absolutely great!
Fit perfectly on my 1195 lb. 4x8 foldable trailer. Tapped them in with a wood block and hammer, filled with grease, and installed the rubber covers--all done in less than 5 minutes. Haven't road-tested yet, but no reason to expect any problems.
Steve L.
8/16/2018
After 1 year and several hundred miles, theyre still doing great. Very pleased.
The Bearing buddy I purchased looked good but are slightly larger that than the ID of the trailer hub that intended for. I measured it, and did internet searches on the trailer and Bearing buddy was the answer. That said, the Bearing buddy OD appears slightly larger than specified if my caliper measurement is correct. Wasted my money unless I am able to turn down the OD of the bearing buddy. It does look to be a quality product.
Mike L.
5/20/2019
This Bearing Buddy is intended to fit a 2.047 hub bore that uses a 07204 bearing race, and is meant to be a very snug fit, to the point where its suggested that a mallet or a dead blow hammer and a block of wood be used to drive it into place.
Just received the pair of Bearing Buddy Protectors for my HarborFreight 1720lb trailer (#94564) - fit perfectly! Took less than five minutes to install, they have a nice tight seal and are now loaded with grease. Looking forward to having almost maintenance-free bearings!
Bill
11/14/2015
Still working great after a year, Ive had no maintenance issues and have just added grease when needed. Would highly recommend!
I was very impressed with my transaction with etrailer. Certainly, the customer service rep was the key to my satisfaction. She was knowledgeable, SO courteous! The bearings were a perfect fit! All is well and I will shop with etrailer again
Steve
8/28/2019
Great !!!! Such a small feature for a great deal of security in knowing that the bearings will no fail. Been There, Done That !!!
After trying to buy bearing protectors at Harbor Freight, (my mistake) they don't even sell the right size for their trailers. I saw on the etrailer forums that several others had the same issue and the techs had recommended the correct size. They came in this week and I installed them. They were very snug, but once lined up they went right in. Worry free now.
Andrew
4/6/2022
Still going, no issues.
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Matt
8/13/2023
1 yr review still work prefect and looking like new only added a 12 of shot of grease to each side Great price at etrailer Thanks Again